• Journal of Animal Environmental Science
• /
• v.18 no.1
• /
• pp.45-56
• /
• 2012

This study was conducted to give basic information of the animal manure management by manure units determination for recycling farming in Cheorwon-gun. Manure units (MU) are used in the permitting, registration, and the environmental process because they allow equal standards for all animals based on manure nutrient production. An MU is calculated by multiplying the number of animals by manure unit factor for the specific type of animal. The manure unit factor for MU determination was determined by dividing amounts of manure N produced 80 kg N/year. Conversion to manure units is a procedure used to determine nutrient pollution equivalents among the different animal types. In this study, the manure unit factor based on nitrogen in Hanwoo, dairy cow, pig were 0.36, 0.8 0.105, respectively. The analysis of manure unit per ha shows that the N loading by MU is quite different by region. The nitrogen loading of manure unit (MU) per ha of cultivated land was the highest in the Galmal-eup on province with 2.4 MU/ha, which is higher than the appropriate level. The Seo-myeon province came next with 1.92 MU/ha. To be utilized as a valid program to build the recycling farming system, diverse measures shall be mapped out to properly determine manure units, evaluate N-loading and to properly manage their nutrient balance of each region.

• Journal of Biosystems Engineering
• /
• v.22 no.1
• /
• pp.21-29
• /
• 1997

왕겨 재를 분쇄하여 콘크리트 混和용 재료로 이용하려는 연구의 일환으煙로서, 파이로트 規模의 多目的 왕겨 燒却爐를 設計, 裂作하고 그 性能을 分析하였다. 왕겨 燃燒時의 熱에너지는 回收하여 원예施設의 煖房이나 콘크리트의 高溫 養生水로써 이용하고자 熱交煥裝置를 제작하여 왕겨 燒각爐시스템에 장착하였고, 排煙가스내의 이산화탄소가 시설원예 作物의 光合成에 이용될 수 있는지 排煙가스의 造成을 조사하였다. 분쇄된 왕겨 재의 큰크리트 混和材로서의 적합성은, 燃燒 灰分의 성분 중 $SiO_2$ 의 結晶化 상태를 分析함으로써 判斷하였다. 연구결과를 要約하면 다음과 같다. 1. 왕겨 灰分의$SiO_2$ 結晶化는 燃燒온도 $750^circ C$ 이하에서는 거의 발생하지 않는 것으로 분석되었다. 2. 燒却爐의 작동은 매우 만족스러웠으며 最適 작동조건은 왕겨供給率 15kg/h. 制御온도 $600^{\circ}C$로 分析되었다. 最適 작동조건에서, 왕겨燃燒率은 97%, 熱交換機 效率은 59.5%, 전체 시스템의 熱效率은 57.7%로서 양호하였으며, 灰分의 $SiO_2$ 結晶化도 거의 발생하지 않아 生成된 왕겨 灰分은 훌륭한 큰크리트 混和在로 판단 되었다. 3. 燒却爐내 溫度分布는 대체로 均一하였으며, 排煙가스내의 大氣오염물질 중, 질소酸化物과 황酸化物 함량은 許容기준치보다 매우 낮았으나 일산화탄소 함량은 許容기준값 부근으로 나타나 排煙가스를 직접 원예시설 내에 공급하기 위해서는 약간의 연소실 구조 개선이 필요하다고 판단되었다.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.673-676
• /
• 2020

In this paper, we propose a whole-body management system using ultra-low temperature cyclical cooling method combined with IT technology. The proposed system has the following characteristics. First, it minimizes maintenance costs by circulating nitrogen gas cooled by ultra-low temperature inside the controller. Secondly, based on the information measured by the temperature sensor and oxygen concentration sensor, nitrogen gas is supplied to provide safe ultra-low temperature whole-body management. Thirdly, after entering the user's height, it provides convenient, ultra-low temperature whole-body care that can be controlled using an automatic lift. Fourth, it provides an easy-to-access, easy-to-manage GUI and a manager-only web program for whole-body management system operation. The results tested by the authorized testing agency to assess the performance of the proposed system were measured in the range of ±5%, the world's highest temperature sensor accuracy, and a range of -110℃ to -150℃ greater than the world's highest whole-body management temperature range(-110℃ ~ -140℃). In addition, humidity was measured at less than 40%, the world's highest, and oxygen concentration was more than 18%, the world's highest. Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.58-64
• /
• 2007

Propellant pressurization system in liquid rocket propulsion system plays a role supplying pressurant gas at a controlled pressure into the ullage space of propellant tanks. The most important design parameter for such propellant pressurization system is the temperature of pressurant gas fed from pressurant tank, which is placed inside of cryogenic propellant tank. Such pressurant is gaseous state, of which density is very sensitive to the temperature of pressurant. Previous investigation dealt with thermal correlation of pressurant and external fluid at room temperature. This study investigates the temperature variation of cryogenic pressurant (GHe) at the time when the pressurant is coming out of pressurant tank, which is submerged in a liquid oxygen, experimentally as well as numerically.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.2
• /
• pp.54-61
• /
• 2007

Propellant pressurization system in liquid rocket propulsion system plays a role supplying pressurant gas at a controlled pressure into the ullage space of propellant tanks. The most important design parameter for such propellant pressurization system is the temperature of pressurant gas fed from pressurant tank. Such pressurant is gaseous state, of which density is very sensitive to the temperature of pressurant. Generally for the propulsion system, which requires high thrust and is consisted of cryogenic propellant the pressurant is stored at high density and high pressure to reduce the weight of pressurant tanks, which are placed inside of cryogenic propellant tank. That is called cryogenic storage pressurization system. This study investigates the temperature variation of pressurant at the time when the pressurant is coming out of pressurant tank experimentally as well as numerically. Fluids used in this study are air and liquid oxygen as outer fluid and gaseous nitrogen and gaseous helium as pressurant respectively.

• Journal of Aquaculture
• /
• v.18 no.2
• /
• pp.122-129
• /
• 2005

Ammonia is the major limiting factor in intensive aquaculture production systems. Therefore, quantification of ammonia excretion is important for the water quality management in aquaculture systems. Ammonia excretion is known to be affected by many factors such as body weight and dietary protein level (DPL). In this study, experiments were carried out to investigate the effects of body weight and DPLs on the rates of ammonia excretion of Nile tilapia Oreochromis niloticus. Three sizes of fishes (mean initial weight; 4.8 g,42.7 g and 176.8 g) were fed each of two dietary protein levels (30.5% and 35.5%). Daily feeding levels for the three fish sizes of 4.8 g, 42.7 g and 176.8 g were 6%, 3%, and 1.5% body weight per day, respectively. Each group of fish was stocked in a 17.1-L aquarium and all treatments were triplicated. Following feeding, the weight-specific ammonia excretion rate of O. niloticus increased, peaked at 4 to 8 h, and returned to pre-feeding levels within 24 h. Total ammonia nitrogen (TAN) excretion.ate per unit weight decreased with the increase of fish weight for each diet (P<0.05). The TAN excretion rate increased with increasing dietary protein content for each fish size (P<0.05). TAN excretion rates (Y) for each diet with different fish weights were described by the following equations: low DPL diet (30.5%): $Y\;(mg\;kg^{-1}\;d^{-1})=955.69-147.12\;lnX\;(r^2=0.95)$, high DPL diet (35.5%): $Y\;(mg\;kg^{-1}\;d^{-1})=1362.41-209.79\;lnX\;(r^2=0.99)$. Where: X=body weight (g wet wt.). The TAN excretion rates ranged 28.5%-37.1% of the total nitrogen ingested for the low DPL diet (30.5%) and 37.4-38.5% for the high DPL diet (35.5%). Total nitrogen losses of fish fed the high DPL diet $(35.5%;\;0.26\sim0.91g\;kg^{-1}\;d^{-1})$ were higher than those fed the low DPL diet $(30.5%;\;0.22\sim0.68g\;kg^{-1}\;d^{-1})$. The losses decreased per kg of fish as fish size increased. Results will provide valuable information fer water quality management and culture of Nile tilapia in recirculating aquaculture systems.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.415-419
• /
• 2001

To produce staphylokinase (SAK) in B. subtilis WB700, media optimization was carried out and the operation of batch and fed-batch fermentation were compared. Tryptone is a good nitrogen source and its optimum concentration in modified super rich(MSR) media is 15 g/L. When glucose is used as a limiting carbon source in the MSR media, 5 g/L of an optimum glucose concentration was identified for the SAK production under the control of P43 promoter. As the expression of P43 promoter is controlled by the limitation of oxygen, the SAK production was controlled at the 30% DO level in the fed-batch fermentation. Unexpectedly, batch fermentation using MSR media showed 1.5 times higher yield of SAK than that of the fed-batch fermentation. The main cause of the results comes from not achieving higher cell concentration in the fed-batch fermentation and the optimum expression level of P43 promoter under oxygen or nutrient limitations. We could not achieve the increase in cell concentration by any means in batch culture as well as fed-batch culture. The highest yield in the batch culture was 2880 units of SAK activity and 455 mg/L of secreted SAK.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.3
• /
• pp.165-171
• /
• 2020

Maintaining steady and low temperature during distribution process is a key technique to inhibit microbial growth, one of the most important factors in determining the shelf life. It is possible to provide high-quality fresh products to consumers only when precise and adequate temperature control is guaranteed throughout the entire distribution process for fresh seafood. This study investigated the shelf-life of packaged fresh flounder (Paralichthys Olivaceus) in order to learn the feasibility of super-chilled distribution of fresh seafood. To estimate the shelf life, weight, number of bacteria such as E. coli, pH, sensory test and volatile basic nitrogen were investigated. As a result of the study, the difference in shelf life of 6 days at the super-chilling temperature (0±1℃) and 1 day at the general refrigeration temperature (8±2℃) (based on volatile base nitrogen) showed the market possibility of super-chilling distribution. Through additional empirical studies such as packaging methods and economic feasibility, it is expected to promote commercialization of super-chilling containers and packaging system developed in the future and secure customer reliability.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.19-38
• /
• 2023

Nitrous oxide, one of the six greenhouse gases from Kyoto protocol, is known to be emitted in biological nitrification and denitrification reactions at wastewater treatment plant. In this study, EQPS which is a computer program that can simulate nitrous oxide gas emission amount at wastewater treatment plants is used. The MLE process which treats wastewater from combined sewer is studied. Operational variables which are MLR, water temperature at reactor and primary clarifier by-pass percentage are changed to define the condition which produces the least amount of nitrous oxide gas. 200 % of MLR, 20 ℃ of water temperature at bioreactor and 15 % of primary clarifier by-pass percentage are shown the least nitrous oxide emission factor. Also, it is found that the deep aeration tank produces less amount of nitrous oxide gas since less air is required to meet oxygen demand in this type of aeration tank.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.646-652
• /
• 2022

The dead-end anode (DEA) system is a method that closes the anode outlet and supplies fuel by pressure. The DEA method could improve fuel usage and power efficiency through system simplification. However, flooding occurs due to water and nitrogen back diffusion from the cathode to the anode during the DEA operation. Flooding is a cause of decreased fuel cell performance and electrode degradation. Therefore, tthe structure and components of polymer electrolyte membrane fuel cell (PEMFC) should be optimized to prevent anode flooding during DEA operation. In this study, the effect of a porous flow field with metal foam on fuel cell performance and fuel efficiency improvement was investigated in the DEA system. As a result, fuel cell performance and purge interval were improved by effective water management with a porous flow field at the cathode, and it was confirmed that cathode flow field structure affects water back-diffusion. On the other hand, the effect of the porous flow field at the anode on fuel cell performance was insignificant. Purge interval was affected by metal foam properties and shown stable performance with large cell size metal foam in the DEA system.