• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.628-636
• /
• 2008

Anaerobic denitrification in a two phase anaerobic digestion(TPAD) process combined with biological nutrients removal (BNR) system was studied for a piggery wastewater treatment. Denitrification efficiency and the effects of the nitrified effluent on acidification was investigated by recycling the nitrified effluent to the acidogenic reactor. Recycle of the nitrified effluent to the acidogenic reactor enhanced the conversion efficiency of the influent COD into volatile fatty acids(VFAs) in the TPAD-BNR system treating the piggery wastewater. Acidification rate of the acidogenic sludge acclimated with the nitrified effluent showed 6 times higher than that acclimated without it. VFA could be used for denitrification as carbon sources, however, nitrate could enhance acidification activity in the acidogenic reactor. VFA production rate was affected on the COD/Nitrate(COD/N) ratio, however, it depended much more whether the acidogenic sludge acclimated with nitrate or not. Denitrification with the acidogenic sludge acclimated without nitrified effluent followed zero-order reaction and the reaction rate constants were in the range of 1.31$\sim$1.90 mg/L$\cdot$h. Denitrification reaction rate constants of the acidogenic sludge acclimated with nitrified effluent were 3.30 mg/L$\cdot$h that showed almost twice of them evaluated from the previous tests. The stoichiometric ratios of utilized COD to removed nitrate showed similar in both tests which were in the range of 5.1$\sim$6.4 at COD/N ratio of 10.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.363-366
• /
• 2003

본 연구는 membrane bioreactor (MBR)을 질산화 위주로 운영하면서 질소폐수 처리 과정에서 나타나는 MBR의 운전특성 및 처리효율을 검토하고, 아울러 경제적인 질소처리 방법인 아질산화를 유도하기 위한 조건을 탐색하는 것이다. 반응기의 유효부피 8 L, 체류시간을 12시간으로 고정하고 유입폐수 중의 암모니아 농도를 증가시키는 방법으로 암모니아 부하를 $2\;kg/m^3{\cdot}day$까지 증가시켜 보았다. 운전 중반부에 이유를 명확히 알 수 없는 슬러지의 활성 저하 기간을 제외하고는 거의 98% 이상의 질산화 효율을 나타냈으며, 2 kg 이상의 암모니아 부하에서는 효율이 감소하였다. pH 조절, 유입수의 암모니아 농도 및 부하 조절에 의해 MBR 내의 free ammonia (FA) 농도를 변화시켜, FA 저해에 의한 유도한 아질산화는 매우 불안정하게 이루어졌다. 반면에, 공기 공급량을 변화시켜 반응기 내의 DO를 낮추는 방법으로 유도한 아질산 축적은 안정적인 경향을 보여 MBR에서 적절한 운전전략으로 판단된다.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1085-1089
• /
• 1998

The well-established nitric acid-sulfuric acid mixed acid process for the nitration of aromatic compounds has serious problems due to the large amount of waste acids and severe reaction conditions. Nitration of toluene can be conducted using nitrogen dioxide and ozone instead of mixed acid. We found that conc. nitric acid increased the reactivity as catalyst and the amount of nitrogen dioxide controlled the extent of nitration. Dinitration proceeded to more than 92 mole % conversion within 2 hr at $0^{\circ}C$ with 6 eq. of nitrogen dioxide and 2 eq./hr of ozone flow. Toluene completed mononitration within 30 min using 3 eq. of nitrogen dioxide, 3 eq. of nitric acid, and 1.5 eq./hr of ozone flow. As a clean process of aromatic nitration, this method is expected to replace the present process which causes the environmental problems.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.4
• /
• pp.19-25
• /
• 2007

Process analysis with ASM3 (Activated Sludge Model3) was performed to offer basic data for the optimization of aerated biofilter (ABF) process design and operation. This study was focused on the simulation of the nitrification reaction in ABF which was a part of the advanced nutrient treatment process using bio-adsorption. The ABF process has been developed for the removal of suspended solids and nitrification reaction in sewage. A GPS-X (General Purpose Simualtor-X) was used for the sensitivity analysis and operation assessment. Sensitivity of ASM3 parameters on ABF was analysed and 4 major parameters ($Y_A$, $k_{sto}$, ${\mu}_A$, $K_{A,HN}$) were determined by dynamic simulation using 70 days data from pilot plant operation. The optimized values were 0.14 for $Y_A$, 3.5/d for $k_{sto}$, 2.7/d for ${\mu}_A$ and 1.1 mg/L for $K_{A,HN}$, respectively. Simulation with optimized parameter values were conducted and TN, $NH_4{^+}-N$ and $NO_3{^-}-N$ concentrations were estimated and compared with measured data at the range of 10 min to 4 hrs of hydraulic retention time (HRT). The simulated results showed that optimized parameter values could represent the characteristics of ABF process. Especially, the ABF showed relatively high nitrification rate (60%) under very short HRT of 10 min. As a consequence, the ABF was thought to be successfully used in the site which having high variation of influent loading rate.

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.421-427
• /
• 2015

In ASM model, organic matters are classified according to their characteristics and general classification into COD and BOD cannot satisfy conditions required by ASM. In this study, it was performed to study classification of organic matters required by ASM on the basis of microorganisms' respiration rate subject to wastewater and sludge treatment. As results of analysis of the organic matter's appearance, it was found that there were some differences in composition of organic matters between wastewaters. It is considered that it is an important characteristic of wastewater that should be understood in treating wastewater in each process. Therefore, it is considered that appearance of organic matters in each wastewater identified by this study will be used as important basic data for operation of municipal wastewater treatment plant. It was identified that SS was an important factor affecting nitrification through organic matter and ammonium nitrogen change analysis according to reaction time in the nitrification. It is considered that the nitrification has close relationship with choice of optimal retention time.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.1
• /
• pp.15-25
• /
• 2006

This study was initiated to evaluate the effect of HRT(hydraulic retention time) on removal efficiencies of organic matter (C), nitrogen(N) and phosphorus(P) in municipal wastewater for suspenced-growth processes(MLE; Modified Ludzack-Ettinger) and hybrid process(Modified-Dephanox). M-Dephanox process was designed to improve the performance of Dephanox process on denitrification efficiency. As the results, removal efficiencies of C, N and P in M-Dephanox process, which is hybrid process, were higher than those in MLE, which is suspended-growth process. Especially, nitrification inhibition of MLE was observed more severely than M-Dephanox as hydraulic retention time was reduced from 6 hr to 3.5 hr. Nitrification in nitrification reactors on M-Dephanox, at short HRT, was so excellent that ammonia nitrogen removal efficiency in nitrification reactors of M-Dephanox was about 92% at 1.59 hr of HRT of nitrification reactors, however, nitrification in nitrification reactors on M-Dephanox was affected severely by organic matter entering to nitrification reactors from downstream settler. It was observed that reducing of HRT in whole process resulted from reducing of HRT in nitrification reactors on M-Dephanox.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.10a
• /
• pp.213-214
• /
• 2000

총 암모니아성 질소(TAN)은 고밀도 양식에서 한계요소로 작용하는 수질인자 중의 하나이다. 생물학적 처리법에 의한 암모니아의 제거는 순환여과식 양식 시스템의 설계에서 가장 중요한 부분이다. 효율적인 순환 여과식 양식 시스템을 위해서는 생물반응기의 질산화 속도식을 구하여 적정한 용량의 처리시스템을 설계하여야 한다. (중략)

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.1
• /
• pp.53-60
• /
• 2000

The effects of ammonia loading on nitrification, especially on nitrite build-up, in an activated carbon fluidized bed reactor were investigated by increasing the ammonia loading rate stepwise from 0.1 to $7.5kg\;NH_3-N/m^3{\cdot}day$. Although effluent nitrite concentration and nitrification efficiency fluctuated at the loading rates above $1.8kg\;NH_3-N/m^3{\cdot}day$, an average nitrification efficiency of 90% was achieved. Nitrite build-up began at an ammonia loading rate of $l.8kg\;NH_3-N/m^3{\cdot}day$, at which the free ammonia concentration was estimated to be above 1 mg/L. During the nitrite build-up, the ratio of influent $NH_3-N$ concentration to the DO concentration of the reactor liquor and the ratio of effluent $NH_3-N$ concentration to the DO concentration of the reactor liquor was measured to be above 100 and 2, respectively. Considering the advantages of nitritation/denitrification, a fluidized bed reactor could be an effective means for biological nitrification of wastewaters with high ammonia concentration.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.3
• /
• pp.7-15
• /
• 2009

The objective of this study was to investigate difference in nitrogen, organic, phosphorus and $NH_3$-N removal efficiency according to organic loading, comparing M-DEPHANOX process which has two nitrification reactor with M-eBNR process which has one nitrification reactor. As a result of this study, $NH_3$-N removal efficiency of M-DEPHANOX and M-eBNR resulted in average level of 91.8%, 96.9%, respectively. M-DEPHANOX and M-eBNR processes showed high removal efficiency in view of $NH_3$-N removal efficiency. Comparing organic removal efficiency by M-DEPHANOX and M-eBNR processes, the average removal efficiency in terms of TCOD, SCOD was 84.1%, 78.2% and 83.4%, 75.6%. Also, the results that observed about $NH_3$-N removal efficiency regarding organic loading revealed that nitrification reactor of RBC type are little influenced by flowing organic without precipitating at settling tank. Therefore, although inflow characteristics of municipal wastewater changes, M-eBNR process appeared to remove $NH_3$-N reliably.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.414-420
• /
• 2006

Effluent from an anaerobic digestion system with an elutriated phased treatment(ADEPT, Anaeorbic Digestion Elutriated Phase Treatment) for piggery waste treatment using anaerobic ammonium oxidation(ANAMMOX) process was used as a substrate of partial nitrification reactor. In mesophilic condition($35^{\circ}C$), controlling parameters of nitrite accumulation were HRT, pH, free ammonia(FA) and hydroxylamine rather than dissolved oxygen. Bicarbonate alkalinity consumption ratio including bicarbonate stripping and buffering was 8.78 g $Alk._{comsumed}/g\;NH_4-N_{converted}$. In steady state for 1 day of HRT and $2.7{\sim}4.4mg/L$ of DO, $NO_2-N/NH_4-N$ ratio of partial nitrification effluent was about $1{\sim}3$, which was applicable to ANAMMOX reactor influent for the combined partial nitrification-ANAMMOX process.