• Computational Structural Engineering
• /
• v.8 no.2
• /
• pp.123-132
• /
• 1995

Genetic Algorithms(GA), which are based on the theory of natural evolution, have been evaluated highly for their robust performances. Traditional GA has mostly used binary code for representing design variable. The binary code GA has many difficulties to solve optimization problems with continuous design variables because of its large computer core memory size, inefficiency of its computing time, and its bad performance on local search. In this paper, a real code GA is proposed for dealing with the above problems. So, new crossover and mutation processes of GA are developed to use continuous design variables directly. The results of read code GA are compared with those of binary code GA for several single and multiple objective optimization problems. As a result of comparisons, it is found that the performance of the real code GA is better than that of the binary code GA, and concluded that the real code GA developed here can be used for the general optimization problem.

• Journal of Environmental Impact Assessment
• /
• v.26 no.1
• /
• pp.44-56
• /
• 2017

Sustainable development is important because the ultimate objective is efficient development combining the economic, social, and environmental aspects of urban conservation. Despite Korea's rapid urbanization and economic development, the distribution of resources is inefficient, and land-use is not an exception. Land use distribution is difficult, as it requires considering a variety of purposes, whose solutions lie in a multipurpose optimization process. In this study, Yangpyeong-eup, Yangpyeong, Gyeonggi-do, is selected, as the site has ecological balance, is well-preserved, and has the potential to support population increases. Further, we have used the genetic algorithm method, as it helps to evolve solutions for complex spatial problems such as planning and distribution of land use. This study applies change to the way of mutation. With four goals and restrictions of area, spatial objectives, minimizing land use conversion, ecological conservation, maximizing economic profit, restricting area to a specific land use, and setting a fixed area, we developed an optimal planning map. No urban areas at the site needed preservation and the high urban area growth rate coincided with the optimization of purpose and maximization of economic profit. When the minimum point of the fitness score is the convergence point, we found optimization occurred approximately at 1500 generations. The results of this study can support planning at Yangpyeong-eup.ausative relationship between the perception of improving odor regulation and odor acceptance.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.45-51
• /
• 2011

This paper proposes a method to accelerate the evolution speed of individuals through hybrid reproduction of monogenesis and gamogenesis. Monogenesis as a reproduction method that bacteria or monad without sexual distinction divide into two individuals has an advantage for local search and gamogenesis as a reproduction method that individuals with sexual distinction mate and breed the offsprings has an advantages for keeping the diversity of individuals. These properties can be properly used for improvement of evolution speed of individuals in genetic algorithms. In this paper, we made relatively good individuals among selected parents to do monogenesis for local search and forced relatively bad individuals among selected parents to do gamogenesis for global search by increasing the diversity of chromosomes. The mutation probability for monogenesis was set to a lower value than that of original genetic algorithm for local search and the mutation probability for gamogenesis was set to a higher value than that of original genetic algorithm for global search. Experimental results with four function optimization problems showed that the performances of three functions were very good, but the performances of fourth function with distributed global optima were not good. This was because distributed global optima prevented individuals from steady evolution.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.236-244
• /
• 2005

In this study, we introduce a new topology of Fuzzy Polynomial Neural Networks(FPNN) that is based on fuzzy relation and evolutionally optimized Multi-Layer Perceptron, discuss a comprehensive design methodology and carry out a series of numeric experiments. The construction of the evolutionally optimized FPNN(EFPNN) exploits fundamental technologies of Computational Intelligence. The architecture of the resulting EFPNN results from a synergistic usage of the genetic optimization-driven hybrid system generated by combining rule-based Fuzzy Neural Networks(FNN) with polynomial neural networks(PNN). FNN contributes to the formation of the premise part of the overall rule-based structure of the EFPNN. The consequence part of the EFPNN is designed using PNN. As the consequence part of the EFPNN, the development of the genetically optimized PNN(gPNN) dwells on two general optimization mechanism: the structural optimization is realized via GAs whereas in case of the parametric optimization we proceed with a standard least square method-based learning. To evaluate the performance of the EFPNN, the models are experimented with the use of several representative numerical examples. A comparative analysis shows that the proposed EFPNN are models with higher accuracy as well as more superb predictive capability than other intelligent models presented previously.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.441-447
• /
• 1999

본 논문은 복잡 적응 시스템의 분석 및 모델링을 위해, 인공생명의 기본 패러다임인 셀룰라 오토마타를 선택하여, 무정형의 구조를 가지며 투명한 자료 전파 특성을 갖는 셀룰라 신경 회로망의 설계하고 개발하는데 중점을 두었다. 우선, 신경 회로망의 불규칙한 구조를 발생학적으로 다루어 무정형의 은닉층을 생성하고, 다윈의 진화론을 적용하여 구조적 진화 및 선택을 통해 최적화된 신경 회로망을 설계하였다. 주변 셀의 상태를 감지하여 자신의 상태를 수정해나가는 방식의 셀룰라 오토마타의 투명한 신호 전파 모델로 자료 및 오차의 역전파에 적용하도록 고안하였고, 라마르크의 용불용설을 활용한 오차의역전파 학습 알고리즘을 유도하였다. 이러한 복잡 적응계의 학습 과정을 유도하여 시뮬레이션에서 그 타당성을 입증하였다. 시뮬레이션에서는 신경 회로망의 XOR 문제와 다중 입력 다중 출력 함수에 대한 근사화 문제를 풀었다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.335-347
• /
• 2003

본 논문에서는 설계 하중에 지배되는 구조물에 있어서, 입력 파라미터들의 불확실성을 표준편차와 패턴의 변동, 두 차원에서 접근, 처리할 수 있는 방안을 제시하기 위해서 구조물에 입력으로 작용하는 하중 패턴의 결정과 구조물의 형상의 진화를 동시에 고려할 수 있는 Co-Evolutionary Structural Design framework라 명명한 새로운 구조 설계 방식을 개발하였다. 공학자의 직관과 경험 의존적인 하중을 대상으로 최적화된 구조물은, 성능에 완벽한 안전을 보장해 줄 수 없으며, 이에 관한 문제를 해결하기 위해서 주어진 상황 속에서 다양한 하중이 작용하더라도 안전할 수 있는 구조물의 설계 방식에 관해서 설명한다. 본 프레임워크는 연성을 가지는 두 Disciplinary Modules, 즉 구조 형상설계와 하중설계로 이루어지며 하중에 관한 DB로 연결되어 순차적인 MDO 설계과정을 거치게 된다. 두 Discipline은 설계과정을 거치면서 상호 견제의 틀 속에서 진화하며 기존 방식과 달리 극한 하중 패턴을 스스로 찾아서 설계 반영하는 특징을 가진다. 본 접근 방식의 유용성을 평가하기 위해서 10-bar truss 구조물과 Jacket-Type 구조물로 테스트해 보았다.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.826-833
• /
• 2010

Electric-thermal-structural actuated compliant mechanisms are mechanisms onto which electric voltage drop is applied as input instead of force. This mechanism is based on thermal expansion of material while being heated. Compliant mechanisms are designed subjected to electric charge input using BESO(bi-directional evolutionary structural optimization) method. Reliability-based topology optimization (RBTO) is applied to the topology design of actuators. performance measure approach (PMA), which has probabilistic constraints that are formulated in terms of the reliability index, is adopted to evaluate the probabilistic constraints. In this study, BESO method is used to obtain optimal topology of compliant mechanisms from initial design domain. PMA approach is used to evaluate reliability index. The procedure has been tested in numerical applications and compared with the results obtained by other methods to validate these approaches.

• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.40-50
• /
• 2009

Incorrect deployment of RFID readers occurs reader-to-reader interferences in many applications using RFID technologies. Reader-to-reader interference occurs when a reader transmits a signal that interferes with the operation of another reader, thus preventing the second reader from communicating with tags in its interrogation zone. Interference detected by one reader and caused by another reader is referred to as a reader collision. In RFID systems, the reader collision problem is considered to be the bottleneck for the system throughput and reading efficiency. In this paper, we propose a novel RFID reader anti-collision algorithm based on evolutionary algorithm(EA). First, we analyze characteristics of RFID antennas and build database. Also, we propose EA encoding algorithm, fitness algorithm and genetic operators to deploy antennas efficiently. To show superiority of our proposed algorithm, we simulated our proposed algorithm. In the result, our proposed algorithm obtains 95.45% coverage rate and 10.29% interference rate after about 100 generations.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.412-418
• /
• 2011

Reliability-based Topology optimization(RBTO) is to get an optimal design satisfying uncertainties of design variables. Although RBTO based on homogenization and density distribution method has been done, RBTO based on BESO has not been reported yet. This study presents a reliability-based topology optimization(RBTO) using bi-directional evolutionary structural optimization(BESO). Topology optimization is formulated as volume minimization problem with probabilistic displacement constraint. Young's modulus, external load and thickness are considered as uncertain variables. In order to compute reliability index, four methods, i.e., RIA, PMA, SLSV and ADL(adaptive-loop), are used. Reliability-based topology optimization design process is conducted to obtain optimal topology satisfying allowable displacement and target reliability index with the above four methods, and then each result is compared with respect to numerical stability and computing time. The results of this study show that the RBTO based on BESO using the four methods can effectively be applied for topology optimization. And it was confirmed that DLSV and ADL had better numerical efficiency than SLSV. ADL and SLSV had better time cost than DLSV. Consequently, ADL method showed the best time efficiency and good numerical stability.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.46-48
• /
• 2004

본 논문에서는 유한 요소법과 등가회로법을 이용하여 윤곽 진동형 압전 변압기의 특성을 해석하였으며 이를 통해 얻어진 결과를 기반으로 매칭 임피던스와 전기 및 기계적 결합 계수를 계산하였다. 전력 소자로서 사용되는 압전 변압기는 부하 등 특정 목적에 부합하는 정확한 설계가 필요하기 때문에 다중 목적 함수를 갖는 진화 전략을 이용하여 형상 최적화를 수행하였다.