• Journal of the Semiconductor & Display Technology
• /
• v.8 no.2
• /
• pp.11-14
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method at various $Ar/O_2$ ratio. We investigated the effect of deposition condition(specially $Ar/O_2$ ratio) on the structural properties of SBN thin film. As $Ar/O_2$ ratio was increased, the peaks in the XRD pattern became more sharp. Also, the peaks(008)(115)(220) in 80/20 of $Ar/O_2$ ratio were suddenly appeared. The optimum of the rougness showed about 4.33 nm in 70/30 of $Ar/O_2$ ratio. The crystallinity of SBN thin films were increased with the increase of $Ar/O_2$ ratio. Also, Deposition rate of SBN thin films was about 4.17 nm/min in 70/30 of $Ar/O_2$ ratio. The capacitance of SBN thin films were increased with the increase of $Ar/O_2$ ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.509-515
• /
• 2022

As the 4th industrial revolution based on ICT is progressing in the manufacturing field, interest in building smart factories that can be flexible and customized according to customer demand is increasing. To this end, it is necessary to maximize the efficiency of factory by performing an automated process in real time through a network communication between engineers and equipment to be able to link the established IT system. It is also necessary to collect and store real-time data from heterogeneous facilities and to analyze and visualize a vast amount of data to utilize necessary information. Therefore, in this study, four types of controllers such as PLC, Arduino, Raspberry Pi, and embedded system, which are generally used to build a smart factory that can connect technologies such as artificial intelligence (AI), Internet of Things (IoT), and big data, are configured. This study was conducted for the development of a program that can collect and store data in real time to visualize and manage information. For communication verification by controller, data communication was implemented and verified with the data log in the program, and 3D monitoring was implemented and verified to check the process status such as planned quantity for each controller, actual quantity, production progress, operation rate, and defect rate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.160-164
• /
• 2022

In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.143-148
• /
• 2022

For the purpose of treating health checkups and recovery of patients in a super-aged society, hospitals use devices designed with a reduction circuit of electromagnetic waves associated with the specific absorption rate of electromagnetic waves absorbed by the human body. In this paper, we proposed a filter improvement design method capable of reducing electromagnetic waves. As a result of confirming the validity of the proposed technique through simulation and experimental results, the following result values were obtained. Applying the common-mode (CM) inductor 4 mH to a calibration circuit, noise decreased in a multiband spectrum. Using the differential mode(DM) inductor 40 µH element in the primary calibration circuit, the noise decreased by 15 dB or more in the 3 MHz band spectrum. Also, applying the Admittance Capacitance (Y-Cap) 10 nF element in the secondary calibration circuit resulted in the decrease by more than 30 dB in the band spectrum before 2 MHz. After using a common-mode inductor 4 mH element in the tertiary calibration circuit, it decreased by more than 15 dB in the band spectrum after 2 MHz.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.37 no.1
• /
• pp.94-100
• /
• 2024

Recently, as interest in personal hygiene has increased due to the community spread of COVID-19 and variant viruses, fixed and potable UV germicidal equipment to sterilize indoor spaces and hand-held UV germicidal equipment to sterilize household items such as masks and mobile phones are continuously being developed and sold. However, the development and sales of the product are difficult because appropriate testing methods have not yet been established. In this situation, if an uncertified product is distributed in the market, it can cause serious harm to consumers. In this study, we investigate the photobiological risks and safety devices against UV exposure of UV germicidal equipment distributed domestically, and propose appropriate test methods for portable UV germicidal equipment based on the research results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.209-212
• /
• 1995

In this paper, the $(Sr_{0.85}{\cdot}Ca_{0.15})TiO_3$ of paraelectric grain boundary layer (GBL) ceramics were fabricated. The characteristics of electrical conduction and the thermally stimulated current(TSC) were measured respectively. The region I below 200[V/cm] shows the ohmic conduction, the region II between 200[V/cm] and 1000[V/cm] can be explained by the Pool-Frenkel emission theory, and the region III above 2000[V/cm] is dominated by the tunneling effect. As a result, The origins of these peaks are that the ${\alpha}$ peak observed at $-20[^{\circ}C]$ looks like to be ascribed to the ionization excitation from donor level in the grain, and the ${\alpha}^{\prime}$ peak observed at $-20[^{\circ}C]$ appears to show up by detrap of the trapped carrier of border between the oxidation layer and the grain, and the ${\beta}$ peak observed at $80[^{\circ}C]$ seems to be resulted from hopping conduction of existing carrier in the trap site of the border between the oxidation and second phase.

• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.197-205
• /
• 2024

This study examines the impact of corporate ESG performance on debt default risk using a sample of Chinese A-share listed.The I mpact of ESG Performance on Debt Default Risk of Heavy Polluter Firms from 2012 to 2022. The findings show that good ESG performance can effectively reduce firms' debt default risk. Further analysis shows that firms' ESG performance reduces debt default risk by mitigating the impact of financing constraints. This study explores the influencing factors of debt default risk from the perspective of ESG performance, and also enriches the research on the economic impact of corporate ESG performance, providing empirical evidence for the prevention of corporate debt default risk.

• Journal of the Korean Geosynthetics Society
• /
• v.9 no.4
• /
• pp.39-45
• /
• 2010

The effects of non-woven geotextiles on mechanical behavior of sand were investigated. A comprehensive series of triaxial compression tests were performed for these investigation on unreinforced and reinforced sand with geotextiles. The Joomunjin standard sand was used and non-woven geotextiles were included into sand specimen with three layers. The inclusion of non-woven geotextile reinforcement into sand increased the peak strength of sand significantly and the reinforced samples exhibited a greater axial strain at failure. Also the effect on number of reinforcement layers was studied and found as increasing the number of reinforcement layers resulting in more ductility by clogging developed in the shear band within the specimens. It was also found that the tendency of samples to dilate is restricted by non-woven geotextile inclusion. The effect of nunber of reinforcement layer increasing is just same to the effect of decreasing void ratio of sand in this case.

• Conservation Science in Museum
• /
• v.15
• /
• pp.66-77
• /
• 2014

A gujangbok is a king's silk ceremonial robe embroidered with nine symbols that represent the essential virtues that a king needs to govern his country. The National Museum of Korea currently own a gujangbok worn by King Gojong in the late Joseon Dynasty. The robe is painted with various colors, including red, yellow, blue, green, and gray. μ-XRF and analysis was conducted on the pigments, and it was found that the red color was made from cinnabar, the yellow color was gold and brass, the blue color was a blue organic pigment and white lead, the green color was a synthetic pigment composed of copper and arsenic, and the gray color pigment was silver. Also, the pigments were compared to those used to make the patterns of a queen's ceremonial robe and a front cloth panel, both made around the same time and also owned by the National Museum of Korea. The comparative analysis revealed clear differences and similarities between the various pigments. The resulting data expect to serve as a useful foundation research for future studying of the pigments used by the Joseon royal court in the late nineteenth century.

• The Journal of Internal Korean Medicine
• /
• v.30 no.2
• /
• pp.410-421
• /
• 2009

Objective : The aim of this study is to investigate the preventive effect of Injinchunggan-tang (YJCGT) & Injinysaryung-san (YJSRS) on MCD-diet-induced NASH in A/J mice. Methods : A/J mice were divided into 4 groups: Normal group (normal diet without any treatment). Control group (MCD diet only), YJCGT group (MCD diet with YJCGT), and YJSRS group (MCD diet with YJSRS). After 5 weeks, body weight, liver weight, biochemical parameters for liver function test, histological changes, and real-time PCR were assessed. Results : Mice lost body weight with the MCD diet and the YJCGT and YJSRS groups lost less than the control group, though showed no statistical significance. Liver weights were decreased by the MCD diet, but not significantly. In the liver function test, all the values were increased with the MCD diet, though some did not show significance. Alp and ALT levels were significantly less increased by YJCGT compared to the normal (p<0.05). All values were decreased or increased compared to the control by treatment though showed no significance possibly due to insufficient sample numbers. In histological findings of the livers. MCD-diet induced severe fatty change and collagen accumulation in the livers, but this fatty change was reduced in the YJCGT and YJYRS groups and fibrogenesis was inhibited significantly with p<0.05 and p<0.01, respectively. In real-time PCR analysis, YJCGT and YJYRS showed inhibitory effect on liver fibrogenesis by reducing associated gene expressions caused by MCD diet. Conclusion : YJCGT and YJSRS are considered to be possible candidates for the treatment of patients with NASH and/or liver fibrosis.