• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1999.11a
• /
• pp.379-382
• /
• 1999

본 논문에서는 촉각의 효과적인 제시를 위한 하나의 보조수단으로 진동의 제시를 상정하고, 이를 위한 사전작업으로 진동에 따른 촉감의 변화를 파악하고자 하였다. 이를 위하여 진동 제시 장치를 제작하였고, 진동에 의한 촉감의 효율적인 평가를 위하여 손가락을 제외한 다른 경로로의 진동 전달 및 소음 전달을 차단하고자 하였다. 또한, 진동과 관련된 물리량으로 주파수와 진폭을 결정하였으며 이를 정량화 하였다. 본 연구의 목적이 진동에 의한 촉감의 미세조정과 관련된 것임을 고려하여 주관 평가 시 진동의 제시는 각 주파수별로 진동에 의한 촉감의 변화가 발생하는 기준 진폭으로 하였다. 주관 평과 결과, 주파수가 증가할수록 더 매끄럽게 느끼며 그 감각이 분명해 짐을 확인할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.69-74
• /
• 1998

차량에서 인체가 노출되는 진동환경으로서 좌석과 바닥에서의 진동사이에 위상차가 존재하는 경우에 대한 인체의 반응을 주관평가 실험을 통해 분석하였다. 인체가 진동에 민감하게 반응할 뿐만 아니라 인체와 좌석으로 구성되는 진동시스템의 공진주파수와 관련된 2.5, 3.15, 4, 5, 6.3 Hz의 주파수에서, 진동의 크기를 각각 0.25, 0.4, 0.63, 1.0, 1.6m/s$^{2}$로 변화시켜 가며 위상차가 인체의 안락성에 어떻게 영향을 미치는 지를 분석하였다. 두 진동간의 위상차는 진동량이 적을수록, 또 주파수가 낮을수록 인체의 안락성에 악영향을 미쳤다. 진동의 진폭이 0.25m/s$^{2}$ 일 때 위상차가 180.deg.인 경우의 불편함은 0.deg.인 경우보다 2.5배 정도 큰 것으로 나타났다. 특히 현가장치가 장착된 의자의 경우에는 좌석과 바닥진동의 위상차이가 안락성에 미치는 영향을 정량적으로 파악하여 인체-좌석 시스템의 공진주파수를 선정해야 함을 알 수 있다.

• 대한공업교육학회지
• /
• v.32 no.2
• /
• pp.171-187
• /
• 2007

The purpose of this study is to measure the lathe tool vibration and verify its usefulness using the fiber optic interferometeric sensor instead of using common accelerometer. To compare two vibration signals a Fabry-Perot fiber optic sensor(FOS) is directly attached to the left-side surface of the lathe tool and an accelerometer is attached near to the fiber optic sensor. Measurement signals from the FOS and theoretical results of receptance simulation are compared. When the amplitude of tool vibration increased the frequency shift phenomena was occurred. This means that mass effect occurred and vibration spectrum moved to the low frequency region. Generally this results is agreement to the regenerative chatter. The chatter frequency is not same as the natural frequency of the tool itself. The FOS can also applied to laboratory experiments for students. This experimental technique is perhaps the first attempts because of directly attachment technique. Therefore, suggested Fabry-Perot fiber optic sensor can be used to monitoring the tool wear and vibration.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.551-554
• /
• 2007

본 연구의 목적은 현재 지반지진공학에서 가장 큰 문제점 중 하나로 대두한 동하중의 주파수에 비례하는 흙의 거동이 지반진동에 미치는 영향을 규명 하는데 있다. 이를 위해 주파수의 영향을 고려하여 지반거동을 모사할 수 있는 지반진동해석 프로그램을 제시하고자 한다. 이 프로그램은 주파수에 비례하는 흙의 전단탄성계수 및 감쇠비를 모두 고려할 수 있는 새로운 해석기법이 될 것이다. 이를 이용하여 주파수에 비례하는 흙의 거동이 지반진동에 미치는 영향을 심도 있게 연구하고자 한다.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.130-137
• /
• 2021

The characteristics of forced vibration by an external excitation force having a frequency were analyzed according to the amplitude and frequency of the excitation force. To obtain displacement, velocity, and acceleration, numerical analysis was performed to obtain the frequency response, and in particular, each FRF(Frequency Response Function) was analyzed to reveal the location of the system natural frequency and excitation frequency in the frequency domain. In the vibration model caused by external excitation, the natural frequency and distribution of the surrounding excitation mode in displacement, velocity and acceleration FRF. The FRF was also shown in the power spectrum and FRF of real and imaginary parts. The external excitation force was approximated with the excitation force of a sine wave by giving the amplitude and frequency, the mode generated by this excitation force could be distinguished. After numerical analysis by changing the equivalent mass, damping and stiffness, the forced vibration response characteristics by external excitation force were systematically analyzed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.2
• /
• pp.125-131
• /
• 2003

In this paper Power Flow Finite Element Method(PFFEM) has been implemented to analyze the vibration of a plate in mid and high frequency ranges. In order to solve the vibration energy governing equation in Power Flow Analysis(PFA), The Finite Element Method(FEM) was used as a numerical tool. It allowed one to predict the distribution of displacement and Intensity in the plate vibrating at mid and high frequencies. The results were compared with the analytical solutions and the approximate FEM solutions. The comparison showed that PFFEM can be an effective tool to analyze the structural vibration in mid and high frequency ranges.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.276-283
• /
• 2018

The purpose of the study is to identify a sound generating organ that has a major influence on the central frequency of the cicadas with the Helmholtz resonator structure for the first time. The sound of cicadas Cryptotympana atrata and Hyalessa fuscata were recorded and analyzed, then the motion of the tymbals was analyzed with a high-speed camera to compare the relationship between the frequency of sound and the motion of the tymbals. As a result, there was little difference in the frequency distribution of calling song and scream for two species. The tymbals of C. atrata oscillated in three vibration modes, while those of H. fuscata oscillated in one mode. There was no difference in the frequency of both tymbals of both cicadas, and three vibration modes of C. atrata generated sound with different frequency bands. The frequency band of tymbals and the central frequency band of calling song were very similar. In conclusion, it is presumed that the frequency of the cicadas with the Helmholtz resonator structure was determined by mode frequency of the tymbals than resonance condition of the abdomen.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.306-311
• /
• 2000

This paper deals with the development of Laser Doppler Vibrometer (LDV) that can mea~ure the tlequency and amphlude of the ultrasonic vibralion. Hc-Ne laser (632.8 om) is used as a light source, and Michelson interferometer in winch frequency of the objective beam is shIfted by Bragg cell IS adopted The frequency modulated signal centered at 40 MHz flom the PIN diode IS amplified. down-col1vel1ed to 2.5 MHz, filtered and digiLized. The voltage output that is proportional to the velocity of the vibratwg surface is obtawed using digItal PLL. A microprocessor is used to extract the frequcncy aud amplitude of the vibratIOn from the voltage output. It is found that the developed LDV can measure up to 300 kHz vibratIOn and the mlillmUITI measurable amplitude is I nm at 300 kHz. We believe thatlhis LDV can be used to measure the vibratIOn of the heavy electric maclllnery and micro-size structures. tures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.168-168
• /
• 2004

본 논문은 헤테로다인 간섭계를 이용한 레이저 진동 측정기에 대해 기술하고 있다. 상용 레이저 진동 측정기가 대부분 AOM을 이용하여 주파수 천이를 일으키는 반면, 본 연구에서는 Zeeman 안정화 He-Ne 레이저를 사용하므로써, 서로 다른 주파수를 가지는 레이저를 동시에 얻을 수 있었다. 따라서, Zeeman 안정화 He-Ne 레이저를 사용하는 진동측정기의 경우 간섭계 구성을 위해 사용되는 비용을 현저히 줄일 수 있다. 또한, AOM의 고주파 신호를 처리하기 위해서는 RE 대역의 신호처리 회로 설계가 필요하지만, Zeeman 안정화 레이저의 주파수 천이가 낮으므로, 제안된 진동측정기의 신호처리가 용이하다.(중략)

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.341-347
• /
• 1996

Vibration analysis is one of the most powerful tools available for the detection and isolation of incipient faults in mechanical systems. The methods of vibration analysis in use today and under continuous study are broad band vibration monitoring, time domain analysis, and frequency domain analysis. In recent years, great interest has been generated concerning the use of time- frequency repesentation and its application for a machinery diagnostics and condition monitoring system. The objective of the study described in this paper was to develop a new diagnostic tool for the rotating machinery. This paper introduces a new time frequency representation. Directional Winger-Ville Distribution, which analyese the time-frequency structure of the rotating machinery vibration.