• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.632-635
• /
• 1996

조성 변조된 비정질 Fe80Zr20박막의 자기적 성질과 기계적 성질 변화를 전해적 방법에 의한 수소 취입 시간의 함수로 측정하여, 그 상관 관계를 연구하였다. 박막의 Young's modulus는 진동 cantilever 시료의 공명 주파수를 , 10-4nm의 측정 감도를 지닌 laser heterodyne interferometer를 써서 측정하였다. 농도 2N의 인산 전해액에 침적된 시료에 26.3mA/$\textrm{cm}^2$의 전류를 흘려 이루어진 수소취입에 의해, Fe80Zr20 박막의 포화자화 정도는 8배, Young's modulus는 18배 가량 증가하였다. Fe80Zr20박막의 자기적 성질의 변화가 원자적 scale의 미세 구조 변화에 의한 것이라는 간접적인 증거를 제공하였으며, cantilever 시료의 공명주파수 측정을 통하여 박막재료의 기계적 성질을 연구할 수 있는 새로운 가능성을 제시하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.7
• /
• pp.671-676
• /
• 2016

This study is about design for the Rotational Instrument of the Industry factory which is used management safety and maintenance. We developed the multichannel vibration monitering system of the self-diagnosis for middle level CMS(Condition Monitoring System) market, and that system are new features to the expandability and flexibility. Normally one channel is used for treating one signal, but developed instrument can treat four channel with one signal processing card. One rack have redundant power supply and displace and it can check vibration measurement value in field without computer. Bearing fault detection is fundamental of vibration surveillance, but sometimes can not check with vibration velocity and acceleration. So it need the filtering and the amplitude modulation on the acceleration enveloping technology when irregular vibration is happened. We developed the vibration analysis instrument which is applied such technology. And the development prototype shows activated within the vibration error limit.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.4 s.109
• /
• pp.404-413
• /
• 2006

Induction motors are the workhorse of our industry because of their versatility and robustness. The diagnosis of mechanical load and power transmission system failures is usually carried out through mechanical signals such as vibration signatures, acoustic emissions, motor speed envelope. The motor faults including mechanical rotor imbalances, broken rotor bar, bearing failure and eccentricities problems are reflected in electric, electromagnetic and mechanical quantities. The recent research has been directed toward electrical monitoring of the motor with emphasis on inspecting the stator current of the motor, The stator current spectrum has been widely used for fault detection in induction motor systems. The motor current signature analysis is the useful technique to assess machine electrical condition. This paper describes the motor condition detected by the current signatures Paralleled with vibration signatures analysis of induction motors with the roller bearing and the journal bearing type for large vertical pumps in power plant as examples to discuss for motor fault detection and diagnosis.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.4
• /
• pp.237-243
• /
• 1995

We have studied methods of detecting attenuation of solid materials such as silicon wafer and piezoelectric $LiTaO_3$ by means of optical probing techniques. We have performed measurements of surface acoustic waves(SAW) generated from 90 degree wedge type transducer and also from inter-digital transducers(IDT). SAW of 20.0 MHz was generated on a silicon wafer from the 90 degree wedge type transducer and those of 20.8 and 14.5 MHz are generated on a $LiTaO_3$ from the IDT. Then any surface-corrugation resulted from the above SAW was investigated by He-Ne laser beams. We projected laser beams, which were modulated by an optical chopper, on the SAW of the same frequency and then measured the scattered beam by the lock-in amplifier. We modulated and synchronized both SAW and the incident laser beam as well as the phase sensitive detector(PSD) to the same frequency in order to simplify our measurement system. We obtained the attenuation coefficients of SAW to be $0.62{\sim}0.75dB/mm$(from IDT1, 20.8 MHz), and $0.60{\sim}0.72dB/mm$(from IDT2, 14.5 MHz), $0.83{\sim}1.28dB/mm$(from the wedge type), respectively.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.461-466
• /
• 2012

This paper describes the development and test result of X-band Transmitter flight model(FM) of STSAT-3 by satellite research center(SaTReC), KAIST. The communication sub-system of STSAT-3 is consist of two different frequency band channels. S-band frequency is used for Telemetry & Command, and X-band frequency is used for mission data. Payload observations data in Mass Memory Unit (MMU) is modulated by QPSK modulator in X-band Transmitter, and then QPSK modulation signal is transmitted to antenna through transfer switch. In this Paper, we described the results of modulation, low-pass filter design, power amp development, and switch test. The FM XTU is delivered Spacecraft Assembly, Integration and Test(AIT) level through the completion of functional Test and environmental(vibration, thermal vacuum) Test successfully.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.139-143
• /
• 1996

We report on the static and dynamic characteristics of optically modulated resonant tunneling diode oscillator (RTDO) formed in double-barrier quantum-well structure. Under the illumination of Ti:Sapphire laser, the dc current-voltage (I-V) curves of RTDO shifted towared lower voltages. This characteristic was found to odify the series resistance, negtive differential resistance, capacitance, and the inductance of the RTDO. As a result, the resonant frequency of TRDO centered at 5.302 GHz was found to decrease about 20 MHz under the laser illumination. At a constnat bias voltage, the oscillation frequency decreased linearly as the laser power was increased.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.376-381
• /
• 2013

위상잠금 열화상에서는 일반적으로 변조된 주파수의 광램프를 쓰고 있다. 하지만 램프의 광도 분포는 입력신호가 평단(flat)특성임에 불구하고 심지어 불균일하여 검사 시편내에 측면 열유동을 만들어낸다. 이러한 열유동은 원치 않는 효과로서 측면의 분해능을 감소시키는 등과 같이 관심 결함구조의 영상에 부정적인 영향을 미친다. 본 고에서 검토되는 방식은 열원으로서 LCD 프로젝터와 같은 것을 이용하여 각 가진픽셀에 개별적으로 진동진폭, 광도 오프셋, 위상지연 등을 할당하는 방법에 대한 접근기술이다. 이러한 반복적인 자체학습 과정에 의한 조명 패턴을 통하여 측면 열유동이 제거되고 분해능이 향상되도록 제공하는 것이다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.8 s.101
• /
• pp.897-903
• /
• 2005

When driving on uniformly tining concrete pavement road, the whine noise which has high spectrum at the specific frequency related to the uniform tining space exist. In this paper, a randomization method of tining space for concrete pavements is proposed to reduce the whine noise. The proposed method is developed based on the LCG(linear congruential generator) algorithm. The design parameters used in the method are number of different tining space, ratio of each tining space, total linings of each size. sequence of actual tining under given constant drag length and texture. Monte Carlo simulations are used to validate the proposed method.

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.357-362
• /
• 1996

The magnetic levitation system has great advantages, such as little friction, no lubrication, no noise and so on. But the magnetic levitation system need a stabilizing controller because it is a unstable, system in natural and it need a sensor for displacement measurement to control the system. In this paper, we proposed a sensorless method to measure the gap between the magnetic pole and the levitated object with application the inductance characteristic which vary according to gap. We made a driving circuit which supply simultaneously the control input PWM(Pulse Width Modulation) signal and the carrier PWM signal to estimate the gap. Because the inductance is a function of gap, and the current of the carrier signal is a function of the inductance, we could estimate the gap from the measurement of the current of the carrier signal. Finally, we investigated the validity of the proposed method through the experimental results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.33-36
• /
• 2007

Acoustic holography exhibits the spatial distribution of sound pressure in time or frequency domain. The obtained picture often contains far more than what we need in practice. For example, when we need to know only the locations and overall propagation pattern of sound sources, a method to show only what we need has to be introduced. One way of obtaining the necessary information is to use envelope in space. The spatial envelope is a spatially slowly-varying amplitude of acoustic waves which contains the information of sources' location. A spatial modulation method has been theoretically developed to get a spatial envelope. By applying the spatial envelope, not only the necessary information is obtained but also computation time is reduced during the process of holography. The spatial envelope is verified as an effective visualization scheme in time domain by being applied to complicated sound fields.