• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.689-693
• /
• 1997

This paper deals wth the impact and the transient analysis of the impact absorbing system consist of double damping. piston and sprlng system in spreader to increaas efficlcncy of it. It shows the optimum damping coefficient and spring constant under the limited stroku of Impact absorbing system using for crane spreader and the optimum condition of impact absorbing system causing certain reaction force as time. which is characteristic of dashpot and rubber. This system absorbed 11.5 and 88.5 % impact energq at the spring and the damper respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.160-171
• /
• 1999

The paper examines the ride performance enhancement that can be obtained by applying hydraulic semiactive vibration absorbers(SAVa) to alter the compliance characteristics of the seat/wheel suspension system. The work relies on a consistent model of the (nonlinear) hydrodynamics of the SAVA. A recently developed Lyapunov control scheme is used to provide regulation.. The performance is first examined assuming a quarter car with a seat/seat mounted mass. The paper then employs a quarter car/seat with a two mass ISO model of the seated human . The simulated results indicated that a reduction of 45% of the peak vertical acceleration is achievable with new system.

• Journal of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.520-526
• /
• 1987

A new series of $dioxo-di-\mu-oxo-dimolybdate(V)$, has been prepared by reaction of pyridinum oxoisothiocyantomolybdate (V) with iminodiacetic acid derivatives containing amine carboxyl groups. The properties and possible molecular structure of these complexes were discussed by elemental analysis, spectroscopic studies and magnetic susceptibility measurements. The infrared spectra of these complexes all show two strong $Mo=O_t$ stretching bands in the 900∼$980cm^{-1}$, $MoO_2Mo$ very prominent strectching bands at around 410~425 and 735~$750cm^{-1}$ to symmetrical and asymmetrical O-bridge stretching, a coordinated $coo^-$ asymmetrical band in the 1585∼$1,640cm^{-1}$. Also, d-d transition of molybdenyl complexes corresponding to $^2B_2{\to}^2B_1$ occured in the 24,800~$28,000cm^{-1}$ region, charge transfer transition corresponding to ligand-to-molybdenum in the 32,500~33,800, 42,000~$47,500cm^{-1}$ region. The complexes synthesized were yellow or orange and diamagnetic.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.360-366
• /
• 1985

본 연구에서는 주구조물의 진동이 관심있는 주파수 범위내에서 1 자유도계로 근사화될 수 있는 경우, 임의로 선택된 점탄성재료에 대하여 최적튜닝 및 최적댐핑효 과를 얻을 수 있도록 그 형상을 설계하고, 예비변형율을 조절하는 절차를 제시하고, 제안된 방법론을 외팔보와 집중하중으로 구성되는 1 자유도계 및 선반의 공구대에 적 용하여 공진감쇠 및 채터억제효과를 살펴 보았다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.5
• /
• pp.949-958
• /
• 2020

The functions of shock absorbers are to dampen body, suspend motions, dissipate impact energy, and control tire force variation. During the operation, hydraulic oil is passed between the chambers via a flow restrictions. Therefore the damping force characteristics of shock absorber is determined by the characteristics of orifices and flow restrictions. The uncertainty in design variable affects the performance of suspension system strongly. But, the researches about the influence of uncertainty in design variable such as a fluid restriction's property of shock absorber, on the suspension system performance was hardly ever proposed. In this paper, we used statistical method of Latin Hypercube sampling, and the effects of design variables uncertainty on the performance of suspension system was presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.861-868
• /
• 2017

In this study, a novel magnetic field generator, using a shielding effect for controlling the dynamic stiffness and damping of magnetorheological gels, is proposed. A magnetorheological gel is a smart material that can alter its stiffness and damping, and it can be used as a vibration absorber and in vehicle suspension. It is necessary to control the magnetic field to use magnetorheological gels in various applications. There are two types of magnet field generators, namely the electromagnet and permanent magnet, and the electromagnet is generally used in practical applications. However, owing to its limitations, the electromagnet is not suitable for long-term use. Therefore, in this paper, a novel magnetic field generator is proposed to address such problems for use in real applications.

• Journal of KSNVE
• /
• v.14 no.2
• /
• pp.26-34
• /
• 2004

현재 철도는 기술의 발전과 함께 초고속 대량수송, 정시성, 안전성, 에너지효율성 및 친환경성 등의 장점을 가지는 새로운 교통수단으로 재조명되고 있다. 국내에서도 고속철도 개통과 G7고속열차의 개발 등으로 철도기술은 제 2의 도약기에 들어서고 있으며, 특히 도로교통망의 포화로 인해 철도건설수요가 계속적으로 증가할 것으로 기대되는데, 기존 수송량의 흡수 및 장기적인 관점에서 철도교통망의 확장을 도모하기 위해서는 열차의 중량화와 고속화가 제반기술의 발전과 함께 지속적으로 추진될 것으로 판단된다. 그러나 이러한 차량의 중량화와 고속화는 실질적으로 선로 주변에 발생되는 소음 및 진동의 크기를 증가시키게 되는데, 최근 들어 소음 및 진동관련 환경기준의 강화와 민원의 증가 등으로 인해 친환경적인 측면에서 적극적인 소음 진동 저감대책의 수립과 관련 기술의 적용이 요구되고 있는 상황이다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.269-275
• /
• 2001

정밀가공기계 및 소음발생원의 방진재료로서 사용될 수 있는 재료는 우선 내부 및 외부진동의 흡수성과 감쇠성이 뛰어나야 하고, 시간 및 온도변화에 따라 형상 및 치수 정밀도가 안정되어야 하며, 불규칙한 외력과 운동전달기구의 변동 하중 하에서도 높은 정적, 동적 강성을 유지해야 한다. 본 연구에서 개발한 재료인 Ferrite-Resin 복합재료는 Resin-Concrete에 미세한 산화철을 filler 재료로 사용함으로써 주철 및 강의 구조재료가 갖는 강성과 비중의 값에 접근시킬 수이었다. 일반적으로 불포화 폴리에스테르 수지나 에폭시계 수지는 glass 전위점의 근처에서 진동에너지의 흡수가 큰 영역이 존재하며 이는 10 .mu.m 이내의 미세한 filler재료가 포함되었을 경우에도 그 종류에 관계없이 큰 변화가 없는 성질이다. 시험편을 통한 재료실험을 통하여 개발된 복합재료를 모델 구조물에 적용시킴으로서 그 적용성을 검토하였다. 앞으로의 수지와 Ferrite 함유량 및 제조 공정이 적절히 모색되면, 이 방진재료가 정밀기계의 구조재료로서 뿐만 아니라 냉동기, 소형선박의 기관실, 가전제품 및 기어박스 등의 케이싱 재료로 사용되는 방진재료로서 그 응용이 확대될 수 있을 것으로 본다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.3 s.55
• /
• pp.53-62
• /
• 2007

This paper presents a new vibration control method for long-span bridges using complex damper system. The new system presents simple mechanical configuration with oil and elasto-plastic dampers which have velocity and displacement dependency in vibration energy absorbing. This system can produce various damping forces according to the applied external forces by the velocity and displacement-dependent characteristics of the dampers. The oil damper dissipates vibration energy for relatively frequent and small amplitude like in the case for small to moderate earthquakes, whereas the elasto-plastic damper system works for rare and large amplitude vibration such as high seismic excitation. Thus, the proposed system exhibits the advantage of low cost with high performance since the roles of the two different dampers are effectively separated. A numerical model is established for the complex damper system, and the response characteristics and effectiveness of the proposed system are presented through numerical simulations. Numerical results show that the proposed complex damper system can significantly improve the seismic performance of long-span bridge structures with much more effective damping mechanism than single conventional passive damper systems.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.90-96
• /
• 1989

A new series of $dioxo-di-{\mu}-oxo-dimolybdate(V)(*image)$, has been prepared by the reaction of pyridinum oxoisothiocyanato-molybdate(V) with 1, 6-diaminohexane-N, N, N', N'-tetraacetic acid derivatives containing amine carboxyl groups. The properties and possible molecular structure of these complexes were discussed by elemental analysis, spectroscopic studies and magnetic susceptibility measurements. The infrared spectra of these complexes show two strong Mo=$O_t$ stretching modes in the $900-965cm^{-1}$, MoO$_2$Mo stretching bands at around 450∼500 and $740-765 cm^{-1}$ to symmetrical and asymmetrical O-bridge stretching, a coordinated $COO^-$ asymmetrical band in the $1600-1635 cm^{-1}$. The complexes synthesized were yellow or orange and diamagnetic.