• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.78-82
• /
• 2006

Recently, The demands for the reduction of noise generated by transformers have been increasing. Almost all of the noise generated by transformers is a result of magnetostricitive vibration in the core. The noise radiates into the atmosphere from the tank through the insulation oil. As the noise of transformer irritates residents, needs for decreasing the noise of transformer have been arised. One method of reduction such a noise is to build a free-standing enclosure of concrete and steel plates around the transformer. However, this method has some disadvantages. Another method of noise reduction is to mount a close-fitting sound insulation panel on the side of a transformer tank. Side plate vibrations of transformer are transmitted to such a sound insulation panel along two paths. In one case, they are transmitted through air by sound pressure and in the other through supporting structures. In the paper, the vibration and noise effect which is transferred from reinforce channel to insulation panel generated by transformer have been identified for the several kinds of insulation panel and damping sheet analytically and experimetally.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.334-334
• /
• 2010

반도체 소자 제조 공정에 사용되는 공정 펌프는 전체 소요되는 에너지(소비전력)에 52%를 소비하고 있다. 이러한 이유 때문에 반도체 fab 내에서 에너지 절감을 논의할 때 항상 공정용 진공 펌프가 1 순위에 오를 수밖에 없는 것이다. 반도체 공정용 진공 펌프는 사용되어지는 공정에 따라 유지되는 진공도가 달라지고 이에 따라 소비전력과 투입되는 utility의 양이 바뀌게 되어 진공도와 공정에 따른 에너지 소비의 pattern이 다르다. 한국표준과학연구원 진공센터에서는 각 공정 대응용 펌프의 종류에 따라 배기속도, 도달진공도, 소비전력, 진동, 소음 등 기본 펌프 성능 평가, light gas인 helium에 대응하는 기본 성능평가를 실시하고 있다. 또한 부가적으로 soft/medium 공정용의 경우 저전력 mode의 소비전력의 진공도에 따르는 측정변수의 pattern을 측정/분석하고 있으며, harsh 공정용의 경우 50~300 slm의 유량 주입에 따른 내구성 특성을 monitoring하고 있다. 드라이펌프의 기본적인 평가 성능과 각 회사의 SPM (single pump monitoring system) 측정 변수인 온도, 배기구 압력 변화 등의 자체 진단 인자를 포함하여 반도체 공정에서 드라이 펌프의 운용에 필요한 냉각수, $N_2$, 등과 같은 utility의 사용량 및 온도변화 등을 측정하여 드라이 펌프의 에너지 소비 pattern을 분석하고자 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.113-113
• /
• 2013

최근 반도체 산업의 급속한 발전과 더불어 핵심기술로 부각되고 있는 진공 기술은 다양한 응용목적을 위한 진공시스템 설계와 운영을 필요로 한다. 이는 진공에 대한 기초지식과 이해가 요구되며, 설계제작 및 운영은 많은 시간과 큰 비용이 요구된다. 따라서 응용 진공시스템 제작에는 구성에 따른 시스템 진공특성을 예측하는 것이 중요하며 목적에 부합한 진공펌프를 선택하고 운영하여 최소비용으로 시스템 활용효율성을 극대화할 수 있는 설계를 해야 한다. 현재 반도체 및 디스플레이 공정의 저전력, 대유량화 추세에 따라 최대 3,000 m3/h급의 드라이펌프가 여러 공정에서 적용되고 있는 추세이다. 이에 대응한 고유량 영역의 드라이펌프 부하 내구성 대응 요구에 부응하는 객관적 내구성평가의 정립 및 표준 측정 시험평가 방법의 필요성이 점차 대두되고 있는 경향에 있다. 이러한 현실적인 요구 조건에 필요한 기본적인 평가로 압력대별 드라이펌프의 적응능력을 실시간 측정하였다. 실험 조건으로는 각 드라이펌프 용량별 N2 가스를 1 시간에서 3 시간동안 1 mbar에서 최대 300 mbar까지 연속적인 부하 조건에서의 유량, 진동, 소음, 소비전력 등을 실시간으로 측정하였다. 이에 부응하는 평가장치 구축 및 시험분석은 한국표준과학연구원 진공펌프 평가실험실에서 수행되었다.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.93-99
• /
• 2008

The SeoulMerto, operating subway line No.$1{\sim}4$, was constructed in the metropolitan Seoul with the highest population. When it was built, the design was challenged to sharp curved tracks considering the protection of buildings, cultural assets, the connection to ground roads and rivers as well as to elevated railway in some parts. Lots of residential apartments and business complex have gradually increased in the area around subway stations and railway lines according to the urban development. Consequently, Requirements of better quality of life and comfortable environment caused the citizen complain for the noise. It has become one of serious social issues. In this paper, Noise level was analyzed using noise map measured in the running train of all routes. The analysis on the noise level was conducted according to railway type, track components type, seasonal type, retirement degree of the vehicle and subway station. Especially, Noise characteristics were analyzed by noise level data measured in the inside and outside of the train with geometry types of the concrete track. This study will contribute fundamental data for the "The Development of Sound-Absorbing Block on Concrete Track" promoted on The National R&D Project.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1454-1462
• /
• 2008

This paper is focused on the analysis of the noise and vibration measured near the wheelset of the high-speed trains using a time-varying frequency transform as a preliminary research of running monitoring. Due to the non-stationary characteristics, it is necessary to examine noise and vibration of the train with time-varying frequency transforms. In this paper, the short-time Fourier transform method is utilized - the stored data is localized by modulating with a window function, and Fourier transform is taken to each localized data. For the examination, the non-stationary noise and vibration of the high-speed train's wheelset are measured by using some microphones and accelerometers, and those signals are stored in a on-board data acquisition system. The non-stationary random signal analyses with the short-time Fourier transform are performed, and the result are classified as follows; auto-spectral density, cross-spectral density, frequency response, and coherence functions. From those functions, it is possible to observe the frequency characteristics of sleepers, switchers, tunnels, and steel bridges. Also, some distinct peaks, which are not dependent upon the train's speed, are identified from the results.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.119-127
• /
• 2005

Material characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the material test and accelerated heat aging test were carried out to predict the useful life of NBR and EPDM rubber mount for a compression motor which is used in a refrigerator. In order to investigate the effects of heat-aging on the material properties, crosslink density, modulus at 100% strain, stress-strain curves were obtained from uniaxial and equi-biaxial tensile tests. The change of compression set were used for assessment of the useful life and the time to threshold value were plotted against the reciprocal of absolute temperature to give the Arrhenius plot. The useful life at variable temperatures are obtained in the Arrhenius relationship.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.255-260
• /
• 2021

The importance of electric vehicles is gradually increasing due to the recent depletion of fossil fuels. In order to use an electric vehicle, the battery built into the vehicle must be frequently charged. Electric vehicles has very good performance in terms of noise and vibration. However, due to the limitations of the battery, the mileage is considerably shorter than that of an internal combustion engine vehicle once it is charged, and the battery charging time is relatively long compared to the refueling time. There are two types of charging methods for electric vehicle batteries: plug-in and wireless charging. In this paper, we introduced the wireless charging technology for electric vehicles and the current state of technology development and standards in major countries.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.33-41
• /
• 2019

This study presents the development of a lifetime test bench for the strain wave reducer which is a precision gear reducer of the robot to realize fault diagnosis and failure prognostics. To this end, the lifetime test bench was designed to detect the vertical forward/reverse direction rotation load. Through the lifetime test bench, it is possible to apply the same load spectrum from robot working scenarios. We developed a data integration gateway for fault data collection. Through the development of dedicated software for fault diagnosis and failure prognostics, these data from vibration, noise and temperature sensors were collected and analyzed along with the operation of the lifetime evaluation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.69-75
• /
• 2019

In recent years, the driving performance and exhaust sound quality in automobiles have been recognized as important factors, as they maximize the driving fun to fulfil the demands of customers. Therefore, many automobile manufacturers are studying various exhaust pipe shapes to improve sound quality and optimize exhaust pressure. The objective of the exhaust pipe design is to maximize the engine efficiency using optimal exhaust pressure settings. In this study, an exhaust system was fabricated with different junction shapes, and the results were analyzed through various experiments. The exhaust gas pressure acting inside the exhaust pipe was measured using a pressure transducer. Meanwhile, the vibration generated in the vehicle was measured in three axial directions and analyzed. The ground noise generated in the indoor and outdoor of the vehicle was measured, and the noise generated at the maximum output was measured and analyzed.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.224-229
• /
• 2019

Seat of automobile is required to support the comfort to driver and passenger during the driving. The control method of the seat position is changed from manual type to power type, which means using the motor to increase the comfort of the driver. By using the motor, several problems, such as vibration, noise, and over-current, appeared. These problems can be reduced through the control of seat motor. In this study, a control technology of four control variables, which determine profile of the input voltage applying to the seat motor, is proposed to generate the current profile having soft-start and soft-stop. The current flowing through the coil by input voltage is described by mathematical modeling of power seat. It is confirmed that optimized current profile having soft-start and soft-stop can be generated from simulation using the mathematical model.