• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.153-160
• /
• 2020

This study was conducted out to investigate the effect of harvest time of the day, precooling or not, and temperature of precooling and storage on the marketability in strawberries 'Maehyang' for export in May. Strawberry colored with 60±5% of the skin was harvested at 07:00 am or 15:00 pm, respectively. After harvesting, some strawberries were precooled to 0, 2, 4℃ for 3 hours in the cold store, respectively, and the others were kept at room temperature. And then, strawberries were stored at low temperature in the cold store set at 4, 8 or 10℃ storage temperatures. The weight loss rate, firmness, soluble solids content, color, incidence of gray mold of strawberries were measured at two days intervals during storage for 14 days. Both 07:00 am and 15:00 pm harvest, fruits as the storage periods lapses increased weight loss rate compared to the weight at harvest time of the day, and the difference in the weight loss rate of fruits depending on the treatment was greater at 15:00 pm harvest than at 07:00 am. Firmness tended to increase again after 8th day at 07:00 am or 15:00 pm harvest, respectively. In the afternoon harvest, 10℃ storage without precooling showed the lowest fruit firmness on the 2nd day after storage. The soluble solids content at 07:00 am or 15:00 pm harvest tended to be maintained at high value with precooled and stored at low temperature as storage days elapse. The color values were significantly higher at 'L' indicating brightness and lower at 'a', indicating redness at low storage temperature regardless of harvesting time of the day and whether it was precooling or not. The incidence of gray mold was higher at 15:00 pm harvest than at 07:00 am harvest, and it was significantly higher in the treatments stored at 10℃ after precooling similarly. In this study, strawberry 'Maehyang' for export harvested at 07:00 am and stored at 4℃ after precooling at 0℃ maintained the best shelf life, therefore, it is judged that desirable to harvest in the morning with low temperature and to precool and store at low temperature.

• Journal of Yeungnam Medical Science
• /
• v.18 no.2
• /
• pp.239-245
• /
• 2001

Background: Acute idiopathic thrombocytopenic purpura(ITF) is one of the common hematologic disorders in children. Bone marrow aspiration (BMA) is often performed in children with acute ITP to rule out leukemia, aplastic anemia or other hematologic diseases. However, whether BMA is needed in children with typical clinical and hematological features of acute ITP have been questioned. This study was performed to examine the proper indication of BMA in acute childhood ITF. Materials and Methods: The medical records and BMA reports of children with the provisional diagnosis of acute ITP were reviewed from January 1984 to December 2000. Patients were divided into two groups, one with typical and another with atypical clinical and hematological features of acute ITP. Typical acute ITP group was characterized by the history of previous viral infection, well being appearance, no hepatosplenomegaly, no lymphadenopathy, normal Hb, WEC, neutrophil count and peripheral blood smear except thrombocytopenia. A platelet count of $50{\times}l0^9/L$ or lower was the cutoff level. Results: Total 120 children with the provisional diagnosis of acute ITP were included. One hundred eighteen of them were confirmed to have acute ITP by BMAs. Of these, 66 had typical and 54 had atypical features. All of typical features and 52 of 54 with atypical features of acute ITP were confirmed to have acute ITP by BMAs. Two patients with atypical features of acute ITP were diagnosed as aplastic anemia and myelodyspalstic syndrome, respectively, by BMAs. Conclusion: This study concludes that BMA is not needed for the children with typical features of acute ITP but it is needed for the children with atypical features of acute ITP to rule out other hematologic disorders.

• Journal of Yeungnam Medical Science
• /
• v.2 no.1
• /
• pp.11-22
• /
• 1985

Femur neck fracture is well known as one of the major death cause after trauma in elderly patients, and unsolved fracture due to its frequent association with complications such as avascular necrosis and nonunion. Through meticulous evaluation of the patient, hip and surgeon's experiences, reduction of mortality and morbidity as well as rapid recovery of the patient to the preinjury social and ambulatory status without local complications and revision after treatment is urgently needed. Many factors about this fracture In itself were noted, but we have analyzed 18 femur neck fractures of the patients older than 50 years preliminarily according to age, fracture pattern, osteoporosis, etiology and method of treatment with its delay in association with major complications especially avascular necrosis and nonunion. The results are as follows; 1. Of these 18 fractures, 11 were in females, 8 were caused by minor trauma such as slip-down accident and 4 were associated with definite osteoporosis according to the Sing's classification. 2. Fracture pattern of these 18 are undisplaced in 4, displaced subcapital in 11, displaced transcervical in 3. 11 fractures in the patients older than 60 year are composed of 3 undisplaced or impacted fractures and 8 displaced subcapital fractures. 3. These 18 fractures were treated by closed reduction and Internal fixation with multiple pins in 13, and hemiarthroplasty in 4, but one was not treated to die after discharge from hospital. 4. 4 undisplaced or impacted fractures and 3 displaced transcervical fractures were not associated with any complications such as avascular necrosis or nonunion. But 4 of 6 displaced subcapital fractures were complicated by avascular necrosis, 3 of which were reduced in the varus position within 1 week, and the other was reduced in the good position on 1 week after trauma. There was no complication in 2 displaced subcapital fractures reduced in valgus position within 3 days after trauma. According to the above results, the prognosis of the femur neck fracture is dependent upon the fracture pattern and delay in its treatment. So it is inevitable to reduce the fracture in anatomical or valgus position as early as possible. But the arthroplasty may be needed in displaced subcapital fractures delayed for several days, with its reluction in extreme varus position or impossible and with pre-existing disease in the same hip Joint (total hip replacement).

• Progress in Medical Physics
• /
• v.9 no.2
• /
• pp.65-71
• /
• 1998

The aims are to evaluate the effects of an 1.0 cm acrylic plate and SSD on the dose profile and depth dose distribution of 9 MeV electron beam and to analyse adequacy for using an acrylic plate to reduce energy of electron beams. An acrylic plate of 1.0 cm thickness was used to reduce energy of 9 MeV electron beam to 7 MeV. The plate was put on an electron applicator at 65.4 cm distance from x-ray target. The size of the applicator was 10${\times}$l0cm at 100 cm SSD. For 100cm, l05cm and 110cm SSD, depth dose on beam axis and dose profiles at d$\_$max/ on two principal axes were measured using a 3D water phantom. From depth dose distributions, d$\_$max/, d$\_$85/, d$\_$50/ and R$\_$p/, surface dose, and mean energy and peak energy at surface were compared. From dose profiles flatness, penumbra width and actual field size were compared. For comparison, 9 MeV electron beams were measured. Surface dose of 7 MeV electron beams was changed from 85.5% to 82.2% increasing SSD from 100 cm to 110 cm, and except for dose buildup region, depth dose distributions were independent of SSD. Flatness of 7 MeV ranged from 4.7% to 10.4% increasing SSD, comparing 1.4% to 3.5% for 9 MeV. Penumbra width of 7 MeV ranged from 1.52 cm to 3.03 cm, comparing 1.14 cm to 1.63 cm for 9 MeV. Actual field size increased from 10.75 cm to 12.85 cm with SSD, comparing 10.32 cm to 11.46 cm for 9 MeV. Virtual SSD's of 7 and 9 MeV were respectively 49.8 cm and 88.5cm. In using energy reducer in electron therapy, depth dose distribution were independent of SSD except for buildup region as well as open field. In case of using energy reducer, increasing SSD made flatness to deteriorate more severely, penumbra width more wide, field size to increase more rapidly and virtual SSD more short comparing with original electron beam. In conclusion, it is desirable to use no energy reducer for electron beam, especially for long SSD.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.6
• /
• pp.507-516
• /
• 2016

The salinity of soups of institutions enrolled at the Center for Children's Foodservice Management was monitored to reduce sodium intake of children by continuously managing salinity of soups provided by children food service. Monitoring of salinity was conducted by a salinity meter (SB-1500H, HM digital) three times in 2016 by patrolling children's institutions for the instruction of public health. The average salinity of soups provided by total children's institution showed a significant decrease in salinity - $1^{st}$ 0.45%, $2^{nd}$ 0.41% and $3^{rd}$ 0.39% - as monitoring was proceeded (p<0.01). When salinity of soups was analyzed according to the type of children's institution, the salinity of national and public institutions showed no significant decrease. In contrast, the salinity of private institutions decreased significantly (p<0.05). Depending on the enrollment of the food service, there was no significant difference in average salinity of soups between large food services, which have over 50 children, and small food services, which have less than 50 children. However, all food services showed a salinity decrease from the $1^{st}$ monitoring to the $3^{rd}$ monitoring. Salinity according to the type of soup showed that salinity of clear soup, miso soup, and stew except beef soup decreased from the $1^{st}$ monitoring to $3^{rd}$ monitoring. However, there was no significant difference in salinity according to the type of soup which can be attributed to a large difference in salinity among the same type of soup. The individual soup showing the biggest difference between maximum and minimum salinity of soup was egg soup (0.62%), potato soup (0.54%), and mushroom soup (0.64%). The present average salinity of soup provided by children's institutions was less than 0.5% which is the recommended standard of the Ministry of Food and Drug Safety. However, the salinity of soups should be managed within a certain range including the minimum salinity regarding the taste education of children.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.206-214
• /
• 2009

Statement of problem: There are common clinical cases in which the mandibular first and second molars are missing unilaterally. Purpose: This study was designed to compare and evaluate the magnitude and distribution of stress produced by four kinds of mandibular unilateral free-end removable partial dentures that could be applied clinically in Kennedy class II cases. Material and methods: Four unilateral free-end removable partial dentures using clasp, Konus crown, resilient attachment, and flexible resin were fabricated on the photoelastic models of the Kennedy class II cases. The vertical load of 6㎏ was applied on the central fossa of the first molar of every removable partial denture in the stress freezing furnace and the photoelastic models were frozen according to the stress freezing cycle. After these models were sliced mesio-distally to a thickness of 6mm, the photoelastic isochromatic white and black lines of the sliced specimens were examined with the transparent photoelastic experiment device and photographs were taken with a digital camera. The fringe order numbers at eight measuring points in the photograph were measured with the naked eye. Results: The maximum fringe order number of each sliced specimen and the fringe order number at the residual ridge just below the loading point were in the decreasing order of the unilateral removable partial dentures using flexible resin followed by clasp, resilient attachment, and Konus crown. The fringe order number at the root apex of the second premolar was in the decreasing order of the unilateral removable partial dentures using clasp followed by flexible resin, Konus crown, and resilient attachment. Conclusion: The removable partial denture using Konus crown showed the most equalized stress distribution to the supporting alveolar bone of abutment teeth and residual ridge under the vertical loads. The removable partial denture using flexible resin can be applied to the case that has a better state of residual ridge than abutment teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.613-619
• /
• 2001

The aims of this study were to compare the accuracy, sensitivity and specificity of cnventional visual examination, radiography and a new laser fluorescence method, KaVo Diagnodent, for the detection of occlusal caries lesions. One hundred sound human premolars and molars which had no restorations or interproximal cavities were tested by three methods. Tooth lesions depth was assessed at histologic examination using Caries detector dye The following results were obtained. 1. Diagnodent show 7.8 in sound tooth, 25.4 in initial caries, 30.5 in enamel caries, and 53.8 in dentin caries with average score 2. Spearman and Pearson relation coefficient was high between tooth-specimen test with dye and Diagnodent(0.736, 0.619), visual examination(0.664, 0.666), and was low between tooth-specimen test with dye and radiographic examination(P<0.01, total) 3. Accuracy of occlusal caries was highest on Diagnodent(65%) and lowest on radiographic examination(35%) 4. In initial caries, the sensitivity and specificity of Diagnodent method was the highest. In enamel caries, the sensitivity of visual examination was the highest and specificity of Diagnodent method was the highest. In dentinal caries, the sensitivity and specificity of Diagnodent method was the highest and sensitivity of visual examination was the lowest.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.32 no.3
• /
• pp.275-284
• /
• 2012

This study was carried out to determine the harvest management during autumn on the forage production, quality and regrowth of following year of Phragmites communis as native grass. Field experiments were conducted in Ansan and in Cheonan from 2010 to 2011. Forages were cut at 3 cm, 15 cm and 25 cm in height as compared to control (no harvest) in Ansan plots, and forages grown in Cheonan plots were cut at 10 cm and 20 cm in height with control (no harvest). The forages were harvested one time on Oct 7, 2011 in Ansan, and were harvested twice on July 7 and on October 7 in Cheonan. In Ansan, dry matter (DM) yield of control plot the following year were higher than those from harvested plots. In vitro digestible DM (IVDDM) yields, however, were the same: 1,236 kg/ha from control, 1,234 kg from 15 cm cut and 1,241 kg from 25 cm cut plots, except that lower IVDDM yield from 3 cm cut plot than these were observed. Forage quality of control plot was poorer than those of harvested ones. In vitro DM digestibility (IVDMD) and relative feed value (RFV) of control were 39.98% and 65.3, respectively as compared to harvested plots (42.36~46.40% IVDMD and 67.8~72.5 RFV). Yield and quality from Cheonan plots were similar to those from Ansan plots. Annual yield in DM and in CP from control plot were a little higher than those from harvested plots. However, there were no difference found in IVDDM yield between 20 cm cut (5,354 kg/ha) and control (5,178 kg). But IVDDM of 10 cm cut forages was less (4,531 kg). Forage quality scores were better from 20 cm cut, and 10 cm cut plot than control, in order (p<0.05). The quality grades were the 5th and 6th for forages from harvested plots and control plot, respectively. Regrown Phragmites communis from all Cheonan plots ranked the 4th in forage quality. More than 70% of annual yield was observed from the first grown forages. One time harvest per year was desirable for following regrowth and long time stable production of Phragmites communis. We recommended that Phragmites communis be harvested once for more forage yield with higher quality, and that optimum cutting height is 15~20 cm.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.489-496
• /
• 2000

Several culture systems including batch, two-stage CSTR, semi-fed batch, and two-stage cyclic fed-batch were investigated for the efficient production of the Fab fraction of PDC-E2 specific human monoclonal antibody using high cell density recombinant E. coli. A two-phase batch system and a two-stage continuous system were examined to overcome plasmid instability problems, by separating the growth and the production stages. The cell density and productivity of the two-stage continuous culture was better than that of the two-phase batch fermentation. In the two-stage continuous culture system with DO-stat, the cell growth and the productivity were superior to those of the system without the DO control. Also, almost total plasmid stability was maintained in the two-stage continuous culture system. Modified M9 medium was selected as an optimum feeding medium for the fed-batch process, and the optimum C/N ratio determined to be 2:3. The optimum feeding rate was $0.6g/\ell/hr$ for a constant feeding strategy in semi-fed batch system. When the feeding medium was fed by pulsing, it was observed that more frequent pulsing resulted in improved cell growth. The linear feeding method was the most efficient of the various feeding methods tested. Finally, high cell density culture using a two-stage cyclic fed batch system with pH-stat was tried because the linear feeding method showed limitations in terms of obtaining high cell densities, and a cell density of $54 g/\ell$ was achieved. It was concluded that the two-stage cyclic fed batch system was the most efficient system for high cell density culture of the systems tested. However, productivity improvements were lower than expected due to the extremely high accumulations of acetate, although the low levels of residual glucose were maintained.

• KDI Journal of Economic Policy
• /
• v.12 no.2
• /
• pp.135-149
• /
• 1990

Housing owners in Korea have a variety of tax advantages such as income tax exemption for the imputed rent of owner-occupied housing, exemption from the capital gains tax and deduction of the estate tax for one-house households. These tax reliefs for housing owners not only conflict with the principle of horizontal and vertical equity, but also lead to resource misallocation by distorting the housing market, and thus bring about regressive distribution effects. Particularly in the case of Korea with its imperfect capital market, these measures exacerbate the inter-class inequality of housing ownership as well as inequalities in wealth, by causing the affluent to demand needlessly large housing, while the poor and young experience difficulties in purchasing residential properties. Therefore, the Korean tax system must be altered as follows in order to disadvantage owner-occupiers, especially those owners of luxury housing. These alterations will promote housing-ownership, tax burden equity, efficiency of resource allocation, as well as the desirable distribution of income. First, income tax deductions for the rent payments of tenants are recommended. Ideally, the way of recovering the fiscal equivalence between the owner-occupiers and tenants is to levy an income tax on the former's imputed rents, and if necessary to give them tax credits. This, however, would be very difficult from a practical viewpoint, because the general public may perceive the concept of "imputed rent" as cumbersome. Computing the imputed rent also entails administrative costs, rendering quite reasonable, the continued exemption of imputed rent from taxation with the simultaneous deduction in the income tax for tenants. This would further enhance the administrative efficiency of income tax collection by easing assessment of the landlord's income. Second, a capital gains tax should be levied on the one-house household, except with the postponement of payments in the case that the seller purchases higher priced property. Exemption of the capital gains tax for the one-house household favors those who have more expensive housing, providing an incentive to the rich to hold even larger residences, and to the constructors to build more luxurious housing to meet the demand. So it is not desirable to sustain the current one-house household exemption while merely supplementing it with fastidious measures. Rather, the rule must be abolished completely with the concurrent reform of the deduction system and lowering of the tax rate, measures which the author believes will help optimize the capital gains tax incidence. Finally, discontinuation of the housing exemption for the heir is suggested. Consequent increases in the tax burden of the middle class could be mitigated by a reduction in the rate. This applies to the following specific exemptions as well, namely, for farm lands, meadows, woods, business fields-to foster horizontal equity, while denying speculation on land that leads to a loss in allocative efficiency. Moreover, imperfections in the Korean capital market have disallowed the provision of long term credit for housing seekers. Remedying these problems is essential to the promotion of greater housing ownership by the low and middle income classes. It is also certain that a government subsidy be focused on the poorest of the poor who cannot afford even to think of owning a housing.