• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.217.2-217.2
• /
• 2005

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.155-161
• /
• 2006

This paper introduces a new type of mechanical tape feeder for chip mounter. The mechanical feeder is composed of a pneumatic linear actuator and a linear feeding module with the application of a cam-slider. As semiconductor chips are getting smaller, PCB assembly makers require the feeder to position the chip with high accuracy. The linear feeding system improves the positioning accuracy of the chip by getting rid of the index error, which brings into existence on the sprocket rotating feeder. It also can make greatly reduce the dumping rate. The dumping error is caused by the impact occurred as the pawl to interrupt ratchet wheel rotation. The paper discusses its mechanism and mechanical performance. The positioning accuracy and the dynamic characteristic were measured for long time operation and analyzed. As a result, the feeder showed very good performance. However, the feeding system was dynamically unstable due to the cover film eliminator that is required to be modified

• Journal of the KSME
• /
• v.25 no.3
• /
• pp.198-203
• /
• 1985

제동시 균형 문제나 약간 무거운 조향력등의 전륜구동장치을 설계하기 위한 단점들은 Negative 또는 Zero scrub Radius 의 현가장치를 가능케 하는 이론적 기술적 보완 및 해결이 되고 또한 X형 브레이크 파이프 개발로 한 회로 파열에서도 더욱 안정된 제동을 할 수 있게 된다. 따라서 (1) 중. 소형 승용차에서 절대적 비중을 차지하고 있는 실내 유효공간을 훨씬 크게할 수 있는 점 (2) 후륜구동에 비해 손쉽고 갑싸게 4륜 독립 현가장치가 가능하기 때문에 승차감에서 탁월한 개선이 이루어 진다는 점 (3) 우수한 직진(방향) 안정성과 선회성능을 얻을 수 있는 점 (4) 경량화 및 전동(轉動) 손실 감소에 따른 연비 향상 등의 커다란 장점으로 전륜구동차는 기술적인 면에서 후륜구동차에 비하여 그 격을 달리하고 있으며 몇 년 전부터 모든 자동차 회사가 신규 설계 개발중인 차는 전륜구동차로 밝혀지고 있으며 사용자의 전륜구동차에 대한 선호도는 계속 크게 증가할 것으로 보인다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.381-389
• /
• 2012

This paper proposes a method which corrects location data of GPS for navigation of outdoor mobile robot. The method uses a Bayesian filter approach called the particle filter(PF). The method iterates two procedures: prediction and correction. The prediction procedure calculates robot location based on translational and rotational velocity data given by the robot command. It incorporates uncertainty into the predicted robot location by adding uncertainty to translational and rotational velocity command. Using the sensor characteristics of the GPS, the belief that a particle assumes true location of the robot is calculated. The resampling from the particles based on the belief constitutes the correction procedure. Since usual GPS data includes abrupt and random noise, the robot motion command based on the GPS data suffers from sudden and unexpected change, resulting in jerky robot motion. The PF reduces corruption on the GPS data and prevents unexpected location error. The proposed method is used for navigation of a mobile robot in the 2011 Robot Outdoor Navigation Competition, which was held at Gwangju on the 16-th August 2011. The method restricted the robot location error below 0.5m along the navigation of 300m length.