• Composites Research
• /
• v.35 no.3
• /
• pp.139-146
• /
• 2022

In this study, we study fabrication methods suitable for CNT fibers-based composite. We try to fabricate a composite material using a small amount of CNT fiber preparation of woven fabrics or stitched unidirectional fabrics consisting of CNT fiber is not achievable currently. The composite materials on the basis of CNT fibers have been mainly manufactured filament winding method due to productivity issues and difficulties in composite processes. We develop a new method to prepare CNT fibers-based composite using resin infiltrated CNT fibers-based films. Because CNT fibers have numerous nanopores inside, unnecessary resin can remain after curing and decrease the mechanical properties of the composites. To remove the excess resin, pressure should be applied during the process, but the pressure applied through VaRTM was not enough to remove the excess resin. To obtain the composite with high ratio of CNT fibers, higher pressure using hot press machine and foams next to the resin-infiltrated CNT fibers are necessary. We can obtain the composite having a mass ratio of 58.5 wt% based on the new suggested method and diluted epoxy. The specific strength of the composite reach 0.525 N/tex. This study presents a new process method that can be applied to the manufacturing of CNT fiber composite materials in the future.

• Journal of KIISE:Computer Systems and Theory
• /
• v.37 no.4
• /
• pp.205-214
• /
• 2010

BPEL is a standard workflow language, which interacts with Web Services and is used in various applications. But it is difficult to use BPEL for specific applications which require additional functions. In this paper, we present a system which can add new functions to BPEL based on an aspect-oriented programming (AOP) technique. In order to add new functions to BPEL, we define a JWX document format that can describe new functions to apply to BPEL. JWX is XML-oriented document that can code the corresponding Java program in order to dynamically add new functions to BPEL documents. It is possible for BPEL workflow to add new functions without modifying the existing programs using the AOP technique, which guarantees low degree of coupling between key and additional requirements. Additionally this systems weaves based on new functions of Java program and JWX document by expanding BPEL engine called B2J based on AOP and execute them. Therefore it is possible to develop a new BPEL engine with additional functions easily and with low cost. The new system can execute additional conditions that the current BPEL engine doesn’t provide. The new system using functions of BPEL supplied by B2J. The new system can be used to add a new rule engine, which isn't currently provided.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.99-114
• /
• 2018

Saekdong is a unique Korean fabric that has been used since ancient times, and it is woven with the plain or satin weave so that vertical stripes appear by various colored warp threads of equal spacing. Saekdong means pleasure, joy, serenity, heavenly blessing, spirituality, wind, and abundance, expressing the optimistic and positive sentiment of Korea's forefathers. This study investigated how ancient Saekdong occurred with meanings. As a research method, this study used literature review and surfing newspapers and photographs, museum and internet search, even from other fields such as earthenware, bronze, and traditional dance. We collected Saekdong and the lifestyles of ethnic Koreans living in China, investigated the Asuka culture of Japan, and the tomb murals of Takamatsu-Chong, which are Baekje and Goguryeo settlement areas. The results are as follows: First, it expresses happy occasion, pleasure, and joy, and expresses a desire for good things to be repeated and lasting. Second, it symbolizes simple beauty, order, equality and harmony of many tribes. Third, Saekdong is life and power which represent a sacred, heavenly, mysterious bird. Fourth, it symbolizes abundance and wealth, rain, wind or fields. Finally, this study showed the brilliance and pride of Korean hanbok through Saekdong. The significance of this study is to examine the symbolism and inherent aesthetic characteristics of Saekdong and to show the unique value and spiritual heritage of the Korean people.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.938-943
• /
• 2018

Thin nano-sized fibres were prepared by an electrospinning method. The spinning appratus consisted of pump for polymer injection, nozzle and nozzle rotus, and an aluminum plate collected the polymer fibers. Its surface was chemically modified for selective improved adsorption of carbon monoxide at indoor level. The chemical activation enabled to form the fibres 250-350 nm in thickness with pore sizes distributed between 0.6 and 0.7 nm and an average specific surface area of $569m^2/g$. The adsorption capacities of pure (100%) and indoor (0.3%) $CO_2$, of which level frequently appears, at the ambient condition were improved from 1.08 and 0.013 to 2.2 and 0.144 mmol/g, respectively. It was found that the adsorption amount of $CO_2$ adsorbed by the chemically activated carbon nanofiber prepared through chemical activation would vary depending on the ratio of specific surface area and micropores. In particular, chemical interaction between adsorbent surface and gas molecules could enhance the selective capture of weak acidic $CO_2$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.78-85
• /
• 2023

This study evaluates the performance of reinforced concrete columns using hybrid fiber sheets for structural behavior. The purpose of this method is to improve the load-bearing capacity of the reinforced structure by impregnating a hybrid fiber sheet, which is woven by arranging aramid and glass fibers uniaxially and attached to an aged concrete structure requiring reinforcement with epoxy. In particular, not only the weight reduction of the material obtained by using a fiber lighter than the steel material, but also the low-strength, high-toughness fiber element among the fibers used delays the brittle fracture of the high-strength, low-toughness fiber element. The low-strength, high-toughness fiber element among the fibers used delays the brittle fracture of the high-strength, low-toughness fiber element, resulting in weight reduction compared to steel. The study conducted structural tests on four specimens, with the hybrid reinforcement method and failure mode as main variables. Specimen size and loading conditions were chosen to be comparable with previous studies. The structural performance of the specimen was evaluated using energy dissipation capacity and ductility. Analysis shows that excellent results can be obtained with the hybrid fiber sheet reinforcement.

• KSBB Journal
• /
• v.14 no.3
• /
• pp.309-314
• /
• 1999

In order to produce high concentration of sodium gluconate, optimization of the fermentation conditions, such as glucose concentration, inoculum size, dissolved oxygen concentration and glucose feeding method, was examined. When the glucose concentration was maintained in the range of 30∼50 g/L during the batch fermentation, glucose conversion yield and productivity were 92.2% and 6.0 g/L/hr, respectively. In the case of the low concentration below 30 g/L, the yield decreased by about 25%. As the inoculum size increased above 20%(w/v), lag phase was shortened but the productivity decreased. The dissolved oxygen level of 60∼70% was shown to be the threshold point for 75% of increase in the productivity of sodium gluconate. Finally, optimal glucose feeding rate was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and was determined using various feeding methods such as exponential feeding, feeding based on the average glucose consumption rate and on the oxygen uptake rate and etc. Our result shows that glucose feeding, based on the oxygen uptake rate is a very simple, efficient and robust method, especially when oxygen is consumed as a substrate for the bioconversion. Using the above glucose feeding strategy under the optimized condition, 255 g/L of sodium gluconate concentration, 12 g/L/hr of productivity and 95% of glucose conversion yield were achieved with A. niger ACM53.

• Korean Journal of Weed Science
• /
• v.4 no.1
• /
• pp.26-38
• /
• 1984

To investigate the varietal differences of weed competitive functions under the four different seeding and transplanting methods, rice cultivars, Milyang 23 and Sadominori, were used with the seven weeding methods, namely, weedy check, weed-free, once weeding at 3, 6, 9, and 12 weeks and two times weeding at 3 and 9 weeks after seeding/transplanting, respectively. As a result, the proper and reasonable weeding stages and times by total and respective weed group were estimated. Also the constructive characteristics for yield formations were evaluated under the different competitive conditions as affected by various cropping patterns.

• Korean Journal of Weed Science
• /
• v.12 no.1
• /
• pp.61-69
• /
• 1992

Weed control in mid season of rice fields was systemized earlier in Korea than in Western Europe or China. The most representative method was pull out the weeds by hand followed by 'Seojibeob'(鋤地法 : method of hoeing) after draining. It was practiced 3 to 4 times to do extensively. Also, the purposes of transplanting arid direct seeding in rows were to manage weed problems effectively, which means that the development of cultural techniques is closely related to 'Seojibeob'(鋤地法). From the 17th century, techniques of deep plowing(because of principal : 'Simkyonginu'(深耨易耕 : Deep plowing make easy to hoe) and 'Hwanubeob'(火耨法 : derived from 'Hwakyong soonubeob) for effective weed management of waste lands were newly adopted and spreaded due to the situations ant that time. Thus, the practice of large-scale farming resulted from the adaptation of the techniques and methods described above. In the 18th to 19th century, the cultural methods, not much different from 'Seojibeob', were changed and the number of weeding was decreased. Especially, the techniques of dry seeding of rice were practiced by originating the ideal 'Seojibeob', in which water availability was improved in northern drought areas and also weed problems were easily managed. In addition, intensively large-scale farming showed weed management problems, so that 'Cheonilrok'(千一錄) by Woo Ha-young described the techniques of 'Banjongbeob'(反種法) or 'Hwanubeob' and in the end of the Chosun dynasty extensively large-scale farming was practiced by putting intensive and extensive techniques together. As the results, agricuitural productivity of Korea was increased 5 times by that time.

• Journal of Preventive Medicine and Public Health
• /
• v.19 no.1 s.19
• /
• pp.16-30
• /
• 1986

In order to prepare the fundamental data for the improvement of noisy working environments and the effective hearing conservation program on workers exposed to industrial noise, the authors surveyed the working processes and evaluated the noise levels on 56 manufacturing industries in Pusan area from April to July in 1985. The results were summarized as follows : 1. The noise level was the highest in shipbuilding and repairing(95.6 dBA), and followed by steel rolling(94.0 dBA), manufacture of motor vehicles(93.1 dBA), manufacture of fishing nets(92.9 dBA), manufacture of testiles(92.5 dBA), iron and steel foundries(89.3 dBA), manufacture of metal products(89.1 dBA), preserving and processing of marine foods(87.0 dBA), manufacture of rubber products(85.3 dBA), manufacture of plywood(84.9 dBA) and manufacture of paints(84.5 dBA). 2. Among fifty surveyed working processes, the noise level of twenty-one processes (42%) exceeded the threshold limit value for 8 hours per day. 3. As the allowable exposure times by governmental threshold limit values to industrial noise level(dBA), cocking of shipbuilding and repairing and plating(CGL) of steel rolling were the shortest(30 minutes), and followed by assembling(rivet) of manufacture of motor vehicles(1 hour) weaving of manufacture of textiles and shot, machine, pipe laying of shipbuilding and repairing(2 hours). 4. By the result of octave band analysis on noisy working processes in excess of 90 dBA, the sound level was the highest at 2,000 Hz or 4,000 Hz. 5. It was recognized that the measurement of overall sound pressure level was also effective as octave band analysis in evaluating the industrial noise.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.80-98
• /
• 2023

In the late Joseon Dynasty, when the bride would ride a palanquin when she went to live with her in-laws, it was a custom to cover the palanquin with tiger skin to ward off misfortunes that may come her way. The higher classes used tiger skin or leopard skin for this purpose, but the common people had to substitute this expensive item with a tiger pattern painted on a blanket. Such blankets were called hotanja, hogu, hoguyok and the like. The term "hotanja" is a pure Korean word. It is not known when the cover for the bridal palanquin was first used, but it was popular from the end of the 19^th century and then gradually disappeared. This is due to the introduction of new Western style weddings that eliminated the need for a bridal palanquin. The tiger print blanket was used not only to cover the bride's palanquin but also to cover a table or floor during the wedding ceremony. This study ran a material analysis on nine pieces of tiger print blankets. All of the blanket artifacts examined in this study had an outer cover and a lining made of fabric that used cotton thread for the warp and wool thread for the weft. Two kinds of wool were found in the weft thread in the outer covers: fat-tailed sheep hair from China and goat hair for carpets from the Hebei province, China. Records show that "blankets with painted tiger patterns" were imported from Russia, and the imported blankets were from Russia and China. The outer cover can be categorized into six types, and the lining into three types depending on the weave and direction of the thread twist. The hem facing can be divided into four types. The lining and outer cover use the full width of the fabric, which was woven in wide widths of 135 cm or wider. The tiger pattern on the blanket was made by stenciling. The stencil design of the body and tail of the tiger were placed on a red blanket to be painted in white, and then the background color of the tiger, which is yellow, would be painted over the white, and then black stripes would be added. The pattern of the tiger varies, which shows that the blankets were made by various craftspeople. The pattern of the tiger print blanket is usually of a tiger lying down, but there were tiger print blankets with a tiger standing up. The pattern of the tiger grew smaller over time, and flower patterns were added in the background. Decorative elements were gradually added to the tiger print blanket patterns, but its function as a palanquin cover became lost. By taking the features of tiger print blankets into consideration, it can be assumed that there are imported pieces among the remaining pieces, and were produced in various places because it was popular at that time.