• Korean journal of food and cookery science
• /
• 제13권4호
• /
• pp.472-477
• /
• 1997

Iron was bound to neutral detergent fiber (NDF) obtained from 15 kinds of vegetables commonly consumed in Korea. Iron binding capacity of NDF ranged from 37.83% to 85.51%, and it increased as the pH increased and reached to the maximum at pH 7 in all vegetables. The amount of Fe bound to NDF increased as the Fe concentration increased.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• 제42권12호
• /
• pp.1037-1044
• /
• 2014

In this study, we designed a drop test system considering lunar surface environment and tested landing gear of experimental lunar lander. The lunar lander would be landed at soil place for soft landing. When the lunar lander touches down, the acceleration of the lander is largely affected by mechanical characteristics of the lunar soil. Accordingly, a drop test using lunar soil is needed to verify the performance of the lunar landing gear. Because the lunar soil is not available generally, we developed a lunar simulant KAUMLS(Korea Aerospace University Mechanical Luna Simulant) based on mechanical properties of the lunar soil of NASA's LUNA PROJECT. In addition, drop tests on steel plate and dry sand are performed to evaluate impact characteristics by the surface environment.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• 제17권2호
• /
• pp.95-106
• /
• 2006

Iron was bound by neutral detergent fiber(NDF) obtained from 15 kinds of vegetables being consumed commonly in Korea. Binding capacity of Fe of NDF ranged from 37.83% to 85.51%. Fe binding capacity of NDF increased as pH increased and reached to a maximum at pH 7 in all vegetables. The amount of Fe bound to NDF increased as Fe concentration increased.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제42권5호
• /
• pp.64-72
• /
• 2014

This study quantified the storage and annual uptake of carbon by apple trees in orchards as a production-type greenspace, and computed the annual carbon emissions from apple cultivation. Tree individuals in the study orchards were sampled to include the range of stem diameter sizes. The study measured biomass for each part including the roots of sample trees through a direct harvesting method to compute total carbon storage per tree. Annual carbon uptake per tree was quantified by analyzing the radial growth rates of stem samples at ground level. Annual carbon emissions from management practices such as pruning, mowing, irrigation, fertilization, and use of pesticides and fungicides were estimated based on maintenance data, interviews with managers, and actual measurements. Regression models were developed using stem diameter at ground level (D) as an independent variable to easily estimate storage and annual uptake of the carbon. Storage and annual uptake of carbon per tree increased as D sizes got larger. Apple trees with D sizes of 10 and 15 cm stored 9.1 and 21.0 kg of carbon and annually sequestered 1.0 and 1.6 kg, respectively. Storage and annual uptake of carbon per unit area in study orchards were 3.81 t/ha and 0.42 t/ha/yr, respectively, and annual carbon emissions were 1.30 t/ha/yr. Thus, the carbon emissions were about 3 times greater than the annual carbon uptake. The study identified management practices to reduce the carbon footprint of production-type greenspace, including efficient uses of water, pesticides, fungicides, and fertilizers. It breaks new ground by including measured biomass of roots and a detailed inventory of carbon emissions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제37권6호
• /
• pp.1043-1051
• /
• 2017

Asphalt overlay on deteriorated concrete pavement has a problem of early damage due to reflective cracking. There is a need for a new method capable of reducing reflection cracking and ensuring the durability of pavement. The purpose of this study was to obtain durability of asphalt overlay with stress absorbing membrane interlayer (SAMI) using epoxy asphalt binder. The tensile performance, durability, water resistance and bonding performance of Epoxy-SAMI were evaluated by various tests. As a result of tests, Epoxy-SAMI meets the quality standard of the bridge waterproofing material. The repeated direct tensile test was carried out to investigate the effect of reflective cracking reduction. When the Epoxy-SAMI was applied, it had 1.2~1.56 times higher reflective cracking resistance than PSMA asphalt concrete with the thickness of 10cm even if the section thickness decreased. 4-point bending beam test results showed the number of fatigue failures increased 7.5 times when Epoxy-SAMI was applied. The Epoxy-SAMI was found to be effective in improving the durability of the asphalt pavement overlay because it serves to prevent reflective cracking, increase lifespan, and function as a waterproof layer.

• Progress in Medical Physics
• /
• 제14권2호
• /
• pp.74-80
• /
• 2003

The purpose of this study was to evaluate the performance of the teflon encapsulated TLD rod, which may be used in nuclear medicine for the direct in vivo measurements of radiation dose. We analyzed the influence of teflon encapsulation for measuring absorbed dose. An experiment was carried out to evaluate and observe the response of a LiF TLD-100 rod in a thin-wall teflon capsule at different depths in a solid phantom. An adult anthropomorphic phantom was used to measure the absorbed dose using thin teflon encapsulated TLD. The measurements of PDD-, and TMR in solid phantom and athe bsorbed dose in humanoid phantom performed with normal TLD were compared with values obtained by teflon encapsulated TLD. It was demonstrated that the difference of TL response of LiF in phantom with and without teflon thin-wall capsule was less than 3％ under the same conditions beyond the build-up region. However, significant differences were observed near the phantom surface because of the build-up effect caused by the thin-wall thickness of the teflon capsule. Thus, our study showed that the contribution of teflon thin-wall capsule to TLD response for the megavoltage photon beams was negligible and that it did not significantly effect dose measurement. The teflon encapsulated TLD described in this work has been proven to be appropriate for in vivo dosimetry in therapeutic environments.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제26권2호
• /
• pp.157-166
• /
• 1981

Laboratory experiements were conducted to evaluate water uptake and osmotic potential of soybean seeds associated with germinability. Bonus, Wayne, Essex and Pickett were selected for this study. Large and small seeds from the four varieties were included in water uptake measurements at $25^{\circ}C$ There were significant differences in water uptake during germination due to seed size and cultivars at optimum moisture condition, -6 and -15 bars soil moisture. As water stress increased, the water uptake of Pickett and Essex were superior to Bonus and Wayne, and small seeds were superior to large seeds. The seed moisture content at germination was 60.8% on a fresh weight basis under optimum moisture condition. The minimum moisture contents necessary for the germination were 50.2% at -6 bars and 50.9% at -15 bars. There were significant differences among varieties in seed osmotic potential during germination, although these differences depended on imbibition time. The average osmotic potential ranged from -32.0 bars after 4 hours imbibition to -11.2 bars at the beginning of germination. The correlation coefficient between seedling length and osmotic potential was not significant after any period of imbibition, suggesting that osmotic potential is not directly associated with seedling growth. However, osmotic potential is closely related to water uptake capacity of soybean seed.

• Journal of Soil and Groundwater Environment
• /
• 제6권2호
• /
• pp.15-22
• /
• 2001

Radiocarbon ($^{14}C$) and tritium in water have been applied to hydrogeology as a tool for dating of groundwater. The long half-life of $^{14}C$(5,730 years) makes it useful for evaluation of residence time of groundwater, However, the $^{14}C$ has not been applied to groundwater studies in Korea, owing to the absence of preparation line for $^{14}C$ analysis. By this time $^{14}C$ of groundwater has been analyzed mainly using benzene synthesizer, which is so complicate and time-consuming that has been is limitedly applied to hydrogeology. Recently, the direct $CO_2$ absorption method for $^{14}C$ analysis was developed and introduced to KAERI for the evaluation of domestic groundwater system. The results of $^{14}C$ in groundwater would be usefully applied to hydrogeological studies such as the well understanding of groundwater flow system in depth. The reliability of our $^{14}C$ data was confirmed by inter-comparison with the qualified international isotope laboratory.

• Journal of the Korean Solar Energy Society
• /
• 제34권5호
• /
• pp.65-72
• /
• 2014

In this paper, the water-based Ag nanofluids are synthesized by the chemical reduction method and their extinction coefficients are measured by an in-house developed measurement device. The Ag nanofluids are manufactured by the chemical reduction method with the mixing of silver nitrate ($AgNO_3$) and sodium borohydride ($NaBH_4$) in an aqueous solution of polyvinyl pyrrolidone (PVP). The extinction coefficients of Ag nanofluids are measured by means of the in-house developed apparatus at a wavelength of 632.8nm according to the particle volume fractions. The results show that the extinction coefficient of water-based Ag nanofluids increases with the increase of nanoparticle concentrations. Finally, the temperature field and efficiency of direct absorption solar collector (DASC) are analytically estimated based on the measured extinction coefficient of water-based Ag nanofluids. The results indicate that the direct absorption solar collectors using nanofluids have the feasibility to improve the efficiency of conventional flat-plate solar collectors without using an absorber plate.

• Journal of the Korean Chemical Society
• /
• 제36권2호
• /
• pp.273-281
• /
• 1992

A new sputtering chamber, as Atomsource, for atomic absorption measurements was designed and built to have maximum ground state atoms in view and minimum emission. The high velocity gas jets not only change the visual and electrical characteristics of the discharge, but also increase the amount of material atomized, as is apparent from the craters that are produced in the sample where the jets strike the surface. The use of gas jets in a sputtering cell makes this a direct sampling method practical for atomic absorption spectrometry. The factors influencing absorption sensitivity and reproducibility have been investigated for the newly developed atomizer.