• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.137-143
• /
• 2011

본 연구는 4실린더 커먼레일 디젤엔진에 바이오디젤 혼합 디젤연료를 적용하였을 경우 엔진의 연소특성과 배출물 저감효과를 실험적으로 구한 것이다. 실험 연료는 바이오디젤 20%와 디젤연료 80%(체적분율)를 혼합한 BD20과 저유황디젤연료(ULSD)를 사용하였으며, 연료분사압과 엔진회전수를 변수로하여 실험을 수행하였다. 실험결과 B20과 ULSD 모두 연료분사압력이 증가함에 따라 NOx 배출농도는 증가하고, Soot 배출량은 감소하는 경향을 나타내었다. 특히 BD20의 경우 ULSD와 비교하여 NOx 배출농도는 다소 증가하였으나, Soot 배출량은 현저하게 감소하였다. 또한, 회전속도가 1000rpm에서 2000rpm으로 증가함에 따라 NOx 배출농도는 감소하고, Soot 배출량은 낮은 분사압력에서 현저히 증가하는 경향을 나타내었다.

• 한국분무공학회지
• /
• 제12권4호
• /
• pp.211-219
• /
• 2007

The liquid film thickness inside a pressure-swirl nozzle was measured, and then the measured liquid film thickness was compared with the results from previous empirical equations. The liquid film inside the nozzle was visualized using extended transparent nozzles and a microscopic imaging system, and then the measurement error was evaluated using optical geometry analysis. The high injection pressures up to 7MPa were adopted to simulate the injection conditions of the direct-injection spark-ignition engines. The totally different two injectors with different fuels, nozzle lengths, nozzle diameters and swirlers were utilized to obtain the comprehensive equations. The results showed that the liquid film thickness very slightly decreased at high injection pressures and the empirical equations overestimated the effect of injection pressure. Most of empirical equations did not include the effect of nozzle length and swirler angle, although it caused significant change in liquid film thickness. A new empirical equation was suggested based on the experimental results with the effects of fuel properties, injection pressure, nozzle diameter, nozzle length and swirler angle.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.103-111
• /
• 2006

The spray behavior of direct-injection spark-ignition(DISI) engines is crucial for obtaining the required mixture distribution for optimal engine combustion. The spray characteristics of DISI engines are affected by many factors such as piston bowl shape, air flow, ambient temperature, injection pressure and fuel temperature. In this study, the effect of fuel temperature on the spray and combustion characteristics was partially investigated for the wall-guided system. The effect of fuel temperature on the fan spray characteristics was investigated in a steady flow rig embodied in a wind tunnel. The shadowgraphy and direct imaging methods were employed to visualize the spray development at different fuel temperatures. The microscopic characteristics of spray were investigated by the particle size measurements using a phase Doppler anemometry(PDA). The effect of injector temperature on the engine combustion characteristics during cold start and warming-up operating conditions was also investigated. Optical single cylinder DISI engine was used for the test, and the successive flame images captured by high speed camera, engine-out emissions and performance data have been analyzed. This could give the way of forming the stable mixture near the spark plug to achieve the stable combustion of DISI engine.

• 동력기계공학회지
• /
• 제15권1호
• /
• pp.5-10
• /
• 2011

The spatial fuel vapor distribution of the homogeneous charge by a 6-hole injector was examined in a optically accessed single cylinder direct injection spark ignition(DISI) engine. The effects of in-cylinder charge motion, and fuel injection pressure, and coolant temperature were investigated using a planar LIF (Laser Induced Fluorescence) technique. It was confirmed that the in-cylinder tumble flow played a little more effective role in the spatial fuel vapor distribution than the swirl flow during the compression stroke at 10 mm and 2 mm planes under cylinder head gasket and the increased fuel injection pressure activated spatial distributions of the fuel vapor. In additions, richer mixtures were concentrated around the cylinder wall by the increase of the coolant temperature.

• 한국산업융합학회 논문집
• /
• 제19권1호
• /
• pp.31-38
• /
• 2016

Since the oil shock of 1970's there was a strong upward tendency for the use of the high viscosity and poorer quality fuels. Therefore the misfiring engine occurs due to the decrease of quantity injected for lean burn and emission control in Compression Ignition Common Rail Direct Injection diesel engine. In this study, it is designed and used the test bed which is installed with fuel injector controller. In addition to equipped engine using CRDI by controlling the injection timing with mapping modulator, it has tested and analyzed the engine performance and combustion characteristics, as it is varied that they are the operating parameters: fuel injected quantity, engine speed and injection timing.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.33-38
• /
• 2002

An optical single cylinder diesel engine equipped with a common-rail injection system has been built to investigate diesel combustion and emission characteristics. Three optical widows (piston crown quartz for bottom view of the cylinder, upper piston quartz for allowing laser sheet and liner quartz for side view) have been placed in the optical engine to visualize spray characteristics and combustion process inside the cylinder. Before doing further research using various optical diagnostics with the optical engine, fundamental combustion experiments and flame visualization incorporating a high speed motion analyser have been carried out with a wide range of engine operating conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.726-731
• /
• 2000

This study was experimentally analyzed to improve the performance and to reduce exhaust emissions in a turbochaged D.I. diesel engine of the displacement 9.4L. In generally, the system of intake port, fuel injection and turbocharger are very important factors which have influence on the engine performance and exhaust emission because the properties in the injected fuel depend on the combustion characteristics. The optimum results which is tested as available factors fur better performance and emission are as follows; the swirl ratio is 2.43, compression ratio is 16, combustion bowl is $5^{\circ}$ re-entrant type, nozzle hole diameter is ${\phi}0.28*6$, injection timing is BTDC $13^{\circ}CA$ and turbocharger is GT40 model which are selected compressor A/R 0.58 and turbine A/R 1.19.

• 오토저널
• /
• 제8권2호
• /
• pp.13-21
• /
• 1986

점차 엄격해지는 요구조건을 만족시켜 주기 위해서는 승용차용 엔진의 실제특성과 운전특성을 지 배하는 설계변수의 조절은 불가피하며, 그중에서도 엔진의 핵심부인 연소질의 설계는 가장 중요 하다. 부분 부하에서의 SI기관의 연료경제성을 향상시키는 가장 좋은 방법이 압축비를 상승시 키는 것이므로, 앞으로의 여소실은 고압축비에서도 옥탄가가 높은 연료를 요구하는 성향을 낮 추는 특성을 갖고 있어야 한다. 새로운 엔진의 향상을 최적화하기 위하여는 quench area의 크 기와 위치 그리고 적절한 quench distance의 성질이 중요하며, 또한 연소실의 소형화, 스파크 플러크의 위치, 표면적/체적의 비 그리고 화염전파거리등도 고려에 넣어야 한다. 승용차용 엔진의 요구조건은 연소실을 피스톤 크라운에 위치시키는 용이한 방법을 통하여 해결될 수 있으며, 이 러한 형상의 연소실은 실린더 헤드에 장치한 연소실과 비교하여 다음과 같은 장점을 갖고 있다. - 스파크 플러그 주변에 연소실을 배치하기 쉽다. - 연소실 내에 quench area의 설정이 자유롭다. - 연소실 layout의 개조없이 압축비의 설정이 자유롭다. - 연소실의 조합이 간단하다. - 실린더벽으로의 열손실이 감소되어 열효율이 증대된다. - 공연비의 희박가능한계가 크다. - EGR성능이 향상되어 NOx 의 배출과 연료소비율이 감소된다. - 필요하다면 연소실실 또는 직접분사식 Diesel 기관으로서의 개조가 간단하다. 만약 생산단가가 크게 상승하지 않는다면, NOx의 배출과 연료소비율이 작으면서도, 비출력이 큰 4-밸브 연소실이 실용화 될 전망이다.

• 한국자동차공학회논문집
• /
• 제14권4호
• /
• pp.26-31
• /
• 2006

An experimental investigation of an early injection strategy was conducted on a small single cylinder common-rail DI diesel engine to reduce the oxides of nitrogen($NO_x$) emission. The main objectives of this study were to investigate the emissions, performance and combustion characteristics in a diesel engine with early and two-stage injections. The two- stage injection was conducted to reduce the wall-wetting of early injected fuels on the cylinder wall or to promote the ignition of premixed charge. The engine test was performed at conditions of 1500rpm, injection timing ranging from TDC to BTDC $80^{\circ}$. The experimental results show that $NO_x$ emissions were decreased in both cases of early injection and two stage injection compared to the conventional diesel combustion by the near TDC injection. However, soot and products of incomplete products (i.e. HC and CO) are slightly increased. Also, the second injection near TDC promoted the ignition of premixed fuel, therefore, IMEP was increased.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.45-51
• /
• 2012

This work was investigated 2-stage injection strategy on combustion and emissions in a direct injection compression-ignition engine fueled with DME. Single cylinder engine was equipped with common rail. Injection pressure was 700bar, dSOI between the main injection and the pilot injection was varied. Diesel was used as compared fuel of DME in all cases. The results was shown that maximum pressure was higher than all cases and its amount of DME and diesel was similar. Regardless the pilot injection, the main fuel injection timing was same. The heat release rate of the main injection for diesel was high while that of pilot injection for DME was high. The THC was very low regardless of the fuel type and injection strategy. In the single injection, NOx was increased to retard of main injection timing regardless of the fuel type. NOx emissions was decreased with the retardation of the main injection timing regardless of the fuel type in the case of 2-stage injection strategy.