• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.73-86
• /
• 2019

Seafaring is an important occupation that requires stringent hand hygiene practices as a basic method for preventing food-borne illness and infectious diseases when the diseases occur on board. The purpose of this study is to provide fundamental data for the prevention of food-borne illness and infectious disease on the ship by investigating the level of hand hygiene practices and influencing factors. A total of 222 seafarers were surveyed at a seafarers' educational institution between July and August 2017. Their hand hygiene practice were examined by a modified method using the guidelines which are recommended by the World Health Organization, the Centers for Disease Control and Prevention, and Hand Hygiene Australia. The mean of hand hygiene practice was 47.97 out of 75 points. By category, the most frequent hand hygiene practice was measured as 4.04 on a 5-point scale as 'after working'. Factors affecting hand hygiene practices were ship tonnage relating to in job characteristics, exercise in health-related characteristics, and soap in relation to the characteristics of the hand hygiene environment on board. To improve hand hygiene among seafarers, it is necessary to raise awareness of hand hygiene among seafarers who work on small ships in particular, and to improve the systems of hand hygiene on ships with continuous education, hygiene practice evaluation and feedback.

• Journal of Practical Engineering Education
• /
• v.11 no.1
• /
• pp.61-73
• /
• 2019

Recently the Korean life-long occupational skill development system is undergoing rapid change and innovation on the basis of NCS (National Competency Standards). In order for the NCS-based occupational training system to be successfully established, it is required to be accepted and applied in the higher education. Universities, however, hesitate to adopt NCS-based contracted education programs of the work-and-study cooperative system due to low relevance of university education to industrial needs and absence of the reference operation model for the NCS-based contracted education programs considering Korean small companies' particular needs. This study aims to develop and apply a reference operation model for NCS-based contracted education programs of the university-linked work-and-study parallel system, focusing on the Department of Mechanical Design Engineering of College of Work and Study in Parallel, Koreatech. In addition, several operational guidelines are suggested within the framework of current law and regulations for successful diffusion of the NCS-based reference operation model. The results of this study are expected to contribute to nation-wide proliferation of NCS-based contracted education programs in the higher education and motivating companies and universities to participate in the work-and-study parallel initiatives.

• Journal of Practical Engineering Education
• /
• v.14 no.1
• /
• pp.127-136
• /
• 2022

As manufacturing items have changed in various ways, changes in the mass production of small-scale small-scale production of multiple varieties have become commonplace. As a result, the method of the manufacturing site has also changed, and the "smart factory," which emphasizes the production efficiency aspect using automation lines and big data of factories, is in the spotlight according to the global market economy. The introduction performance of smart factories has a positive effect in terms of production efficiency and is drawing a steep upward curve. In addition to the positive aspects, the aspect that needs to be supplemented in the future is the support and cooperation of specialized smart equipment suppliers, but education on standardized smart factories and the relocation of existing manpower, education, evaluation, and creative production that robots cannot replace Various support measures are also needed for activities. In addition, continuous management and systematic education are required to enter the upper stage. Through the case of companies that have built smart factories, it is intended to emphasize the need for proper use of manpower and support management for settlement and maintenance after introduction and continuous on-the-job training through the comparison of productivity before and after introduction to ensure the effect continues.

• Journal of Digital Policy
• /
• v.2 no.3
• /
• pp.25-32
• /
• 2023

This study was done clarify the concept of clinical nurse's self-efficacy. This study was conducted using Walker & Avant's concept analysis framework, There were five aspects of the concept of Clinical Nurse's Self-Efficacy: To have faith and expectation that nurses can overcome stress and adversity in the clinical environment, To have a clear direction by believing that nurses themselves have the ability to perform nursing tasks, Allowing nurses to continue their work by believing that they have appropriate judgment to control various situations in clinical practice, Having a challenging sense of goal and motivating for the future through active participation in nursing work, and influencing various aspects from individual nurses to patients and hospital organizations. This conceptual analysis of clinical nurses' self-efficacy can recognize the need to prepare an educational system to improve nurses' self-efficacy and conduct related research.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.19-29
• /
• 2022

This study is a descriptive survey using a self-reported survey method to understand the effect of language and non-verbal communication of medical service providers on customer satisfaction through Lapport and to determine the degree of impact on Lapport by adjusting perceived service authenticity. The data collection period was from April 5 to April 30, 2021. Using the convenience sampling method, data were collected from users of medical institutions located in Busan and Gyeongsangnam-do, and a total of 306 valid questionnaires were used as statistical analysis data. The collected data were analyzed using the IBM SPSS statistics version 25.0 and AMOS 20.0 programs through a coding process. In the results of this study, it was found that the language and non-verbal communication of medical service providers influenced customer satisfaction through Lapport, and the perceived service authenticity in the relationship between each variable acts as a moderating effect. Considering that the language and non-verbal factors of the medical service provider are important in the interaction between the medical service provider and the hospital user, the medical service provider should take full account of the language and non-verbal factors and help the medical institution communicate with the hospital user.

• Journal of Korean Home Economics Education Association
• /
• v.36 no.2
• /
• pp.101-117
• /
• 2024

The aim of this study is to identify the competencies required for fashion-related majors that meet contemporary demands, align with the objectives of university education, and reflect the qualities desired in graduates. To achieve this goal, we conducted content analysis of relevant data and in-depth interviews with experts. First, the content analysis involved coding key information from the introductions, educational goals, desired qualities of graduates, and curricula published on the websites of both South Korea and international fashion-related universities. Additionally, we analyzed the National Competency Standards (NCS) and the Meta-goals of higher education programs set by the International Textile Apparel Association (ITAA), extracting six core competencies. Second, in-depth interviews were conducted with six experts, each with 23 to 31 years of experience in Korean and international apparel industry and academia. The interviews were recorded, transcribed, and keywords were extracted. To ensure the validity of the coding results, cross-checks were performed among the researchers. The analysis identified the following competencies: empathic communication, social responsibility, professional thinking, creative and integrative thinking, global perspective, and challenging leadership. Based on these findings, establishing competencies that meet contemporary demands and developing corresponding curricula are essential steps towards creating a feedback system. Future research should focus on developing and implementing curricula that foster a virtuous cycle, ultimately enhancing students' competency levels.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.5
• /
• pp.77-82
• /
• 2024

The purpose of this study is to determine how satisfied adult learners are with school life when transitioning back to social life after obtaining a college degree, and to seek ways to improve education through analysis of future educational needs. Suggestions for the results are as follows. First, programs to improve adult learners' basic learning abilities must be continuously supported. As a result of the survey on satisfaction with the basic learning ability improvement program, 92% of respondents responded above average, so continued support for basic learning programs is required to help adult learners make up for their academic gap. Second, in the case of club activities and major certificate acquisition programs, the response rate was above average at 92%, indicating that students were overall satisfied with their school life. Third, there is a continued need for expanded application of classes that combine field practice in the subject area. Fourth, the development of liberal arts education subjects that reflect social needs is continuously required. Fifth, substantial operation of field experience programs is necessary. Junior colleges are higher education institutions that train experts. In order to cultivate practical talents who are closely related to the field after graduation, future field experience programs are required to be operated to help with major jobs.

• 한국사회정책
• /
• v.25 no.2
• /
• pp.429-446
• /
• 2018

The $4^{th}$ Industrial Revolution, symbolizing the explosive innovation of digital technologies, is expected to have a great impact on labor relations and produce a lot of contested issues. The labor-management issues, created by the $4^{th}$ Industrial Revolution, are as follows: (1) employment restructuring, job re-allocation, and skill-reformation, driven by the technological displacement, resetting of worker-machine relationship, and negotiation on labor intensity and autonomy, (2) the legislation of institutional protection for the digital dependent self-employed, derived from the proliferation of platform-mediated labor, and the statutory recognition of their 'workerness', (3) unemployment safety net, income guarantee, and skill formation assistance for precarious workeforce, (4) the protection of worker privacy from workplace surveillance, (5) protecting labor rights of the digital dependent self-employed and prcarious workers and guaranteeing their unionization and collective bargaining. In comparing how labor unions in Western countries have responded to the $4^{th}$ Industrial Revolution, German unions have showed a strategic approach of policy formation toward digital technological innovations by effectively building and utilizing diverse channel of social dialogue and collective bargaining, while those in the US and UK have adopted the traditional approach of organizing and protesting in attempting to protect the interest of platform-mediated workers (i.e. Uber drivers). In light of the best practice demonstrated by German unions, it is necessary to build the process of productive policy consultation among three parties- the government, employers, and labor unions - at multi levels (i.e. workplace, sectoral and national levels), in order to prevent the destructive damage as well as labor-management confrotation, caused by digital technological innovations. In such policy consultation procesess, moreover, the inclusive and integrated approach is required to tackle with diverse problems, derived from the $4^{th}$ Industrial Revolution, in a holistic manner.

• Korean Security Journal
• /
• no.42
• /
• pp.361-391
• /
• 2015

Regarding the [Government Organization Act; which is legislated on 19th November, 2014] Korea Coast Guard(KCG) has been re-organized and belong from Korea Coast Guard shall be established under the Minister of Oceans and Fisheries to Ministry of Public Safety and Security. Furthermore, National Police Agency(NPA) Commissioner has the right for administer duties concerning investigation and information by succession from Korea Coast Guard Commissioner. That means that main rule has been moved from prior KCG to Ministry of Public Safety and Security(MPSS) and NPA currently which is dual structure. Meanwhile, This kind of organization change has been effective to investigative agency which exert KCG's call of duty and causes needs of variety problems. In other words, There are quite huge changes such as KCG's reduction of their work, call of duty and re-organization regarding revised government organization act. However this change - including re-organization by government, was not able to take current MPSS's special features such as organization specialty and legal rights. It means, the current change has not been taken present law system CRIMINAL PROCEDURE LAW and there was no preparation to stable maritime police authority action as well. To sum up, this revised GOVERNMENT ORGANIZATION ACT is supposed to provide total, quick security service by establishing strong disasters and safety control tower. However they only contains few area such as organization revision regarding 'Sewol Ferry Disaster', they was not able to contain the other parts of Society. Therefore, in this article I would like to check the part of re-evaluation of current change made by KCC's organization revision. It is supposed to provide better legal stability by making clear of work area by government agencies who acts maritime police authority.

• Journal of dental hygiene science
• /
• v.18 no.6
• /
• pp.340-348
• /
• 2018

The purpose of this study was to examine the perceptions, precedent tasks, positive and negative effects, and expandable professional tasks regarding the inclusion of dental hygienists (DHs) in the category of medical personnel. This study involved a survey of 259 DHs and 128 dentists. The findings were as follows: 94.2% of DHs and 46.9% of dentists were aware of inclusion in the category of medical personnel; 95.0% of DHs and 64.1% of dentists supported the idea; and 84.9% of DHs and 51.6% of dentists recognized its legitimacy. As for precedent tasks for inclusion in the category of medical personnel, both DHs and dentists scored high points in professional consciousness in the area of occupation. Both DHs and dentists scored the highest points in the quality management of DH education and the lowest points in the unification of school systems in the area of institution. In the area of society, DHs scored high points in the persuasion of the central government, whereas dentists scored high points in collaboration among concerned organizations. Regarding the positive effects of inclusion in the category of medical personnel, both DHs and dentists scored the highest points in the expanded perception of DHs. As for its negative effects, DHs scored high points in the aggravation of salary increase, whereas dentists scored high points in the aggravation of salary increase. Regarding expandable professional tasks after the inclusion of DHs in the category of medical personnel, the management of independent periodontal care programs recorded the highest percentage both in DHs and dentists. These findings highlight the need for adequate discussions about the meanings of the inclusion of DHs in the category of medical personnel and will hopefully contribute to the rational adjustment and legalization of DHs' works with regard to their inclusion in the category of medical personnel.