• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.70-72
• /
• 2009

본 논문에서는 일반적인 단상유도기의 권선 배치를 가지는 경우, 즉 주권선과 보조권선의 배치가 임의의 각을 가지는 경우에 대하여 등가회로를 구성하였다. 이때, 등가회로를 이용하여 최적 효율 확보 방법으로 평형 운전 및 고정자 동손 최소화를 적용하였다. 설계된 전동기에 대해 2차원 유한요소해석을 수행함으로써 비직교 권선 분포 설계 시 자기적 평형상태와 이로 인한 철손 및 회전자 저항손 저감 및 효율 개선 효과를 검증하였다.

• Journal of Industrial Technology
• /
• v.22 no.B
• /
• pp.155-161
• /
• 2002

As the wireless communications are gradually developed, the higher frequency is demanded and the smaller the size of antenna shall be reduced by the wavelength of the operating frequency. However, the smaller the size of antenna becomes, the less the gain is obtained according to the frequency, so that a new attempt such as an array antenna has been examined to improve the characteristics. Also, for the convenience of communication, the omni-directional property is required. In this paper, two antennas system which is aligned in cross direction in tested and analyzed. The main scope is focused to get an appropriated distance between the two small antennas to get better properties. There are various ways of array arrangement, but in this study, it should be placed on the same PCB for easy implementation and the direction of each antenna are aligned to be a cross($90^{\circ}$) position. The study is carried out by comparing the radiation patterns mainly, and the theoretical expectation and the computer simulation are also executed. The final model is the folded IF-antennas system printed on PCB and the ideal dipole-antenna arrangement in also test to verify the possibility of our implementation. And it is finally proved by measuring experiments.

• Composites Research
• /
• v.13 no.5
• /
• pp.37-43
• /
• 2000

In this paper an analytical investigation pertaining to the elastic shear buckling behavior of transversely stiffened orthotropic plate under in-plane shear forces is presented. All edges of plate are assumed to be simply supported and the evenly placed stiffener is considered as a beam element neglecting its torsional rigidity. For the solution of the problem Rayleigh-Ritz method is employed. Using the derived equation, the limit of buckling stress of transversely stiffened plate is suggested as a graphical form. Based on the limit of buckling stress of stiffened plate, graphical form of results for finding the required stiffener rigidity is presented when one and two stiffeners are located, respectively.

• Communications for Statistical Applications and Methods
• /
• v.15 no.2
• /
• pp.235-244
• /
• 2008

Balanced arrays which are generalized orthogonal arrays, introduced by Chakravarti (1956) can be used to construct the fractional factorial designs. Especially for 2-level factorials, balanced arrays with strength 4 are identical to the resolution-V fractional designs. In this paper criteria for evaluation the degree of the orthogonality of balanced arrays of 2-levels with strength 4 are developed and some application methods of the suggested criteria are discussed. As a result, in this paper, we introduce the constructing methods of near orthogonal saturated balanced resolution-V fractional 2-level factorial designs.

• Proceedings of the Korean Statistical Society Conference
• /
• 2005.11a
• /
• pp.5-11
• /
• 2005

본 연구에서는 최근에 널리 사용되고 있는 R 프로그램을 이용하여 실험계획법 중 요인배치법과 반응표면분석을 구현하였다. 특히 반응표면분석에서 직교계획, 회전계획, 기울기 회전계획을 만족하는 실험계획을 제공함으로써 상업용 프로그램의 미진한 부분을 개선하여 실험선택의 폭을 넓게 하였다.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.150-156
• /
• 2007

In this paper, we focus on the fault detection and isolation(FDI) method for inertial navigation system with three two-degree of freedom dynamically tuned gyros(DTG) on orthogonal sensor configuration. we propose the FDI method which can detect the fault of each DTGs rather than the fault of each sensing axis. The proposed FDI method is separated into two FDI modules according to the fault magnitude in order to improve the reliability of fault detection information. For large fault detection, only instantaneous DTG measurement is used to detect a fault DTG within a short time. For small fault detection, the integrated value of DTG measurements are used to detect a fault DTG. It takes a more time to detect a fault but it serves more reliable fault detection information. Using the proposed FDI method with consideration of DTG fault characteristic, we could find out a fault DTG successfully.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.345-352
• /
• 2006

The purpose of this paper is to evaluate the efficiency of two yard layout of HSS at container terminal, one is that the container yard blocks are placed horizontally in parallel with berth, the other is that the yard blocks are arranged vertically in perpendicular to the berth. In stevedoring system of container terminal, stacking and transport performance are influenced according to block arrangement type of yard. Therefore, efficient design that can improve stacking and transport performance is required. In this paper, we compared their efficiency of two block arrangement concepts in terms of storage capacity, productivity, facility investments, truck service level.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.891-897
• /
• 2018

In this paper, we propose a blind estimation scheme for the antenna spacing of nonuniform linear array MIMO radar using distributed electronic sensors based on ESPRIT. We present a blind method to separate orthogonal waveforms of a MIMO radar based on the antenna spacing estimation. The estimated orthogonal waveforms of a MIMO radar can be used for disabling opponent MIMO radars.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.2
• /
• pp.161-170
• /
• 2007

In this study, to improve on the inaccurate results of the orthotropic plate analysis, we aim to propose a modified coefficient of the orthotropic flexural rigidity for stiffened plates with rectangular ribs considering the dimensions of ribs. The sensitivity of the flexural rigidity and the maximum displacement according to the dimensions of stiffened plates were analyzed and the parametric study on the modified coefficient of the orthotropic flexural rigidity of stiffened plates was performed. The results show that the ratio of modified coefficients can be expressed as a function for each rib height, space and thickness regardless of plate thickness and the modified flexural rigidity can be easily estimated from the ratio functions of modified coefficients. The application of the coefficient function to various types of stiffened plates with different boundary conditions, aspect ratios, rib arrangement and loading size shows that the proposed function improves the accuracy of the orthotropic plate analysis compared with the results of the reference. Therefore, the orthotropic plate analysis of stiffened plates with rectangular ribs can easily achieve more accurate results using the coefficient function proposed in this study.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.111-116
• /
• 2015

This article considers a model of cooperative spectrum sharing between primary and secondary systems in which transmission occurs in two phases. In this scheme, we introduce that a single secondary transmitter, ST, employs a quadrature-phase-based signal to present the secondary message, while the primary message is presented by an in-phase-based signal. This allows simultaneous spectrum sharing without mutual interference. Therefore, an interference constraint is not necessary to protect primary operating performance from being degraded by the secondary user operations. Theoretical analysis and Simulations are then provided to confirm the superiority of the proposed scheme over the the current conventional methods.