• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.264-269
• /
• 2014

The aim of this study was to determine the current distribution area of Robinia pseudoacacia habitat and to estimate its stand yield as well as its carbon stocks. In order to do so, the area of R. pseudoacacia distribution is obtained based on the large-scaled forest type map (1:5,000). Also, Weibull diameter distribution model is used to predict the yield of R. pseudoacacia stands. In addition, carbon emission factor is applied to calculate carbon stocks and removals. To obtain the stand yield of R. pseudoacacia, we developed estimation equation considering growth factors of the stand, e.g. mean diameter, the basal area, maximum and minimun diameter and etc. and tested it to ensure accuracy. Consequently, estimation equation derived from all growth factors have shown significance that could also be used for analysis. Site index was also established to determine the productivity of the forestland that later turned out to be ranging from 16 to 22. Based on these results, stand yield tables were drawn up. R. pseudoacacia is widely distributed in inland areas of Gyeongsang, Chungcheong and Gyeonggi provinces which covers total area of 26,770 ha. And when it is converted into carbon stocks, it amounts to 2,517,598tC with annual carbon uptake of 3.76tC/ha which is comparable to Querqus species that is known to storer large amounts of carbon. Therefore, R. pseudoacacia is also expected to serve as a viable carbon pool that would contribute to the mitigation of climate change. Furthermore, stand yield tables, an outcome of this survey would assist not only in proper management but also in sustainable management policy of R. pseudoacacia.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.87-95
• /
• 2002

원주의 항력 감소와 원주 주위 유동의 제어에 대하여 실험적으로 연구하였다. 원주 주위 유동을 제어하기 위하여 작은 제어봉을 원주 전방에 설치하였다. 실험시 원주 직경(D=30mm)에 기초한 레이놀즈수는 $Re=2 {/times} 10^4$이었다. 제어봉의 직경(d)은 4mm, 5mm, 6mm, 7mm로 변화시켰으며, 원주와 제어봉 사이의 거리(L)를 조절하면서 원주의 표면압력분포와 후류속도를 측정하였다. 제어봉으로부터의 와 유출이 사라지는 임계거리 (critical distance) $ L_C$는 $ L_C$ /D=1.5+0.83d이었는데, $ L_C$를 전후로 유동특성과 항력값이 크게 바뀌었다. 특히 원주와 제어봉 사이의 거리가 임계거리보다 짧은 경우에는 항력이 감소하다가 $ L_C$보다 크게 되면 증가하는 경향을 보였다. 제어봉의 직경이 d/D=0.233인 경우, L/D=2.013의 조건에서 원주는 약 29%의 항력 감소를 보였고, 전체 항력은 L/D=1.833조건에서 약 25% 항력이 감소하였다.

• Journal of Power System Engineering
• /
• v.11 no.2
• /
• pp.26-31
• /
• 2007

통신용 전자기기에서 대부분의 열은 증폭기에서 발생한다. 일반적으로 증폭기를 냉각하기 위하여 공랭식을 사용하여 발생하는 많은 열을 냉각하였다. 그러나 전통적인 방법은 고성능 콤팩트화 되어가는 추세에서 발열되는 열을 충분히 냉각하기는 부족하다. 본 논문은 고발열 전자부품 냉각을 위해서 수냉식 방법을 사용하였다. 열전달 효율을 높이기 위하여 냉각판에 직접 냉각수를 흐르게하여 접촉저항을 줄였다. 그리고 냉각판의 유로에 대한 배열과 유량의 비의 효과를 조사하였다. 연구를 수행한 결과, 다음과 같은 결론을 얻을 수 있었다. 냉각수 순환량이 $3{\iota}/min$인 경우, 유로 직경이 8 mm일 때의 냉각 성능이 10 mm일 때보다 우수한 것으로 나타났다. 냉각수 순환량이 $3{\iota}/min$인 경우, 유로 직경이 8 mm일 때의 발열 소자 표면 온도 분포가 더욱 안정적으로 나타났으며, 상하부에 설치된 발열 소자 표면 온도가 더 낮게 나타났다. 동일한 유로 직경의 냉각판에서, 열유속 증가에 따른 냉각수의 전열 성능 증가로 인해 전체 발열량의 증가율보다 발열 소자의 온도 증가율이 낮게 나타났다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.297-301
• /
• 2007

The blades of supersonic turbines with low aspect ratio are usually designed to have the same cross sectional shape in radial direction. The profile diameter definition of turbines may lead to produce unintended flow passage area variations resulting performance degradation. In this paper, the effects of profile diameter definition on the supersonic impulse turbine performance have been investigated. Computational results of three different profile diameters are compared. It has been found that flow passage area variation can be achieved according to designer's intention when blade profile is defined at rotor tip diameter. Furthermore, the turbine blade profile defined at rotor tip showed better performance than the others.

• Korean Journal of Optics and Photonics
• /
• v.5 no.2
• /
• pp.298-303
• /
• 1994

Microlens arrays are fabricated by melting "islands" of thick photoresist on a glass substrate. Microlenses with diameters $25\mu\textrm{m}$, $50\mu\textrm{m}$, $100\mu\textrm{m}$are made. Their surface profiles are obtained by a scanning electron microscope and a mechanical surface profilometer. The wavefront of the microlenses is measured by phase-shifting techniques using a Mach-Zehnder-like configuration. Thereby wavefront errors, focal lengths. point spread functions are obtained. The microlens with the diameter of $100\mu\textrm{m}$ has focal length of $164\mu\textrm{m}$ and spot diameter is less than $5\mu\textrm{m}$..

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.55-64
• /
• 1998

Using blind hole drilling method the residual stresses and welding deflections are measured for the cylindrical shell with various heat inputs and cylinder diameters. As a result, it is verified that the axial and hoop residual stresses which are generated near the weld part of cylinders are increased, as the heat inputs and cylinder diameters are increased. And experimental results show good agreements with those of precedent researchers. In this paper, it is validated that dominant parameters, heat input Q and the dimension of cylinder h/D have some effects on the magnitude and distribution of axial and hoop residual stresses and welding deflections. The empirical equations of residual stresses and welding deflections are made by using multiple linear regression with experimental results.

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.52-59
• /
• 1985

This study was carried out to compare the diameter increment of Pinus densiflora for.erecta, Pinus koraiensis, Larix leptolepis, Abies holophylla and Abies koreana growing in middle area of Korea. The results obtained were summarized as follows; 1) The difference in annual diameter increment among five species according to D.B.H classes showed to be the strongest in Pinus koraiensis the second rank Larix leptolepis, the third rank Pinus densiflora erecta, the fourth rank Abies holophylla and the weakest in Abies koreana. 2) It was inferred that when the D.B.H of Pinus densiflora for.erecta comes to 95cm, Pinus koraiensis 80cm, Larix leptolepis 80cm, Abies holophylla 140cm and Abies koreana 85cm respectively, their diameter do not increase. 3) Total D.B.H increment among five species according to tree age classes were ranked as follows; Larix leptolepis, Pinus koraiensis, Pinus derasiflora for.erecta, Abies holophylla and Abies koreana. 4) It was inferred that when the age of Pinus densiflora for.erecta comes to 200yrs, Pinus koraiensis 120yrs, Larix leptolepis 120yrs, Abies holophylla 260yrs and Abies koreana 300yrs respectively, their diameter do not increase. 5) Abies koreana showed the lowest diameter increment in comparison with other four species, while diameter increment in Abies holophylla and Abies koreana decreased in later age than other species.

• Journal of agriculture & life science
• /
• v.43 no.3
• /
• pp.7-14
• /
• 2009

Some results of the 5th Korean National Forest Inventory Program measured in 2007 were used to analyze annual diameter growth characteristics for major tree species distributed in Chungnam province. A total of 717 sample trees from 49 plots distributed in Chungnam province were measured and analyzed for annual diameter growth characteristics. As stand age and stand density increased, annual diameter growth rates for major species tended to decrease. The species of Prunus sargentii(2.14mm/yr) showed the best annual diameter growth rates and the others are Quercus serrata(2.10mm/yr), Pinus thunbergii(2.03mm/yr), Pinus densiflora(1.91mm/yr), and Castanea crenata(1.90mm/yr) in order. This information could be very useful to understand annual diameter growth characteristics for major species distributed in Chungnam province.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.850-853
• /
• 2008

송수관이나 배수관은 계획된 필요유량을 특정 지점까지 안전하게 전달할 수 있도록 설계되지만 여러 가지원인으로 인하여 갑작스런 파열이나 균열이 일어난다. 파이프 파괴의 원인으로는 수격현상, 관의노화, 파이프 외부로부터의 충격, 흙의 상태, 그리고 파이프 설치시의 공사여건 등이 있다. 본 연구에서 여러 가지 요인들을 불확실성 인자로 가정하여 파이프의 파괴확률을 산정할 수 있는 신뢰성 해석 모형이 개발되었다. 상수관망의 설계 시 파이프의 두께를 산정하는 주 장력 공식을 이용하여 신뢰함수를 만들고 파이프의 파괴확률을 계산하였다. 신뢰함수를 구성하는 확률변수들 중 파이프의 내압에 대한 분포함수는 정규분포가 아닌 극치분포(Gumbel distribution)를 따른다는 것을 부정류 수치해석 결과로서 알 수 있었고 AFDA(Approximate Full Distribution Approach) 기법을 사용하여 파괴확률을 산정하였다. 신뢰성 모형을 이용하여 파이프의 두께, 직경, 허용응력, 그리고 파이프 내압에 따른 파괴확률을 정량적으로 산정할 수 있었다. 본 연구에서 개발된 신뢰성 해석모형을 이용하여 보다 안전하고 경제적인 송배수관의 설계기법을 구축할 수 있을 것이다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.7-15
• /
• 2019

Purpose: The purpose of this study is to evaluate beam delivery accuracy for small sized lung SBRT through experiment. In order to assess the accuracy, Eclipse TPS(Treatment planning system) equipped Acuros XB and radiochromic film were used for the dose distribution. Comparing calculated and measured dose distribution, evaluated the margin for PTV(Planning target volume) in lung tissue. Materials and Methods : Acquiring CT images for Rando phantom, planned virtual target volume by size(diameter 2, 3, 4, 5 cm) in right lung. All plans were normalized to the target Volume=prescribed 95 % with 6MV FFF VMAT 2 Arc. To compare with calculated and measured dose distribution, film was inserted in rando phantom and irradiated in axial direction. The indexes of evaluation are percentage difference(%Diff) for absolute dose, RMSE(Root-mean-square-error) value for relative dose, coverage ratio and average dose in PTV. Results: The maximum difference at center point was -4.65 % in diameter 2 cm size. And the RMSE value between the calculated and measured off-axis dose distribution indicated that the measured dose distribution in diameter 2 cm was different from calculated and inaccurate compare to diameter 5 cm. In addition, Distance prescribed 95 % dose($D_{95}$) in diameter 2 cm was not covered in PTV and average dose value was lowest in all sizes. Conclusion: This study demonstrated that small sized PTV was not enough covered with prescribed dose in low density lung tissue. All indexes of experimental results in diameter 2 cm were much different from other sizes. It is showed that minimized PTV is not accurate and affects the results of radiation therapy. It is considered that extended margin at small PTV in low density lung tissue for enhancing target center dose is necessary and don't need to constraint Maximum dose in optimization.