• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.88-98
• /
• 2024

In this paper, an Automatic Terrain Following (ATF) Simulator using Digital Terrain Elevation Data (DTED) was proposed. This ATF Simulator consists of a Flight Simulator, a Radar Simulator, and a Terrain Following Computer (TFC) Simulator. DTED and radar scan data generated with DTED were used as the terrain information necessary for terrain following. The ATF Simulator provides three modes of operation: a passive mode that uses DTED, an active mode that uses radar scan data, and a hybrid mode that uses both. We developed an ATF Simulator that could reduce the cost and time required to develop a terrain following system using the LabVIEW development environment and the MATLAB App Designer development environment. It was verified by confirming that the ATF Simulator met all functional requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.979-987
• /
• 2012

This paper implements and integrates algorithms for terrain following of UCAVs (Unmanned Combat Aerial Vehicles): trajectory generation, guidance, and navigation. Terrain following is very important for UCAVs because they perform very dangerous missions such as Suppression of Enemy Air Defences while the terrain following can improve the survivability of UCAVs against from the air defence systems of the enemy. To deal with the GPS jamming, terrain referenced navigation based on nonlinear filter is chosen. For the trajectory generation, Voronoi diagram is adopted to generate horizontal plane path to avoid the air defense system. Cubic spline method is used to generate vertical plane path to prevent collisions with ground while flying sufficiently close to surface. Follow-the-Carrot and pure pursuit tracking methods, which are look-ahead point based guidance algorithms, are applied for the guidance. Numerical simulation is performed to verify the performance of the integrated terrain following algorithm.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.1
• /
• pp.51-56
• /
• 2013

In order to apply a biped robot in real world, the robot requires a robust walking and a function of localization, path planning and navigation. Recently, localization and path planning using RFID of mobile robot has been studying. However, when the biped robot walks, it has unstability and tends to leave the path. In the paper we propose a method of walking stabilization using FSR(Force Sensing Resistor), Gyro and accelerometer for the real biped robot. Also a path tracking algorithm using RFID sensor attached in robot's foot is proposed based on localization of the robot. The proposed algorithm is verified from walking experiments using real biped robot on uneven terrain and path tracking experiments on the RFID environments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.618-626
• /
• 2011

In order to complete missions in a complicated terrain or highly dangerous area, an unmanned aerial vehicle(UAV) needs a fine controller to precisely follow the desired path. A PID controller used for the path following feeds forward path curvature information to the control input to improve the path following performance. High gain for PID controller is necessary to follow path tightly. However the high gain could cause instability or performance degradation when the vehicle has slow dynamics. We present PID controller design method which considers response delay of vehicle as well as path curvature. In order to obtain path curvature the desired path is described as a 3rd order polynomial by applying cubic spline interpolation. We apply the proposed controller to the path following of a UAV which is operated in high altitude and has very slow lateral dynamics. The lateral dynamics are modelled as a first order delayed system in the controller design. Nonlinear simulation shows the UAV with proposed controller follows an arbitrary path very tightly.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1041-1042
• /
• 2023

본 논문에서는 고르지 않은 도로에서 사용자를 인식하고 따라다니며, 적재물을 안정적으로 운반하는 로봇을 제안합니다. 기존의 바퀴 구동 방식은 계단이나 울퉁불퉁한 지형에 부딪혔을 때 주행이 제한적입니다. 이를 해결하기 위해 저희는 로커-보기(rocker-bogie) 메커니즘을 적용했습니다. 비전을 통해 사용자를 특정하고, 크기에 따라 속도를 조절하며 추종합니다. 라이다는 주변의 장애물을 감지, 회피, 주행하는 데 사용되었으며, 가속도센서와 리니어 모터를 사용하여 밸런싱 기능을 구현했습니다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.140-146
• /
• 1995

In case the uncertainty existing in a system is assumed to satisfy the matching condition and to be come-bounded. Y. H. Chen proposed an adaptive robust control algorithm which introduced adaptive sheme for a design parameter into robust deterministic controls. In this paper, the adaptive robust control algorithm is applied to the position tracking control of direct drive robots, and simulation and experimental studies are conducted to evaluate control performance.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.1-7
• /
• 2022

A simulated radar terrain scan data generation method is employed for terrain following. This method scans the discrete terrain by sequentially radiating beams from the radar to the desired scan area with the same azimuth but varying elevation angles. The terrain data collected from the beam is integrated to generate the simulated radar terrain scan data, which comprises radar-detected points. However, these points can be located far from the beam centerline when the radar is far from them due to beam divergence. This paper proposes a geometry-based terrain scan data generation method for analysing simulated radar terrain scan data. The method involves detecting geometric points along the beam centerline, which forms the geometry-based terrain scan data. The analysis of the simulated radar terrain scan data utilising this method confirms that the beam width effects are accounted for in the results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.4
• /
• pp.495-506
• /
• 2024

In this study, we propose the terrain following algorithm using model predictive control and nonlinear disturbance observer-based backstepping sliding mode controller for an aircraft system. Terrain following is important for military missions because it helps the aircraft avoid detection by the enemy radar. The model predictive control is used to replace the generating trajectory and guidance with the flight path angle constraint. In addition, the aircraft is affected to the parameter uncertainty and unknown disturbance such as wind near the mountainous terrain. Therefore, we suggest the nonlinear disturbance-based backstepping sliding mode control method for the aircraft that has highly nonlinearity to enhance flight path angle tracking performance. Through the numerical simulation, the proposed method showed the better tracking performance than the traditional backstepping method. Furthermore, the proposed method presented the terrain following maneuver maintaining the desired altitude.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.273-274
• /
• 2011

최근에는 풍속변화에 대응하여 최대전력을 발생할 수 있는 가변속 풍력발전 시스템에 대한 연구가 활발히 진행 중이며 국내의 지형적 조건에 따른 바람의 영향으로 풍력발전 시스템의 MPPT제어가 반드시 필요하다. 종래의 풍력발전 MPPT 제어는 풍속변화에 대한 응답속도 등에 대한 문제점이 나타난다. 따라서 본 논문에서는 파라미터 변동에 대해 강인성 제어가 가능한 FLC(Fuzzy Logic Control)을 기반으로 한 풍력발전시스템의 MPPT 제어를 제안하고, 시뮬레이션 결과를 통하여 타당성을 입증한다.

• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.105-115
• /
• 2002

For many rears, traffic accident statistics are the most direct measure of safety for a signalized intersection. However it takes more than 2 or 3 yearn to collect certain accident data for adequate sample sizes. And the accident data itself is unreliable because of the difference between accident data recorded and accident that is actually occurred. Therefore, it is rather difficult to evaluate safety for a intersection by using accident data. For these reasons, traffic conflict technique(TCT) was developed as a buick and accurate counter-measure of safety for a intersection. However, the collected conflict data is not always reliable because there is absence of clear criteria for conflict. This study developed objective and accurate conflict criteria, which is shown below based on traffic engineering theory. Frist, the rear-end conflict is regarded, when the following vehicle takes evasive maneuver against the first vehicle within a certain distance, according to car-following theory. Second, lane-change conflict is regarded when the following vehicle takes evasive maneuver against first vehicle which is changing its lane within the minimum stopping distance of the following vehicle. Third, cross and opposing-left turn conflicts are regarded when the vehicle which receives green sign takes evasive maneuver against the vehicle which lost its right-of-way crossing a intersection. As a result of correlation analysis between conflict and accident, it is verified that the suggested conflict criteria in this study ave applicable. And it is proven that estimating safety evaluation for a intersection with conflict data is possible, according to the regression analysis preformed between accident and conflict, EPDO accident and conflict. Adopting the conflict criteria suggested in this study would be both quick and accurate method for diagnosing safety and operational deficiencies and for evaluation improvements at intersections. Further research is required to refine the suggested conflict criteria to extend its application. In addition, it is necessary to develope other types of conflict criteria, not included in this study, in later study.