• Title/Summary/Keyword: 지표조도모형

Search Result 18, Processing Time 0.026 seconds

A Study on Development and Utilization of Wind Hazard Maps (강풍위해지도 개발 및 활용 방안에 관한 연구)

  • Lee, Young-Kyu;Lee, Sung-Su;Ham, Hee-Jung
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.11 no.3
    • /
    • pp.1-8
    • /
    • 2011
  • In this study, a wind hazard map over Korea peninsula based on geographical information is developed, which consists of the surface roughness model, the topographical effect model and the homogeneous wind model. The surface roughness model is assessed to evaluate the effect of the surface roughness on the wind field near ground. The topographical effect model is assessed to quantify the effect of the speed-up caused by topology, which is calculated by adopting the topographical effect factor in Korea building code (2005). The homogeneous wind map is created either by a frequency analysis method for meteorological data or a typhoon simulation. The results show that the wind hazard map can be applied to the determination of insurance premium as well as the assessment of loss and damage.

Parameter estimation of unsteady flow model using mulit-objective optimization and minimax regret approach (다목적최적화와 최소최대 후회도 방법에 의한 부정류 계산모형의 매개변수 추정)

  • Li, Li;Chung, Eun-Sung;Jun, Kyung Soo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.310-310
    • /
    • 2017
  • 홍수추적 모형의 적절성을 결정하는 중요한 요소 중 하나는 모형의 매개변수이다. 특히 자연하천에 관한 부정류 계산모형의 매개변수인 조도계수는 하상재료의 특성에 따라 좌우되는 표피마찰뿐만 아니라 하상의 굴곡 등 단면형의 변화에 따른 형상손실 및 하천의 사행에 따른 손실 효과 등을 포괄적으로 내포하고 있기 때문에 모든 하천구간에 대하여 일반적으로 적용할 수 있는 조도계수의 값을 하나로 결정하기는 어렵다. 또한 조도계수는 흐름조건, 즉 유량 또는 수위의 변화에 따른 가변성을 갖고 있기 때문에, 흐름이 시간 및 공간적으로 변화하는 부정류 계산모형에 있어서는 더욱 그러하다. 그러므로 본 연구에서는 조도계수의 가변성과 다수 지점의 관측치를 고려한 모형보정의 결과로부터 얻은 파레토 최적화와 최소최대 후회도 방법(Minimax regret approach, MRA)을 결합하여 부정류 계산모형의 안정적인 매개변수를 선정할 수 있는 방법을 제안하였다. 여러 지점의 관측치를 고려한 모형의 보정은 다목적 최적화 문제로서, 여러 지점에 대한 가중치를 결합하여 얻은 하나의 목적함수에 대하여 여러 번의 개별 최적화를 수행함으로써 다수의 파레토 최적해들을 구할 수 있는 통합접근법을 적용하였다. 이때 유량에 따른 조도계수의 가변성을 나타내는 두 개의 매개변수로 구성된 관계식을 이용하여 두 구간에 대한 매개변수들을 모형의 추정 대상 매개변수로서 최적화하였다. 이 후 각기 다른 홍수사상에 대해 보정과 검증을 수행하였으며 각각에 대한 평가지표의 후회도를 정량화하였고 최종 안정적인 매개변수를 추정하기 위해 MRA를 이용하여 종합적인 순위를 도출하였다. MRA는 완전히 불확실한 의사결정 상황에서 유용한 방법으로 알려져 있는데 가장 나쁜 순위가 가장 좋은 것을 선택할 수 있게 하는 보수적인 의사결정기법이다. 계산결과 추정된 모형의 가변조도계수와 그로부터 얻은 두 개 지점에서의 평가지표인 RMSE는 두 지점에 대한 가중치의 조합에 따라 선택되는 매개변수 값에 따라 달라짐을 알 수 있었다. 본 연구에서 제시한 방법은 수문 및 수리모형의 다수의 관측지점의 자료를 이용한 매개변수 산정문제에 있어서 안정적인 해를 도출할 수 있다.

  • PDF

Research on estimating roughness coefficient for 1-D hydraulic model using river flow measurement data and water surface slope (실측자료와 수면경사를 활용한 1차원 수리모형의 조도계수 산정 연구)

  • Seong Jun Kim;Chang Sung Kim;Geunsoo Son;Sunghyun Kwak;;;Hong Koo Yeo
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.290-290
    • /
    • 2023
  • 하천의 조도계수는 하천의 수리특성을 나타내는 대표적인 지표로써 수리모형의 모의를 수행하는데 중요한 매개변수 중 하나이다. 하지만 현재 수리모형의 조도계수는 하천정비기본계획시에 수립된 하나의 조도계수를 사용하여 모의를 수행하고 있어 유량 또는 수위에 따라 동일한 조도계수를 적용하게 되면 수위를 과대 또는 과소 모의 할 수 있는 문제가 있다. 따라서 다양한 유량 조건에 따른 모의결과의 신뢰성을 확보하기 위해서는 유량 규모에 따른 조도계수를 산정하여 검토할 필요가 있다. 이에 본 연구는 삼례교를 대상으로 하였으며, 실측된 유량자료를 활용하여 유량 또는 수위에 따른 조도계수를 산정하였고 HEC-RAS 모의 결과와 비교하였다. 분석결과, 삼례교 지점의 경우 일반적으로 수위가 증가할 수록 조도계수가 감소하다가 일정한 경향을 보이는 것과 상이하게 수위가 증가할수록 조도계수가 증가하는 경향을 보였다. 이는 하천 내에 관목이 형성되어있어 조도계수가 증가한 것으로 판단된다. 추후, 다양한 지점을 대상으로 분석을 통해 환경부 등 하천 관련 사업과 하천기본계획 수립 시 조도계수 표준화를 통한 합리적 설계에 기여할 수 있을 것으로 기대된다.

  • PDF

Suggestion of a simple vegetation parameter aggregation method applicable to a distributed Rainfall-Runoff model (분포형 강우-유출 모형에 적용 가능한 식생 매개변수의 공간 스케일 확장 기법의 제시)

  • Lee, Kh;Kang, Bs
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2005.05b
    • /
    • pp.60-64
    • /
    • 2005
  • 강우-유출 모형을 수행하기 위해서는 지표면의 성질을 나타내는 보조 자료로서 식생피복자료, 토양분포, DEM 등이 주어지는데, 이러한 인자들이 흐름을 지배하게 되므로 중요하다. 그러므로 강우-유출 모형에서는 지표에서의 식생을 적절하게 나타내 줄 필요가 있는데, 최근의 원격 탐사 기술이 하나의 대안으로 제시되어 왔으며 식생 정보는 2차원 디지털 지도로 작성되어 수치모형에서는 이 디지털지도로부터 조도계수의 값을 전환하는 다단계 방법을 이용하여 오고 있다. 그러나 강우-유출 모형의 격자 간격이 식생 피복을 나타내기 위한 디지털 지도의 격자 간격과 항상 일치하는 것이 아니고 디지털 지도의 격자 간격이 일반적으로 더 세밀하므로 강우-유출 모형에서 디지털 지도를 이용하기 위해서는 적당한 방법의 스케일 확장 (up-scaling)이 필요하며, 이 연구에서는 질량 보존의 법칙을 사용하여 이론적 기반에 근거한 하나의 전략적인 방법이 제시된다. 이 연구의 목적은 강우-유출 모형의 수행 시 이질성을 보이는 지표면에서 식생과 관련된 매개변수를 통합/확장 처리하는 하나의 기법을 대기모형에서 이미 제시된 방법을 모사하여 제시함으로써 이질성을 보이는 지표면의 처리할 때 방향을 설정해 주고자함이다.

  • PDF

A Study on the Variation of Roughness Coefficient According to the Flow Rate through Hydraulic Experiment and Numerical Simulation (수리 실험과 수치 모의를 통한 유량 규모에 따른 조도계수의 변화에 관한 연구)

  • Lee, Nam-joo;Kang, Taeuk;Kim, Yerim
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.279-283
    • /
    • 2018
  • 하천의 조도계수는 흐름에 대한 하도의 저항 정도를 표시하는 지표로서, 하천의 다양한 수리 계산을 실시할 때 가장 중요한 기본 자료 중 하나이다. 이러한 조도계수는 하도의 형상, 하상 재료, 유량의 크기 등에 의해 영향을 받는다. 본 연구에서는 하천의 유량 규모에 따른 조도계수의 변화 정도를 수리 실험과 수치 모의를 통해 간접적으로 검토하였다. 유량 조건별 수리 실험은 한국건설기술연구원의 하천실험센터 내 직선 수로에서 수행하였고, 수치 모의는 HEC-RAS를 이용하였다. 유량 조건은 하천실험센터의 펌프 가동의 정도를 고려하여 5개로 구분하였고, 각각의 유량 조건에 대하여 유량을 실측하였다. 실측에 따른 유량의 규모는 $0.23{\sim}1.91m^3/s$로 나타났다. 각각의 유량 조건에 대하여 수치 모의의 검증을 위해 6개 지점에서 수위표와 초음파 수위계를 이용하여 수위를 계측하였고, 이 가운데 최하류 지점의 수위는 HEC-RAS 모형의 하류단 경계조건으로 이용하였다. 실험 하도 구간의 총 연장은 372 m 이고, 횡단구조물이 없는 지점을 제외하면 대부분 20 m 간격으로 총 21개의 하천 단면을 입력하여 HEC-RAS를 구성하였다. 각각의 유량 조건에 대한 수치 모의 모형은 5개 수위 계측 지점의 수위 오차가 최소화되도록 조도계수를 변화시켜 보정되었다. 그 결과, 각각의 유량 조건에 대한 수치 모의 결과의 평균 오차는 0.01~0.02 m로 계산치와 관측치가 매우 근사하였다. 결정된 조도계수는 0.041~0.075의 범위를 가지는 것으로 분석되었고, 유량의 증가에 따라 큰 폭으로 감소하다가 특정한 값에 수렴하는 것으로 검토되었다.

  • PDF

A Modified grid-based KIneMatic wave STOrm Runoff Model (ModKIMSTORM) (I) - Theory and Model - (격자기반 운동파 강우유출모형 KIMSTORM의 개선(I) - 이론 및 모형 -)

  • Jung, In Kyun;Lee, Mi Seon;Park, Jong Yoon;Kim, Seong Joon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.28 no.6B
    • /
    • pp.697-707
    • /
    • 2008
  • The grid-based KIneMatic wave STOrm Runoff Model (KIMSTORM) by Kim (1998) predicts the temporal variation and spatial distribution of overland flow, subsurface flow and stream flow in a watershed. The model programmed with C++ language on Unix operating system adopts single flowpath algorithm for water balance simulation of flow at each grid element. In this study, we attempted to improve the model by converting the code into FORTRAN 90 on MS Windows operating system and named as ModKIMSTORM. The improved functions are the addition of GAML (Green-Ampt & Mein-Larson) infiltration model, control of paddy runoff rate by flow depth and Manning's roughness coefficient, addition of baseflow layer, treatment of both spatial and point rainfall data, development of the pre- and post-processor, and development of automatic model evaluation function using five evaluation criteria (Pearson's coefficient of determination, Nash and Sutcliffe model efficiency, the deviation of runoff volume, relative error of the peak runoff rate, and absolute error of the time to peak runoff). The modified model adopts Shell Sort algorithm to enhance the computational performance. Input data formats are accepted as raster and MS Excel, and model outputs viz. soil moisture, discharge, flow depth and velocity are generated as BSQ, ASCII grid, binary grid and raster formats.

Estimation of Local Surface Temperature from EBM with the Use of GRID/GIS and Remote Sensed data (GRID/GIS 및 RS 자료를 이용한 에너지 평형 모형으로부터의 국지적 지표 온도 산출)

  • 신선희;하경자;김재환;오현미;조명희
    • Korean Journal of Remote Sensing
    • /
    • v.20 no.2
    • /
    • pp.103-116
    • /
    • 2004
  • The mesoscale atmospheric models to produce surface temperature can not generally consider the effect of the sloped terrain for direct solar radiation. These have not showed the regional difference of solar radiation and as a result, have made the big error in the local surface temperature. Therefore, we wished to represent the exact locality of surface temperature by considering the geometric properties of surface as well as the vegetated properties of surface. The purpose of the study is to produce local surface ground temperature in sloped terrain diagnostically using surface Energy Balance Model (EBM) with the use of GRID model in Geographic Information Systems (GIS). In this study, surface inhomogeneity over southeastern part of Korean peninsula are considered in estimation of the absorbed surface solar radiation in terms of the illumination angle, depending on topographical aspect and slope in GRID. Also, the properties of vegetated surface which the major components for the variability of surface temperature are considered in terms of NDVI. The results of our study show the locally changes in the surface ground temperature due to local ground aspect and slope effect and local properties of vegetated surface. The more detailed distribution of local surface temperature may drive the local circulation at lower atmospheric and it may explain better the real local circulation.

Daylighting Performance of Interior Space with Differentiated Glazing Systems (가변 유리투과체로 구성된 실 내공간의 채광성능평가)

  • Jeong, In-Young;Kim, Jeong-Tai
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2004.11a
    • /
    • pp.63-68
    • /
    • 2004
  • 본 연구는 우리나라 유리건축에서 적용되고 있는 유리투과체를 조사하여 투과율이 다른 4종류 즉, 투명유리, 색유리, 파스텔유리, 로이유리를 선정하여 복층유리로 제작하였다. 투과체에 따른 실내공간의 채광성능평가를 위하여 축소모형을 1/10으로 제작하였으며, 투과체의 구성을 일반형과 이중분할형으로 구성하여 기준실과 실험실에 설치하였다. 또한, 채광성능평가시 IEA모니터링 프로토콜을 적용하여 작업면, 벽면, 천정면에 대하여 조도를 외부조도와 동시에 측정하였고, 본 논문에서는 작업면에 대한 채광성능평가를 중심으로 분석하였다. 평가지표로서 주광조도비를 사용하였으며, 일반형과 이중분할형에 대한 가변 유리투과체를 변화시켰을 경우 투과율에 따른 실내공간의 채광성능을 평가하였다. 가변 유리투과체로 구성된 실내공간의 채광성능평가는 다음과 같이 분석되었다. 첫째, 실내공간에 일반형을 적용하여 서로 다른 투광성능을 가진 유리투과체가 적용된 경우 외부조도에 대한 내부조도 비율은 투과율이 증가할수록 일정하게 증가하는 것으로 나타났다. 이는 투과체가 갖는 투과성능의 영향으로 판단된다. 둘째, 일반형에 비해 이중분할형은 채광창으로 유입되는 채광학적 기여가 증가하여 실 전체의 조도를 증가시키며 특히, 실 중간부와 후면부의 경우 채광적 잠재력이 증대되어 실의 쾌적함과 시 환경적 질이 증대될 것으로 사료된다. 현재 유리건축물에 많이 적용되고 있는 저 투과체에 이중분할형을 적용할 경우 채광학적으로 많은 효과가 있을 것으로 기대된다.

  • PDF

An Analysis of the Rainfall-Runoff of Natural Watershed Using the Hydraulic Routing Method (수리학적 추적 방법을 이용한 자연하천의 강우유출 해석)

  • Kwon, Hyun-Han;Moon, Young-Il
    • Journal of Korea Water Resources Association
    • /
    • v.38 no.7 s.156
    • /
    • pp.555-564
    • /
    • 2005
  • In this study, a simple rainfall-runoff model was proposed by using the hydraulic routing model that requires relatively few parameters. The parameters of this model were estimated by the watershed characteristics data, and were applied to the Soyang watershed and Ui stream watershed by using the kinematic wave for overland flow and dynamic wave routing for channel routing. In order to demonstrate validity, the proposed approach was compared to the HEC-1 model for the Soyang watershed. As the results of modeling have shown, the hydraulic model shows reasonable results similar to that of the HEC-1 model. This model also represents good results for the Ui stream watershed. Hence, even if this model is a simple rainfall-runoff model using general methodology, it is competitive to the natural watershed. However, it is still difficult to estimate the roughness coefficient and the catchment width, and therefore this model is in need of such supplements.