• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.417-426
• /
• 2006

Data acquisition is as important as data processing and interpretation in the field of marine geophysical exploration. Marine geophysicist, however, may not have enough information in this field because data acquisition method has been mainly developed by the commercial companies manufacturing the equipment. Therefore, the purpose of this paper is to introduce the general data acquisition method and information to help to construct the systematic and effective survey plan. When a survey plan is set up, the most important thing is to select the seismic equipment based on required penetration depth and resolution, and then construct the survey line intervals. Although a line interval varies from the research purposes, it should be narrower than the expected subsurface structures. Also, if 100% coverage of multibeam data is required, line intervals need to be adjusted based on the equipment characteristics. In case of merging with the preexisting dataset like bathymetry, gravity and magnetic, cross-over errors occurred at the each cross point should be removed to avoid any kinds of misinterpretation.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.191-205
• /
• 2009

To characterize the geological features in the study area for high-level radioactive waste disposal research, KAERI (Korea Atomic Energy Research Institute) has been performing several geological investigations such as geophysical surveys and borehole drillings since 1997. Especially, the KURT (KAERI Underground Research Tunnel) constructed to understand the deep geological environments in 2006. Recently, the deep boreholes, which have 500 m depth inside the left research module of the KURT and 1,000 m depth outside the KURT, were drilled to confirm and validate the results from a geological model. The objective of this research was to investigate hydrogeological conditions using a 3-D geological model around the KURT. The geological analysis from the surface and borehole investigations determined four important geologicla elements including subsurface weathered zone, low-angled fractures zone, fracture zones and bedrock for the geological model. In addition, the geometries of these elements were also calculated for the three-dimensional model. The results from 3-D geological model in this study will be beneficial to understand hydrogeological environment in the study area as an important part of high-level radioactive waste disposal technology.

• Economic and Environmental Geology
• /
• v.42 no.3
• /
• pp.273-282
• /
• 2009

To render more valuable information, a spatial database is being constructed from digitalized maps in the geographic areas. Transferring file-based maps into a spatial database, facilitates the integration of larger databases and information retrieval using database functions. Geological mapping is the graphical interpretation results of the geological phenomenon by geological surveyors, which is different from other thematic maps produced quantitatively. These features make it difficult to construct geologic databases needing geologic interpretation about various meanings. For those reasons, several organizations in the USA and Australia are suggesting the data model for the database construction. But, it is hard to adapt to a domestic environment because of the representation differences of geological phenomenon. This paper suggests the data model adaptive in domestic environment analyzing 1:50,000 scales of geologic maps and more detailed mine geologic maps. The suggested model is a logical data model for the ArcGIS GeoDatabase. Using the model it can be efficiently applicable in the 1:50,000 scales of geological maps. It is expected that the geologic data model suggested in this paper can be used for integrated use and efficient management of geologic maps.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.176-187
• /
• 2022

Due to recent mid-scale earthquakes in the Korean Peninsula, the Korean central and local governments are preparing new measures for earthquake hazard mitigation. Geological and geotechnical information is essential for earthquake hazard assessment. Thus, related data have been collected and assimilated as DBs by various national organizations. However, several problems arise when local governments intend to use this information to establish earthquake hazard mitigation measures. In the case of the geological information, small-scale geological maps make it difficult to acquire detailed information, whereas lithofacies and faults do not often match at the boundaries of large-scale geological maps. Significant geotechnical information is lost due to lack of digitalization. Present study proposes four policy plans for geological and geological information management. First, it is necessary to link industry-academictechnology fields to use the information that has already been or to be produced more efficiently and professionally. Second, local government regulations are required to be enacted and revised to accumulate a lot of geological and geotechnical information. Third an expert system should be prepared to improve the quality of the information. Fourth, it is necessary to establish a dedicated department and expand budget support for efficient information management.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.98-109
• /
• 2007

Over the last twenty years, farmers in Western Australia have begun to change land management practices to minimise the effects of salinity to agricultural land. A farm plan is often used as a guide to implement changes. Most plans are based on minimal data and an understanding of only surface water flow. Thus farm plans do not effectively address the processes that lead to land salinisation. A project at Broomehill in the south-west of Western Australia applied an approach using a large suite of geospatial data that measured surface and subsurface characteristics of the regolith. In addition, other data were acquired, such as information about the climate and the agricultural history. Fundamental to the approach was the collection of airborne geophysical data over the study area. This included radiometric data reflecting soils, magnetic data reflecting bedrock geology, and SALTMAP electromagnetic data reflecting regolith thickness and conductivity. When interpreted, these datasets added paddock-scale information of geology and hydrogeology to the other datasets, in order to make on-farm and in-paddock decisions relating directly to the mechanisms driving the salinising process. The location and design of surface-water management structures such as grade banks and seepage interceptor banks was significantly influenced by the information derived from the airborne geophysical data. To evaluate the effectiveness ofthis planning., one whole-farm plan has been monitored by the Department of Agriculture and the farmer since 1996. The implemented plan shows a positive cost-benefit ratio, and the farm is now in the top 5% of farms in its regional productivity benchmarking group. The main influence of the airborne geophysical data on the farm plan was on the location of earthworks and revegetation proposals. There had to be a hydrological or hydrogeological justification, based on the site-specific data, for any infrastructure proposal. This approach reduced the spatial density of proposed works compared to other farm plans not guided by site-specific hydrogeological information.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.106-106
• /
• 2010

오일샌드는 비투멘(bitumen), 물, 점토, 모래의 혼합체로 이루어진 비재래형 탄화수소 자원으로 세계적인 고유가 시대에 큰 관심을 받고 있는 석유자원 중 하나이다. 오일샌드는 대부분이 캐나다 앨버타주에 분포하고 있으며 주요 저류층으로는 아스바스카(Athabasca), 콜드레이크(Cold Lake) 지역의 멕머레이층(McMurray Formation), 클리어워터층(Clearwater Formation), 그랜드래피드층(Grand Rapid Formation)과 피스리버(Peace River) 지역의 블루스카이층(Bluesky Formation), 게팅층(Gathing Formation)이 있다. 오일샌드 저류층은 고생대 탄산염 기반암 위에 하성-에스츄어리에 이르는 다양한 퇴적환경에서 형성되어 매우 복잡한 지질특성이 나타난다. 오일샌드 저류층의 효율적인 개발을 위해서는 저류층의 복잡한 지질학적 특성의 이해가 반드시 필요하다. 본 연구에서 캐나다 오일샌드 시추코어 분석 DB, 물리검층 자료, 현장 및 현생 시추코어를 통하여 오일샌드 저류층의 지질특성화 정보의 도출을 시도하였다. 우선 캐나다 앨버타 전역에 분포하는 시추공의 기본 정보(표고, 위경도, 층서별 최상부 심도, 생산광구명, 광구개발업체)를 제공하는 AccuMap DB 프로그램을 이용하여 광역적인 오일샌드 저류층의 분포 특성을 이해하고자 주요층서에 대한 고지형도 및 층후도를 생산광구별로 도면화하여 분석하였다. 또한 캐나다 ENCANA사와 국제공동연구의 일환으로 확보된 크리스티나 레이크(Christina Lake)광구의 현장 시추코어를 이용하여 코어의 상세기재, 비파괴 물성측정, 입도/비투멘 함유량 분석과 같은 다양한 실내 시추코어분석 실험을 수행 중이다. 비파괴 물성측정은 현장 시추코어의 물리적/화학적 특성을 파악하고자 MSCL(Multi sensor core logger)과 XRF 코어 스캐너(X-ray fluorescence core scaner)를 통해 이루어지며, 분석결과로 시추코어의 감마밀도(gamma density), P파 속도(P-wave velocity), 전기비저항(resistivity), 대자율(magnetic susceptibility) 및 색지수의 물성과 정량적 화학조성을 측정한다. 현장 시추코어의 일부는 유기용매를 이용하여 퇴적물 내의 비투멘을 완전히 추출하고 퇴적물 입도와 저류층 비투멘 함유량 측정에 이용되었다. 현장 시료 분석 결과들은 물리검층 자료와 대비를 통하여 저류층의 지질특성을 규명하는 연구에 이용될 예정이다. 마지막으로 오일샌드의 현생 유사 퇴적환경으로 알려진 서해 경기만 조간대에서 시추코어 퇴적물을 획득하여 상세 기재하였으며, 이를 통해 오일샌드 저류층의 퇴적 모델을 제시하고자 퇴적층서 연구를 진행 중이다. 향후 오일샌드 관련 시추코어의 분석 결과들이 종합되면 기존 보다 비투멘 회수효율을 향상시킬 수 있는 정밀한 오일샌드 저류층 지질모델을 수립할 수 있을 것으로 기대된다.

• Journal of the Korean earth science society
• /
• v.44 no.3
• /
• pp.210-221
• /
• 2023

The purpose of this study is to evaluate the content knowledge and problem solving process used by pre-service earth science teachers while discriminating faults on geological maps. For this, we collected and evaluated data on fixation duration and gaze plot, while pre-service earth science teachers (N=12) solved the problem on faults interpretation using an eye tracker (Tobii Pro Glass 2 model). The results were as follows. First, most of the pre-service earth science teachers know the concepts of the normal and reverse fault but they do not know the procedural knowledge essential for fault interpretation on geological maps. Second, the pre-service earth science teachers did not draw a geological cross-sectional map to interpret the fault on the geological map and interpreted the fault based on two-dimensional information collected from the geological map rather than three-dimensional information. Therefore, it is essential to improve the teaching and learning environment so that pre-service earth science teachers who will become earth science teachers in the future can learn procedural knowledge essential to comprehend natural phenomena including understanding natural phenomena. The results of this study can substantially help organize a new earth science curriculum or develop materials on teachers' education in the future.

• Journal of the Korean earth science society
• /
• v.35 no.3
• /
• pp.180-191
• /
• 2014

In this study, a geological field trip learning program using 3 Dpanorama virtual reality (PVR) techniques is developed to learn about the Chaeseokgang area located in a national park near Byeonsan-bando, Jeonbuk, Korea. The developed $360^{\circ}{\times}180^{\circ}$ PVR program can show every face of observational points and interact as zoom-in, zoom-out and image rotation. For the educational effects of the materials, it is provided with a compass, a protractor for measuring the dip of strata and observation of specimen of observational points. It also assists students to learn by providing enlarged images, pop-up windows, and expert explanation main observational points. The program is applied to the class of 35 gifted students in middle school to investigate the effectiveness of the program. The results showed that positive responses of the students were 85% or more. It is suggests that this program be used as indirect situated learning material and a solution to geological field trip problems like cost, safety, distance, and so on geological learning of middle school science.

• Tunnel and Underground Space
• /
• v.11 no.3
• /
• pp.206-216
• /
• 2001

Many failures in cut slopes occur during and following road construction. Failures are caused, in part, by a lack of understanding of the characteristics of rock mass including its geologic structure. The stability of rock slopes is closely related to factors that include the type of rock, development of geological structures, weathering, characteristics of rock, and the shape of the geologic features. Therefore, it is very important to consider these characteristics of rock mass in the evaluation of rock slope stability. In spite of investigation from many slope failures, these information data were not systematically stored and not efficiently utilized. In this study, a Database system named DB/SLOPE was developed using Oracle for systematic management of cut slopes. The developed database system can be used to estimate of slope stability and to predict of slope failure.

• Economic and Environmental Geology
• /
• v.12 no.3
• /
• pp.127-146
• /
• 1979

Though tungsten minerals have been mined for over fifty years in Korea, which has become one of the worlds largest tungsten producers since 1951, knowledge of their mineralogy and geochemistry is somewhat limited to the school of tungsten students. There is a considerable amount of literature throughout the world on the tungsten mineralogy, the geochemical behaviour of tungsten, the nature of tungsten deposits and geological environments for tungsten mineralisation. Commonly known tungsten minerals such as scheelite and wolframite belong to one of two series, the scheelite or the wolframite series, as the primary tungsten minerals. Secondary tungsten minerals are known rather rare, however, some of them plays an important role-of exploration guide in search for tungsten deposits. The geochemistry of tungsten is imperfectly known, and apparently the behaviour of tungsten in geological processes has been the subject of few studies. Recently, some aspects of the fundamental geochemistry of tungsten has been worked out and compiled the data in broad the up to date by many authors. In order to facilitate the better understanding and future exploration of tungsten deposits, an attempt has been made to summarise the existing knowledge of the fundamental geochemistry of tungsten, together with its common geochemical association with various types of tungsten deposits.