• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.112-119
• /
• 2021

The failure mode of piping systems due to seismic loads is the low-cycle fatigue failure with ratcheting, and it was found that the element in which nonlinear behavior is concentrated and damage occurs is the elbow. In this study, to quantitatively express the failure criteria for a pipe elbow of SCH40 3-inch carbon steel under low-cycle fatigue, the limit state was defined as leakage, and the in-plane cyclic loading test was conducted. For the carbon steel pipe elbow, which is the vulnerable part to seismic load of piping systems, the damage index was represented using the moment-deformation angle relationship, and it was compared and analyzed with the damage index calculated using the force-displacement relationship. An attempt was made to quantitatively express the limit state of the carbon steel pipe elbow involving leakage using the damage index, which was based on the dissipated energy caused by repeated external forces.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.2
• /
• pp.105-111
• /
• 2005

Shaking table tests are performed to investigate the seismic behavior of the batter pile and to bring up the countermeasures to improve the seismic performance of the batter pile. First of all, this study demonstrates how batter piles and vertical piles behave under static lateral loadings. Secondly, the vulnerability of batter plies under dynamic lateral loadings is demonstrated showing the axial forces and bending moments mobilized at the pile heads during shaking table tests. Thirdly, countermeasures to overcome the vulnerability of behavior piles during earthquakes are pursued. The countermeasures investigated in this study include introduction of a rubber element at the pile head and the deck plate connection, and introduction of hinge connection. Finally, the slope of batter piles which induces the minimum pile forces during the dynamic loadings are investigated and found to be 8:3 (Vertical to Horizontal).

• Economic and Environmental Geology
• /
• v.34 no.4
• /
• pp.385-394
• /
• 2001

There are serious damage of people and properties every year due to landslides that are occurred by heavy rain. Because these phenomena repeat and the heavy rain is not an atmospheric anomaly, the counter plan becomes necessary. The study area, Ulsan, is one of the seven metropolitan, and largest cities of Korea and has many large facilities such as petrochemical complex and factories of automobile and shipbuilding. So it is necessary assess the landslide hazard potential. In the study. the three steps of landslide hazard assessment techniques such as susceptibility, possibility, and risk were performed to the study area using GIS. For the analyses, the topographic, geologic, soil, forest, meteorological, and population and facility spatial database were constructed. Landslide susceptibility representing how susceptible to a given area was assessed by overlay of the slope, aspect, curvature of topography from the topographic DB, type, material, drainage and effective thickness of soil from the soil DB, lype age, diameter and density from forest DB and land use. Then landslide possibility representing how possible to landslide was assessed by overlay of the susceptibility and rainfall frequency map, Finally, landslide risk representing how dangerous to people and facility was assessed by overlay of the possibil. ity and the population and facility density maps The assessment results can be used to urban and land use plan for landslide hazard prevention.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.217-229
• /
• 2020

Recently, weather changes in Korea have intensified due to global warming, and the five major natural disasters that occur mostly include heavy rains, typhoons, storms, heavy snow, and earthquakes. Busan is vulnerable to snow disaster, given that the amount of natural disaster damage in Busan accounts for more than 50% of the total amount in the entire metropolitan cities in Korea, and that the Busan area includes many hilly mountains. In this study, we attempted to identify vulnerable areas for snowfall disasters in Busan areas using the geographic information system (GIS) with the data for both geographical and anthropogenic characteristics. We produced the maps of vulnerable areas for evaluating factors that include altitude, slope, land cover, road networks, and demographics, and overlapped those maps to rank the vulnerability to snowfall disasters as the 5th levels finally. To weight each evaluating factor, we used an entropy method. The riskiest areas are characterized by being located in mountainous areas with roads, including Sansung-ro in Geumjeong-gu, Mandeok tunnel in Buk-gu, Hwangnyeongsan-ro in Suyeong-gu, and others, where road restrictions were actually enforced due to snowfall events in the past. This method is simple and easy to be updated, and thus we think this methodology can be adapted to identify vulnerable areas for other environmental disasters.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.241-252
• /
• 1998

The objective of the research stated herein is to observe the actual responses of a low-rise nonseismic moment-resisting reinforced concrete frame subjected to varied levels of earthquake ground motions. First, the reduction scale for the model was determined as 1 : 5 considering the capacity of the shaking table to be used and the model was manufactured according to the similitude law. This model was, then, subjected to the shaking table motions simulating Taft N21E component earthquake ground motions, whose peak ground accelations (PGAs) were modified to 0.12g, 0.2g, 0.3g, and 0.4g. The lateral accelerations and displacements at each story and local deformations at the critical reginos of the structure were measured. The base shear was measured by using self-made load cells. Before and after each earthquake simulation test, free vibration tests were performed to find the change in the natural period and damping ratio of the model. The test data on the global and local behaviors are interpreted. The model showed the linear elastic behavior under the Taft N21E motion with the PGA if 0.12g, which represents the design earthquake in Korea. The maximum base shear was 1.8tf, approximately 4.7 times the design base shear. The model revealed fairly good resistance to the higher level of earthquake simulation tests. The main components of its resistance to the high level of earthquakes appeared to be 1) the high overstrength, 2) the elongation of the fundamental period, and 3) the minor energy dissipation by inelastic deformations. The drifts of the model under these tests were approximately within the allowable limit.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.19 no.1
• /
• pp.29-36
• /
• 2015

Base isolation is considered as a seismic protective system in the design of next generation Nuclear Power Plants (NPPs). If seismic isolation devices are installed in nuclear power plants then the safety under a seismic load of the power plant may be improved. However, with respect to some equipment, seismic risk may increase because displacement may become greater than before the installation of a seismic isolation device. Therefore, it is estimated to be necessary to select equipment in which the seismic risk increases due to an increase in the displacement by the installation of a seismic isolation device, and to perform research on the seismic performance of each piece of equipment. In this study, modified NRC-BNL benchmark models were used for seismic analysis. The numerical models include representations of isolation devices. In order to validate the numerical piping system model and to define the failure mode, a quasi-static loading test was conducted on the piping components before the analysis procedures. The fragility analysis was performed by using the results of the inelastic seismic response analysis. Inelastic seismic response analysis was carried out by using the shell finite element model of a piping system considering internal pressure. The implicit method was used for the direct integration time history analysis. In addition, the collapse load point was used for the failure mode for the fragility analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.1003-1012
• /
• 2022

The horizontal force transfer to the turbine and substructure of a wind power generation system is a very important factor in maintaining the safety of the system, but it is inevitably vulnerable to large-scale coastal disasters such as earthquakes and typhoons. Wind power generation systems built on the coast or far offshore are very disadvantageous in terms of economic feasibility due to an increase in initial investment cost because a more robust design is required when installed in areas vulnerable to coastal disasters. In this study, the GIS method was used to select the optimal site for a wind farm from the viewpoint of reducing the risk of coastal disasters. The current status of earthquakes in the West and South Seas of Korea, and the path and intensity of typhoons affecting or passing through the West and South Seas were also analyzed. Accordingly, the optimal offshore wind farm site with the lowest risk of coastal disasters has been selected and will be used as basic research data for offshore wind power projects in the region in the future.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.413-423
• /
• 2007

우리나라의 자연재해는 기상학적 자연현상에 의해 주로 발생되고 있으며 그 발생원인은 태풍, 호우, 폭풍, 폭풍우, 재설, 폭풍성 우박, 해일 및 기타(낙뢰, 돌풍, 설해, 결빙, 지진 등을 포함)로 구분되며 이중 발생빈도가 가장 높은 것은 강우에 의한 재해로 전체 재해발생 원인 중 약 80%로 대부분을 차지하고 있다. 특히 사면붕괴와 관련된 자연재해(산사태, 옹벽붕괴, 매몰 등)는 최근 국지성 집중호우를 포함하여 호우의 집중 강도가 높아지는 등 기상학적 원인에 의해 매년 발생하고 있다. 따라서 우리나라에서 발생되는 자연재해와 관련한 사면붕괴의 특성을 강우특성에 따라 조사 분석할 필요가 있으며 이에 적합한 대책들이 더욱 필요하다. 이 연구에서는 산사태 유발인자와 강우조건을 고려하여 산사태 잠재가능성을 평가하고 산사태 취약지역을 분석하여 지역적인 강우특성을 고려한 산사태 가능성을 평가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.191-191
• /
• 2020

현재 전 세계적으로 태풍, 지진, 홍수 등의 재해 피해가 빈번히 일어나고 있고, 4차 산업의 발달로 인한 AI기술을 활용하여 자연재해 전반을 예측 할 수 있는 시스템이 도입될 정도로 과학적으로 발전 되어진 반면에, 재난으로 인한 인명 피해 수를 저감 시키는 방향을 도모 하는 데에는 어려움이 있고, 국민들의 재난피해의식도 심각 하지 않은 추세이다. 이와 같은 문제점을 파악하기 위해 한국 국민 남녀 489명을 대상으로 재난위험인식에 대한 설문을 작성하여 조사를 진행하였다. 본 연구의 목적은 국민들의 재난 안전의 위험도에 대한 인식 수준이 어떠한지 분석하고, 영향 요인을 탐색 하는 데에 있고, 조사결과 안전취약계층은 스스로 대피 하는 데에 있어 큰 어려움이 있으며, 이중 여성은 남성에 비해 안전교육과 훈련의 접근성이 적음에 따라 위험도가 더 큰 것을 확인 할 수 있었다. 본 연구를 통해 재난 안전교육의 필요성을 가지고 재난 안전 시뮬레이션 프로그램이 구축되는 필요성이 있다고 사료되어지고, 미래에 자연재해 발생 시 문제점을 파악하고 인명피해 감소가 될 전망으로 기대가 된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.479-479
• /
• 2021

최근 기상이변으로 인한 자연재해 발생이 증가하고 있고, 그에 따라 도시의 재난 대응력 강화가 국내에서는 물론 국제적으로도 중요한 이슈가 되고 있다. 특히 쇠퇴지역은 재난재해 발생 시 인적·물적 피해가 일반 지역 보다 상대적으로 크며, 복구에도 많은 시간과 예산이 소요되므로 대응책 마련을 위한 도시재생지역의 정밀한 재난재해의 위험성 분석 기술이 필요하다. 이에 본 연구에서는 도시재생사업 대상지(311개)에 대한 재난재해 유형별 위험성 및 회복성을 종합적으로 분석하는 종합진단 기법을 개발하고, 이를 적용한 프로토타입 시스템을 개발하였다. 재난재해의 범위는 「재난 및 안전관리 기본법」을 준용하여 이에 도시재생사업 시행에 영향을 받아 재난재해 발생에 따른 위험정도가 변화할 가능성이 높은 자연재해 (폭우, 폭염, 폭설, 강풍, 지진)5종과 사회재난 (화재, 붕괴, 폭발) 3종 총 8종으로 정의하였다. 종합진단 기법은 기후변화에 관한 정부간 협의체(IPCC) 위험도 평가 방법을 준용하여 위험요소 (위해성·취약성·노출성)와 대비·대응요소 (회복성)로 구분하고, 전문가 자문회의를 거쳐 재난재해에 특히 취약한 쇠퇴지역의 특성을 반영할 수 있는 종합진단지수 산정식을 개발하였다. 또한 쇠퇴지역 재난재해 종합진단 시스템은 도시재생 업무를 수행하는 사용자가 신속히 정보를 분석하고 활용에 용이하도록 Web-GIS 기반으로 설계하였으며, 종합진단 기법에 의해 산정된 분석결과를 100m × 100m 격자 단위의 등급으로 가시화한다. 분석 결과는 지속적인 연구 개발을 통해 최적의 도시재생사업 의사결정 지원 서비스를 위한 기초 분석 자료로 연계하여 활용되며, 분석 DB는 클라우드 서비스 기반의 도시재생 데이터 플랫폼을 통해 공유된다.