• The Journal of Engineering Geology
• /
• v.33 no.2
• /
• pp.293-305
• /
• 2023

Three ground models are analyzed using a 1g shaking table and laminar shear box (LSB) to investigate the impact of the ground structure on seismic wave amplification during earthquakes. Multi-layer horizontal, embankment, and basin ground models are selected for this investigation, with each model being divided into dense and loose ground layers, Accelerometers are installed during the construction of each ground model to capture any seismic wave amplification owing th the propagation of an artificial seismic wave, sine wave sweep, and 10-Hz sine wave through a given ground model. The amplification of the tested seismic waves is analyzed using the observed peak ground acceleration and spectrum acceleration. The observed acceleration amplification in the multi-layer horizontal ground model is significantly higher the seismic waves that propagated across the dense ground-loose ground boundary compared with those that only propagated through the dense ground. Furthermore, the observed acceleration amplification gradually increases in the central part of the multi-layer embankment and basin models for the seismic waves that propagated across the dense ground-loose ground boundary.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.195-200
• /
• 2021

Orientation corrections for the total of 268 accelerograph stations of the Korea Meteorological Administration (KMA) were estimated using ambient noise cross-correlation. As this method uses ambient noise data instead of teleseismic waveforms from earthquakes under certain conditions, reliable orientation corrections can be obtained using only two-month long continuous seismic data from dense seismic networks in the Korean peninsula.Three-component continuous data recorded at the 268 accelerograph stations from January to February 2020 were used to estimate orientation corrections. The results are comparable to the previous results obtained from teleseismic waveforms; the overall standard deviations of the orientation corrections are less than 5°. Therefore, orientation corrections for the accelerograph station network can be tracked periodically by the ambient-noise method and the result can be used in various studies using the horizontal-component of acceleration data.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1371-1372
• /
• 2015

최근 대규모 지진으로 인해 세계적으로 많은 인명 피해와 경제적 손실이 발생 하고 있다. 특히 특고압의 전기를 사용자가 요구하는 저압의 전기로 바꾸는 수배전반이 파손 되는 경우 발생하는 2차 피해는 큰 편이다. 본 논문에서는 수배전반의 지진으로 인한 2차 피해를 줄이기 위해 저가형 가속도 센서를 사용해 자동 복귀형 내진 마운트 시스템을 개발하여 수배전반의 파손으로 인한 피해를 줄이고 기존 면진 마운트 설비의 수명을 늘리고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.3
• /
• pp.249-254
• /
• 2017

The paper presents a new short-term dynamic displacement estimation method based on an acceleration and a geophone sensor. The proposed method combines acceleration and velocity measurements through a real time data fusion algorithm based on Kalman filter. The proposed method can estimate the displacement of a structure without displacement sensors, which is typically difficult to be applied to earthquake or fire sites due to their requirement of a fixed rigid support. The proposed method double-integrates the acceleration measurement recursively, and corrects an accumulated integration error based on the velocity measurement, The performance of the proposed method was verified by a lab-scale test, in which displacement estimated by the proposed method are compared to a reference displacement measured by laser doppler vibrometer (LDV).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.4
• /
• pp.81-87
• /
• 2003

In this paper, the feasibility of using Shannon's sampling theorem to reconstruct exact mode shapes of a structural system from a limited number of sensor points and localizing damage in that structure with reconstructed mode shapes is investigated. Shannon's sampling theorem for the time domain is reviewed. The theorem is then extended to the spatial domain. To verify the usefulness of extended theorem, mode shapes of a simple beam are reconstructed from a limited amount of data and the reconstructed mode shapes are compared to the exact mode shapes. On the basis of the results, a simple rule is proposed for the optimal placement of accelerometers in modal parameter extraction experiments. Practicality of the proposed rule and the extended Shannon's theorem is demonstrated by detecting damage in laboratory beam structure with two-span via applying to mode shapes of pre and post damage states.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.179-185
• /
• 2020

Recently, in order to improve the performance of the Earthquake Early Warning System (EEWS) and to supplement the effects of earthquake disaster prevention in epicenters or near epicenters, development of on-site EEWS has been attempted. Unlike the national EEWS, which is used for earthquake disaster prevention by using seismic observation networks for earthquake research and observation, on-site EEWS aims at earthquake disaster prevention and therefore requires efficient design and evaluation in terms of performance and cost. At present, Korea lacks the necessary core technologies and operational know-how, including the use of existing EEWS design criteria and evaluation methods for the development of On-Site EEWS as well as EEWS. This study proposes hardware and software design directions and performance evaluation items and methods for seismic data collection, data processing, and analysis for localization of On-Site EEWS based on the seismic accelerometer requirements of the Seismic and Volcanic Disaster Response Act.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.15-22
• /
• 2020

In this paper, seismic ground motion generation method based on the observbation data from the Korea Meteorological Administration is proposed to predict the acceleration time history at an arbitrary location after earthquake. The proposed method assumes that the magnitude of the seismic accelrations obtained from the near stations decreases linearly with the distance from the epicenter to the corresponding station and the accelerations measured at the adjacent stations are assumed to have similar maximum acceleration and time shape functions. These two assumptions allow for the prediction of seismic acceleartion motion without geotechnical information where no seismic accelerometer is installed. This study verified the applicability of the prediction method using seismic observation data from Gyeongju Earthquake (2016), Pohang Earthquake (2017) and Sangju Earthuqkae (2019). The comparison results show that the proposed method is effective for predicting the seismic acceleration response spectrum and time history at arbitary locations.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.51-63
• /
• 2020

In this study, the model test of a reservoir was performed through a dynamic analysis method by using the data obtained from seismometers. Besides, we analyzed the behavior of the seismic acceleration amplification by reservoir height. To test the model, the data measured by the seismometers were applied at the foundation of the reservoir as input data, and the results from the analysis were compared with the data measured at the dam crest. The analysis results manifest that the peak values and the trend of the seismic wave obtained from the numerical analysis are in good agreement with the measured data. Also, the acceleration amplification ratio was proportional to the reservoir height and the magnitude of the earthquake. Through this study, the dynamic analysis method, which is based on the cyclic elastoplastic constitutive equation, can be considered as an appropriate technique to analyse the seismic behavior by the application of the data obtained from the seismometers installed in the reservoir. Also, the applicability of the seismometers can be enhanced through this technique in the future.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.25 no.6
• /
• pp.283-292
• /
• 2021

In this study, a structural health monitoring system for cable-stayed bridges is developed. In the system, condition assessment of the structure is performed based on measured records from seismic accelerometers. Response indices are defined to monitor structural safety and serviceability and derived from the measured acceleration data. The derivation process of the indices is structured to follow the transformation from the raw data to the outcome. The process includes noise filtering, baseline correction, numerical integration, and calculation of relative differences. The system is packed as a condition assessment program, which consists of four major processes of the structural health evaluation: (i) format conversion of the raw data, (ii) noise filtering, (iii) generation of response indices, and (iv) condition evaluation. An example set of limit states is presented to evaluate the structural condition of the test-bed and cable-stayed bridge.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.29-36
• /
• 2002

In the maintenance and retrofit planning of a bridge system, the optimal strategy for inspection and repair are suggested by minimizing the expected total life-cycle cost, which includes the initial cost, the costs of inspection, repair, and failure. Degradation of seismic performance is modeled by using a damage function. And failure probability is computed according to the degree of damage detection by random vibration theory and the event tree analysis. As an example to illustrate the proposed approach, a 10-span continuous bridge structure is used. The numerical results show that the optimum number of the inspection and the repair are increased, as the seismic intensity is increased and the soil condition of a site becomes more flexible.