• Korean Journal of Plant Resources
• /
• v.12 no.3
• /
• pp.204-208
• /
• 1999

We carried out this study to confirm the possibility of C. wilfordii cultivation using crop as a substitute for stake or net, and tested sit support crops, i.e., soybean, peanut, Perilla frutescens var. acuta Kudo, Job's tears, sorghum, and corn compared with net support. Effects of support crops on growth and root yield of C. wilfordii were as follows. Attracting efficiency of vine showed 94∼100% among crops. The number of branches per plant was 1 or 2 more in p. frutescens var. acuta Kudo, Job's tears, and sorghum support than in net support. Fresh root yield per 10a was 919kg in net support, while it was 717kg in P. frutescens var. acute Kudo, 656kg in Job' tears, and 652kg in sorghum support. However, the problem of decreased yield in these support crops could be overcome by cost saving of staking installation and by harvesting support crops. Therefore, C. wilfordii cultivation using P. frutescens var. acute Kudo, Job's tears, and sorghum as support crops showed most effective in labor and cost saving.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.12
• /
• pp.99-110
• /
• 2012

Inclined Earth Retaining Structure Method (IER method, briefly) is developed in order to improve the existing earth retaining method. In IER method, there are three main structures, front support, back support, and head binding. Especially, back support acts the role that reduces the earth pressure acting on the front support. In this study, the stability according to the installation angle and stiffness of front or back support is analysed by model tests. By the test results, it is known that inclined back support is very effective to reduce the earth pressure acting on the front support. Especially, the effect of the stiffness and installation angle of back support is analysed.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.6
• /
• pp.63-75
• /
• 2013

Inclined Earth Retaining Structure Method (IER Method), was developed in order to improve the mechanical properties of the existing earth retaining method. IER consists of two supports, which are front and back supports. In the IER method, back support is very effective for the reduction of the earth pressure acting on the front support. In this study, the effects of back support and fixing conditions of lower ends of supports are analysed by laboratory model tests in clay. The test results show that back support reduces the Leteral displacement of IER effectively, and according to the results the effect of interval and fixing condition of back support was analysed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.1-11
• /
• 2020

Medium to large post structures installed along the roadside without proper protection can lead to serious vehicle damage and occupant injury at the impact. In North America and Europe, splitting systems such as slip base or breakaway device are used to reduce impacts. But the system has the risk of secondary accident when the splitted post falls down to the traffic or pedestrian. Sliding Post have been proposed as a way to solve this problem. By studying the crash test results of the 1.3ton and 0.9ton vehicle with 60 km/h and 80 km/h to a Rigidly Fixed Post (RFP) and Sliding Post (SP), danger of the conventional RFP and crashworthiness of the SP have been proven. While collision analysis only from the acceleration measured at the center of the vehicle assumes the motion of the post is the same as that of the vehicle, in this paper, by adding high speed film data to the analysis with vehicle acceleration could have separate the post motion from the vehicle motion. It gives better explanations on the movement of post and vehicle in each distinctive time step and provides basics to the crashworthy post design.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.39-50
• /
• 2007

Barrier VII program is normally used for the design of flexible barrier, but if modelled properly it can be used for the analysis of vehicle impact to small sign posts. In this paper sign post is shown to be modelled as flexible barrier by combining beam and column elements at each beam node. Simulations with the Barrier VII program have been made for 7 impact cases composed of sign posts of circular and H section with rigidly connected support and breakaway support system. The impact speed used for the simulation ranged from 30km/h to 110km/h. The study shows that in the vehicle impacts to a circular sign post with high speed, the large deflection and high inertia force causes the sign plate to hit the windshield leading to a hazard to the occupants. It is also shown that impact to H section post results in small deflection of the post and abrupt velocity change and high deceleration of the impact vehicle causing severe damage to both the vehicle and occupants. Simulation study also shows that breakaway support system eliminates the potential danger of the vehicle impact to the rigidly connected small sign posts by reducing deflection of the post, abrupt change in velocity and deceleration level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8966-8976
• /
• 2015

Unshielded posts on roadside are a critical hazard to the safety of impact vehicle to the posts. A crashworthy post is developed. In the first phase, it dissipates the impact energy by the linear momentum conservation principle while the plastic impact between the post and vehicle takes place, then, the second phase dissipation follows by the deformation of the energy absorbing modules embedded in the guide trough of the foundation. Simulations of impacts to a rigidly connected post and crashworthy post were made using LS-DYNA program, which demonstrated the danger of unshielded rigidly connected post and the effectiveness of the proposed crashworthy post to the 0.9ton-80km/h impact.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.197-202
• /
• 2010

Post release mechanism is generally used to reduce the severity of the occupant of an errant vehicle impacting a roadside posts. The 820kg-50km/h head-on impact simulations were made using LS-DYNA program for the posts of 101.6mm Dia(t=4.0mm) with and without clip-type release mechanism. The simulation result was compared with impact test result to enhance the credibility of simulation model. The study shows that the high impact severity (THIV, PHD) and excessive deformation threatens the safety of the occupant when a car impacts a rigidly connected posts, while a post with clip-type slip base reduce the impact severity to a safe level.

• The Journal of the Korea Contents Association
• /
• v.16 no.4
• /
• pp.466-476
• /
• 2016

Technology-holding company was introduced in 2008 according to the Korean related law. In the end of 2014, technology holding company of university amounts to 39 companies, and ETRI Holdings is only the company belonging to the research institute among these companies. The technology holding company was launched to support a technology transfer from university or research institute to companies, and to boost up start-ups. Though 7 years has passed after the first technology-holding company was launched, there is no success model until now. Holding company is basically an investment company, which earns a profit from subsidiary company. The business model of a holding company is similar to venture capital that invests in start-ups. A direction of desirable business model of technology-holding company was suggested in this paper based on the case study on 2 Korean venture capital company. Holding company is generally categorized into two types. One is a pure holding company that only get a profit from subsidiary company, and the second is a operating holding company that creates an extra business revenue in addition to the role of pure holding company. In this paper, it is suggested that a technology holding company is recommended to be a operating holding company rather than a pure holding company.

• KOREAN POULTRY JOURNAL
• /
• v.49 no.3
• /
• pp.100-103
• /
• 2017

정유년 새해를 시작하면서 농협중앙회 축산경제는 농협경제지주 축산경제부문으로 새롭게 개편되었다. 변화된 환경에서 어떻게 운용할지 김태환 농협경제지주 축산경제대표를 만나 인터뷰한 내용을 정리했다.

• The Journal of the Korea Contents Association
• /
• v.15 no.10
• /
• pp.597-606
• /
• 2015

Technology is one of important factors to start-up. Researchers or engineers have led to make start-up, and research based company is one type of technology-based start-up. Technology holding company has made to encourage start-up and support research based company. Research based company was introduced in 2005 according to the Korean related law. In 2014, the number of technology holding companies of university is up to 39, but technology holding company of research institute is only one called ETRI Holdings. ETRI Holdings is a technology holding company to promote technology commercialization that established by ETRI in 2010. This study analysed the financial statements of ETRI Holdings for 5 years, and grasped the status of ETRI Holdings and 15 invested companies, research based companies. According to analysis ETRI Holdings played a role as technology holding company that invested in research based company, but had no virtual circle model until now. Also improvement directions for the management of technology holding company is suggested in this paper based on the analysis of financial statement.