• The Journal of the Acoustical Society of Korea
• /
• v.37 no.2
• /
• pp.99-109
• /
• 2018

The precision of the vibration-sensors, contact or non-contact types, is usually satisfactory for the practical measurement applications, but a sensor is confined to the measurement of a point or a direction. Although the precision and frequency span of the low-cost camera are inferior to these sensors, it has the merits in the cost and in the capability of simultaneous measurement of a large vibrating area. Furthermore, a camera can measure multi-degrees-of-freedom of a vibrating object simultaneously. In this study, the calibration method and the dynamic characteristics of the low-cost machine vision camera as a sensor are studied with a demonstrating example of the two-dimensional vibration of a cantilever beam. The planar image of the camera shot reveals two rectilinear and one rotational motion. The rectilinear vibration motion of a single point is first measured using a camera and the camera is experimentally calibrated by calculating error referencing the LDV (Laser Doppler Vibrometer) measurement. Then, by measuring the motion of multiple points at once, the rotational vibration motion and the whole vibration motion of the cantilever beam are measured. The whole vibration motion of the cantilever beam is analyzed both in time and frequency domain.

• Water for future
• /
• v.13 no.2
• /
• pp.55-62
• /
• 1980

It is very important thing that the high tide prediction along the sea-side before the typhoon landing. In Korea, every year somewhere of the near sea-shore has been suffered much damages by the high tide during typhoon season, and the governement has to spend much of the reserved budget to rescue and reconstruction the damaged facilities in the seas-shore area. In this point of view, as none of the high tide prediction program in Korea, the author aims to develope this kind of study, so that this application program may dedicate the concerned organizations such as Ministry of Construction, Commerce and Industry, and Agriculture Forestry and Fishery, etc. Due to developed the software of high speed electronic computer in recently, the complicated numerical analysis can be solve very conviniently. So the author tries to prepare the high tide predecation program using the equation of motion and continous in the fluide dynamics by the constant time and distance of the differentation method. The input data for this program are the weather chart and depth data of the mattered bay, inner-sea or outer-sea. This program has been applied on the Pohan inner harbor as a model and find ort the program computation results is coincide with the observed values of "FRAN" typhoon in 1976 at the Pohang harbor.ng harbor.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_4
• /
• pp.1255-1266
• /
• 2020

In this study, a complex simulation prototype was developed for rapid and accurate prediction of chemical dispersion range in order to reduce human casualties caused by chemical accidents. Complex simulation considered the leakage momentum during the near-field dispersion to take into account the leakage characteristics of the chemical. In the far-distance dispersion process, the wind distribution of the existing model, which was presented uniformly, was improved using weather and topographical information around the accident site, to realize a wind field similar to the actual one. Finally, the damage range was more precise than the existing model in line with the improved near- and far-distance dispersion process. Based on the results of damage range prediction of the complex simulation, it is expected that it will be highly utilized as a system to support policy decision-making such as evacuation and return of residents after a chemical accident.

• Journal of the Korea Convergence Society
• /
• v.6 no.4
• /
• pp.249-255
• /
• 2015

The study was to investigate the effects of stimulus velocity and passer's skill level on anticipation timing performance. Fourteen subjects(seven novices and seven experts) were required to make a total 12 passes in coincidence with an experimentally manipulated moving light signal in randomly presented three different conditions(4m/s, $3m/s{\rightarrow}5m/s$, $5m/s{\rightarrow}3m/s$). Results of analyses showed that absolute error(AE) and constant error(CE) were greater in constant acceleration of the moving stimulus. In addition, experts were more accuracy and consistency than novices on absolute, constant and variable error(VE). These findings indicated that stimulus velocity served as the major determination of anticipation timing performance of passing.

• Resources Recycling
• /
• v.23 no.6
• /
• pp.30-39
• /
• 2014

The trajectories of PCB(Printed Circuit Board) particles in the corona discharge electrostatic separation was simulated. The PCB particles are prepared by crushing bare board, which disassembled from electronic components, consist mostly of copper and FR-4(Flame Retardant Level-4) Firstly, a model was established for calculating of detachment points of PCB particles from the rotating electrode in separator. The model of detachment points was derived from equilibrium of force such as gravity force, centrifugal force, electrostatic force. The trajectories of particles after detachment was calculated by acceleration derived from time-integrating method of motion equation. In this simulation, particle size, supplied voltage, rotation speed of rotating roll electrode and angle of induction electrode were adopted as variables. While the trajectories of FR-4 particles were affected by all variables, rotation speed of rotating roll electrode was dominant variables affecting trajectories of copper particles.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.59-59
• /
• 2011

파랑의 전파와 변형에 대한 연구에는 수심방향으로 적분한 2차원방정식인 완경사방정식과 Boussinesq 방정식을 기반으로 한 수치모형을 이용한 연구가 최근까지 가장 활발하게 진행되어 오고 있다. 그러나 실제 구조물의 설계에는 2차원 수치모형에서 고려할 수 없는 수심방향 유속에 기인한 정확도의 문제로 인해 구조물의 형상과 재원을 설계하기 위한 정교한 수치모형실험이 어려워 주로 수리모형실험에 의존해 왔다. 수리모형실험은 실제 현상을 가장 잘 재현해낼 수 있어 신뢰성이 매우 높지만 다양한 실험을 수행하기가 어렵고 많은 시간과 비용이 소요되는 단점이 있다. 이에 따라 최근 수심방향으로 완전한 운동방정식인 Navier-Stokes 방정식을 푸는 3차원 수치모형에 대한 연구가 활발히 진행되고 있다. 이론적으로 매우 우수한 모형이긴 하나 정확도 높은 결과를 얻기 위해서는 매우 조밀한 격자를 필요로 하기 때문에 아직까지 막대한 계산시간이 필요하다는 단점이 있으나 컴퓨터 기술이 급격한 속도로 발전하고 있어 Navier-Stokes 방정식 모형의 적용 가능성은 계속 높아지고 있다. 파랑변형을 다루는 수치모형실험을 수행할 때 외부조파를 사용할 경우 구조물이나 지형에 의해 반사되어 나온 파랑이 조파지점에 도달할 때 실험영역으로 재 반사되는 문제가 발생한다. 이를 해결하기 위해 내부조파기법의 개발에 대한 연구가 필수적이었으며, 자유수면변위를 변수로 사용하는 모형의 경우 그 연구가 매우 활발하게 진행되어 왔다. 한편, Navier-Stokes 방정식 모형의 경우 자유수면변위를 변수로 사용하는 2차원 모형에 비해 상대적으로 연구가 미흡하였다. 본 연구에서는 기존의 연직 2차원 Navier-Stokes 방정식 모형에 사용된 연속방정식에 질량 원천항을 추가하는 내부조파기법을 도입하여 3차원 수치모형에서 고립파를 내부조파하고, 급경사에서의 고립파의 처오름 및 처내림 현상을 수리모형 실험결과와 비교 및 분석하였다. 수치모형은 Navier-Stokes 방정식을 엇갈림 격자체계에서 계산하는 동수압 모형으로서, Two-step projection 기법을 사용하는 유한차분모형을 사용하였다. 본 수치모형은 난류의 해석을 위해서 상대적으로 큰 에디(eddy)만을 고려하는 SANS(spatially averaged Navier-Stokes) 방정식을 계산하는 LES(large-eddy-simulation) 기반의 수치모형으로, 난류 모델링을 위해 Smagorinsky LES 모형을 사용한다. 또한, 압력장의 계산을 위해 Bi-CGSTAB 기법을 이용하여 Poisson 방정식의 해를 구하였으며, 자유수면 추적을 위하여 2차 정확도의 VOF(volume-of-fluid) 기법을 사용하였다. 수치모형실험이 전체적으로 수리모형실험에서 관측한 파랑의 처오름 및 처내림 현상을 잘 재현하고 있는 것으로 나타났으며, 정량적인 비교를 통해 수치모형의 성능을 검증하였다.

• Journal of Korea Water Resources Association
• /
• v.43 no.10
• /
• pp.921-932
• /
• 2010

In this study, the adjustment processes of the disturbed channels by sand or gravel mining were investigated by a two dimensional numerical model in the generalized coordinate system. As a numerical scheme, the CIP (cubic interpolated pseudoparticle method) method was used to calculate the advection term in the flow field and central difference method was used to the diffusion term in it. The pit of the channel was partially filled with sediment at the toe of the pit upstream. As time increased, the headcut erosion upstream in the pit was decreased due to the sediment inflow. The almost inflow sediment upstream was trapped into the pit and the sediment deposit wedge migrated downstream in the pit with the steep submerged angle of repose. The numerical model was reproduced well the evolution processes of the channel. The mining pit migrated with speed as the channel was steep, and the numerical results were in overall agreement with the experimental results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.221-225
• /
• 2013

Proper management of provisional prosthesis is key to success in prosthodontics. Provisional restoration on maxillary anterior missing area frequently come across a incident of falling off especially in patients with long span pontics and oval arch shape. This is because maxillary anterior teeth are more exposed to horizontal force than the posterior teeth and additional anterior cantilever effect will negatively affect to the retention of provisional prosthesis. Beside that maxillary anterior provisional prosthesis should provide proper incisal guidance during the mandibular functional movements. However occlusal contacts on the prosthesis in maximum intercuspal position are located on opposite side of fulcrum line of prosthesis which will cause removing force against the provisional prosthesis. This case report present that provisional implant prevent pre-described harmful effect on maxillary anterior fixed provisional prosthesis and provide comfort and satisfactory result during post-extraction healing period.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.3
• /
• pp.29-40
• /
• 2013

Seismic response of single degree of freedom system supported by shallow foundation was analyzed by using nonlinear explicit finite difference element code. Numerical analysis results were verified with dynamic centrifuge test results of the same soil profile and structural dimensions with the numerical analysis model at a centrifugal acceleration of 20 g. Differences between the analysis and the test results induced by the boundary conditions of control points can be reduced by adding additional local damping to the natural born cyclic hysteretic damping of the soil strata. The analysis results show good agreement with the test results in terms of both time histories and response spectra. Thus, it can be concluded that the nonlinear explicit finite difference element code will be a useful technique for estimating seismic residual displacement, earthpressure etc. which are difficult to measure during laboratory tests and real earthquake.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.43-43
• /
• 2011

최근 컴퓨터 기술의 발전으로 수심방향으로 완전한 운동방정식인 Navier-Stokes 방정식을 이용하는 3차원 수치모형에 의한 연구가 기초과학 분야인 수학에서부터 공학은 물론 의학 분야까지 광범위하게 진행되고 있다. 3차원 수치모형을 이용한 연구는 이론적으로 매우 우수하긴 하나 정확도 높은 결과를 얻기 위해서는 매우 조밀한 격자를 필요로 하기 때문에 아직까지 막대한 계산시간이 필요하다는 단점이 있으나 근래의 컴퓨터 기술이 엄청난 속도로 발전하고 있는 점을 감안할 때 적용 가능성은 계속 높아지고 있다. 이러한 흐름에 따라 해안공학 분야에서도 3차원 수치모형을 이용한 다양한 연구가 시도되고 있다. 복잡한 해안구조물로 인한 파랑변형 및 구조물의 안전성 등을 검토할 때 기존의 평면 2차원 수치모형이나 연직 2차원 수치모형으로는 재현이 힘들어 상대적으로 수치모형을 활용한 연구의 효용성이 낮았던 것에 비해 3차원 수치모형을 활용할 경우 복잡한 지형 및 구조물의 형상을 재현할 수 있기 때문에 좀 더 유용하게 사용될 수 있다. 한편, 파랑변형을 다루는 수치모형실험을 수행할 때 외부조파를 사용할 경우 구조물이나 지형에 의해 반사되어 나온 파랑이 조파지점에 도달할 때 실험영역으로 재 반사되는 문제가 발생한다. 이를 해결하기 위해 내부조파기법의 개발에 대한 연구가 필수적이었으며, 2차원 수치모형을 중심으로 그 연구가 매우 활발하게 진행되어 왔으나 Navier-Stokes 방정식 모형의 경우 상대적으로 연구가 미흡하였다. 본 연구에서는 3차원 Navier-Stokes 방정식 모형에서 내부조파기법을 도입하여 목표 파랑을 조파하였다. 수치모형은 Navier-Stokes 방정식을 엇갈림 격자체계에서 계산하는 유한차분모형으로 자유수면 추적에는 2차 정확도의 VOF(volume-of-fluid) 기법을 사용한다. 수치모형실험 결과를 일정한 수심을 전파하는 정현파의 해석해와 비교하였으며, 수치모형실험 결과가 비교적 정확하게 목표 파랑을 조파할 수 있음을 검증하였다.