• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.261-264
• /
• 2012

본 연구에서는 현행 지적측량 관련 법률에서 규정하고 있는 지적측량에 대한 성과인정 범위와 적용 장비 규정, 관련 규정에서의 정확도와 적용 규정 등을 종합적으로 고찰하여 지적재조사에 관한 특별법에서의 규정하고 있는 지적측량의 성과인정 범위에 적합한 지적측량 장비의 성능 기준을 마련해 보고자 하였다. 연구성과는 다음과 같다. 적용 장비의 성능과 성과인정 범위에 대해 현행 법률과 지적재조사에 관한 특별법 규정의 비교를 통해 지적재조사사업시 장비의 성능개선이 필요한 부분에 대해서 기초측량과 세부측량으로 구분하여 기준을 제시하였다. 본 연구의 성과는 지적재조사사업을 위한 기본계획수립시 측량 장비 수급 계획에 기초자료로 활용이 가능하다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.8
• /
• pp.3470-3476
• /
• 2012

In this study, for cadastral surveying specified in current relevant legislation, regulations of allowable error tolerance and applicable equipments, accuracy in the relevant regulations and applicable regulations were comprehensively studied. Based on them, the objective was to develop performance standard for cadastral surveying equipments satisfying allowable error tolerance of cadastral surveying specified in the special law for cadastral re-survey. The study results are as follows. By comparing current legislation for performance and allowable error tolerance of applicable equipments with provisions of the special law for cadastral re-survey, analyzed were where performance of equipments needs to be improved on cadastral re-survey project. Based on them, as primary control point surveying and detail surveying were separated, performance standard of equipments were presented. Results of this study may be utilized as basic materials for supply and demand program of surveying equipments on establishment of the basic plan for cadastral re-survey project.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.393-400
• /
• 2014

"Master Plan of Cadastral Resurvey Project" aims to put the governmental budget of 1.3 trillion Won into the cadastral resurvey project until 2030 that reflects the preliminary feasibility study, conducted by government at 2012. The cadastral Resurvey, which takes 78.8% of the expenses in the project, has to take an critical role for earning the most effective results from the project. The cadastral confirmation surveying take up almost 13% of the project and is controlled under the areal SOC(Social Overhead Capital) projects in current "Master Plan of Cadastral Resurvey Project". Also, the affiliations of cadastral resurvey and linear SOC projects are expected to bring advanced results, although those are excluded from cadastral confirmation surveying. For linear SOC projects, the land division survey is conducted by using boundary stakes in boundary survey, while the cadastral resurvey is conducted within the SOC project area, after the completion of the project. In this study, we could conclude that cadastral resurvey results with the world geodetic system from boundary survey at the point of land division could be produced without the duplication of land division and cadastral resurvey. As a result, the expected benefits are 73,877 parcels and 4,078 million won, annually.

• Journal of Industrial Convergence
• /
• v.20 no.8
• /
• pp.33-40
• /
• 2022

In this study, we tried to suggest a plan to improve the efficiency of operation after analyzing the actual conditions by selecting case areas operated by the cadastral resurvey responsible agency system. The research results are as follows. In the evaluation of the selection of a cadastral resurvey agency, a method to raise the qualitative evaluation score was suggested. The expansion of support for the cadastral resurvey agency made it possible to automatically connect and install when the LandyGo program is updated, and suggested that prior training should be stipulated in the related regulations. In the performance of cadastral resurvey surveying and division of duties, the installation of temporary boundary monuments and determine boundary monuments should be integrated. And this suggested the direction of conserving the project cost of the cadastral resurvey agency through joint implementation. Also, in the short-term and long-term perspectives, a plan for realization of project cost distribution in connection with the expansion of the entrustment of the cadastral resurvey responsible agency was presented. If the responsible agency system is operated by reflecting the results of this research, it is expected to improve the satisfaction of the project participants and shorten the project period.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.65-75
• /
• 2013

In this study, one of the main aims is to build up a technical foundation for promoting the cadastral resurvey effectively and to improve the accuracy of cadastral surveying is to make use of precise surveying techniques in allowance of position errors as reference accuracy in cadastral resurvey, which is proper to obtain the sufficient accuracy of the cadastral control points, and parcel boundary points by introducing the GNSS-based surveying techniques on cadastral survey. In detail, the existing procedures and outcomes of cadastral survey were compared and analyzed for suggesting a better survey technique than that of the other techniques in a variety of aspects of capability of cadastral survey. The new skills and supports could be upmost importance when doing cadastral survey. What's more, essentially, 'The Measurement Department' makes all the efforts to establish 'The Surveying Regulations'. This could possibly apply GNSS-based surveying technique to the cadastral resurvey for the foreseeable future and this research paper suggested that how to improve absolute accuracy of cadastral reference points by means of putting to use the appropriate models of measurement further.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.39-46
• /
• 2014

Network RTK GNSS positioning technique which has been developed to overcome the limitation of Single reference station RTK is used widely in the field of general surveying, cadastre surveying and engineering surveying due to the high accuracy and efficiency. It is specified Network RTK, Single reference station RTK and Static of GNSS as a surveying method in the regulation of Cadastre Re-survey Surveying. In this study, Network RTK and Static GNSS surveying were accomplished at cadastral re-survey field in Hadong, Gyeongnam and the surveying results were compared. Also, to analyze the performance of site calibration in Network RTK surveying, two types of Network RTK surveying with and without site calibration were accomplished and the results was compared. The research result shows that average positioning error between Network RTK(VRS) without site calibration and Static surveying result is 2.44cm and 1.53cm respectively and average positioning error between Network RTK(VRS) with site calibration and Static surveying result is 0.19cm and 0.82cm respectively at two zone. So, it was proved the effect of calibration in network RTK(VRS) surveying.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.23-24
• /
• 2014

NGII (National Geographic Information Institute) has been providing VRS (Virtual Reference Station) service so that could determine precise positioning in real time since 2007. However, since the VRS service has to maintain the connected status with VRS server, the number of users who can use VRS service are limited by capacity of VRS server. To solve this problem, NGII has been providing FKP (Virtual Reference Station) service using one way telecommunication from November 1, 2012. Therefore, it is predicted that the usage of FKP service will increase in public surveying and cadastral resurveying in the future. However, the studies with respect to analysis of FKP precision for applying to public surveying and cadastral resurveying is not conducted enough. In this study, to analyse the application possibility of FKP on the public surveying and cadastral resurveying, the two kind analysis were performed. First is the analysis of accuracy according to the configuration of reference station of FKP and VRS. One is consisted of same reference stations, another is consisted of different reference stations. Second is the accuracy anlalysis of horizontal and vertical positioning acquiring VRS and FKP data in various measurement environment based on VRS regulation. Result of first study, Positioning accuracy according to the configuration of the reference stations satisfies related regulation. However, accuracy of FKP in case of different reference stations is worse than in case of same reference stations.. The result of second test shows that the horizontal precision of FKP and VRS in good measurement environment satisfy the allowed precision. However, in some case, horizontal precision of FKP and VRS in poor measurement environment exceed the allowed precision. In addition, the number of exceeding the allowed precision in the FKP is more than the VRS. The vertical precision of the VRS satisfy related work provision. In conclusion, the result of this study shows that the FKP only in open area should be used for public survey and cadastral resurvey. Therefore the additional studies with respect to the improvement of FKP precision should be conducted.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.509-516
• /
• 2017

In cadastral surveying, there are problems that no area error is allowed where numerical surveying is carried out, and allowable area error is specified irrespective of parcel shape where graphic surveying is carried out. In this research, we derived a general formula of parcel area error necessary for grasping these two problems. The calculations using the derived formula showed that where the coordinate error of the boundary point is set to 5cm+10ppm practically, then even a small parcel of $100 m^2$ includes non-negligible area error of $0.71m^2$. And, it is found that the area error specified by the current egulation is based on a rectangular parcel of 1:5 aspect ratio. These results show that the area error of polygon parcel can be determined by a single formula by specifying the coordinate error of the boundary points, and can be used to revise the current regulations that can be applied uniformly regardless of surveying methods.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.5-16
• /
• 2022

Since 1910 the enactment of the Land Survey Act, Special Act on Cadastre Resurvey was enacted after about a century and the Surveying for the Cadastral Resurvey Project will be scheduled by 2030. The establishing boundaries occupies an important proportion in this project and the regulation on surveying for the cadastral resurvey provide specific examples of the criteria for it. This regulation can be set according to not only ground boundary and cadastral boundary, but also customary boundaries of the relevant region and boundaries agreed between landowners. However, there is no standard rule whether to accept the agreement boundary and can be abused some problems. In addition, there is a question about the subject that agreement between individuals on the public record managed by the nation. In this study, boundary agreed in cadastre related subject is examined in depth and improvement proposal about the problems. The research results can be established evaluation standard of competent authorities of the cadastral records and the Surveying for the Cadastral Resurvey Project will be progressed smoothly with effective use of land.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6196-6203
• /
• 2013

This study examined cadastral surveying technology regulated under the "Special Law for the cadastral surveying", and analyzed the related surveying methods currently used. Based on the analysis, this study suggested the efficient application plan future cadastral surveying projects. The new technologies analyzed were GNSS, GPS RTK, Network RTK, GPS Augmentation System, and the mobile and auto sighting TS. As a result of the analysis, this study suggests that if a receiving technology is possible for the integrated receiving of GPS/GLONASS/Galileo systems, both the accuracy of location determination could be enhanced and stable data could be obtained. The Network RTK technology may solve the constraint receiving factors of satellite information in the long term if a GPS Augmentation System is used. Finally, mobile and auto sighting TS technologies can reduce the personnel factors, but can be applied after the offset problem is overcome.