• Korean Journal of Construction Engineering and Management
• /
• v.9 no.1
• /
• pp.187-198
• /
• 2008

There are usually plenty of material inventories in a construction site. More inventories can meet unexpected demands, and also they may have an economical advantage by avoiding a probable escalation of raw material costs. On the other hand, these inventories also cause negative aspects to increase costs for storing redundant inventory as well as decreasing construction productivity. Therefore, a proper method of deciding an optimal level of material inventories while considering dynamic variations of resources under uncertainty is very crucial for the economical efficiency of construction projects. This research presents a stochastic modelling method for construction operations, particularly targeting a work process involving on-site fabrication of raw materials like iron-rebar process (delivery, cut and assembly, and placement). To develop the model, we apply the concept of factory physics to depict the overall components of a system. Then, an optimal inventory management model is devised to support purchase decisions where users can make timely actions on how much to order and when to buy raw materials. Also, optimal time lag, which minimizes the storage time for pre-assembled materials, is obtained. To verify this method, a real case is applied to elicit an optimal amount of inventory and time lag. It is found that average values as well as variability of inventory level decreased significantly so as to minimize economic costs related to inventory management under uncertain project condition.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.21 no.3
• /
• pp.240-248
• /
• 1999

To investigate the expression pattern of noncollagenous bone matrix proteins such as osteonectin(OSN), osteopontin(OPN) and osteocalcin(OSC) mRNA during bony healing procedure induced by guided bone regeneration method, we made artificial defects on bilateral femur of rats. Then induced bony healing by application of a nonabsorbable PTFE membrane in experimental sites and without its application in control sites for 3 weeks. The mRNA expression pattern at specimens obtained at 1, 2 and 3 weeks after operation was detected by in situ hybridization method using its antisense mRNA probes. The experimental sites revealed more rapid and favorable bony healing than control sites and new bone formation was limited within defected area by inhibitory activity of bone marrow cells. In experimental sites, the OSN and OSC mRNA were expressed strongly on osteoblasts of regenerating cortical bone at 1st week and on osteoblasts lining the trabecular bone in marrow space at 3rd week, whereas, in control sites, their expression were noted on osteoblasts lining the reactively formed sponge bones at 2nd and 3rd week. In addition, the OPN mRNA was expressed on osteoblasts and osteoclasts at sites of remodeling and osteocytes of remained trabecular bone of defected area in experimental sites and on macrophages at 1st week and osteoclasts at sites of remolding at 2nd and 3rd week in control sites. The above findings suggest that the more rapid and favorable bony healing might be induced by blocking of invading fibrous connective tissue into bony defects. And the earlier expression of OSN and OSC mRNA on osteoblasts of experimental sites suggest that the formation and resorption of regenerating bone was more rapidly progressed in confined spaces made by applicate membranes.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.81-86
• /
• 2016

Recently, frequent traffic congestion has occurred in domestic urban roads. As a solution for downtown traffic congestion in domestic urban roads, plans for great depth underground double-deck tunnels have been made. Great depth underground double-deck tunnels that have been planned for passenger cars, has the structure of a network type; the entry of vehicles is carried out in the underground space. In these network great depth underground double-deck tunnels, the cross section and the height of the tunnel are smaller than the general road tunnel, and the smoke of a fire will propagate faster than the evacuation of tunnel passengers by the action of the traffic-ventilation and casualties are expected. Therefore, in the present study, an attempt was made to prevent the delay system for fire smoke diffusion at the time of a fire in a domestic network great depth underground double-deck tunnel according to the area of the tunnel block during the operation of the delay system for fire smoke diffusion to analyze the effects of reducing the inflow velocity. When the area of the tunnel block was not less than 50%, the effect of reducing about 21% of the wind speed acting on the tunnel was significant. If the area is more than 50%, the diffusion rate of fire smoke was reduced by approximately 21%, which will be useful for a safe evacuation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.342-348
• /
• 2014

Onshore great fires can normally be extinguished by firefighters using special firefighting equipment and its suitable method. However, offshore fires on the ships are to be extinguished by the crew without any supports from the onshore. Also, crews working on board are exposed to high risk of emergency evacuation due to the complicated structure arrangement of the ships and different accident types such as fire and ship collisions. As most of damage and loss of life in fire are associated with suffocation, shortening of evacuation time is an important factor to improve a survival rate. In this study, visibility in the accommodation area is analyzed by using the temperature and smoke flow which are obtained by the Fire Dynamic Simulator(FDS) as a Three-Dimensional Fire Analysis program to understand the survival rate of the crew upon the fire. The fire doors for most of ships are designed to close automatically when the fire alarm is activated. These automatic closing of the fire doors is a very effective system to delay the spread of flame and smoke flow for the unmanned spaces of the fire protected area. However, if the crew cannot escape within the estimated time, the crew inside the fire protected area will be damaged a lot. In this paper, the comparative analysis between the evacuations by using the fire door from the fire protected area and the suggested fire shielding structure in this study is carried out by the smoke flow rate and the temperature rise rate.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.67-80
• /
• 2014

Long-term stability and delayed failure of granite were evaluated through the laboratory test based on Wilkins method and Brazilian disc test (BDT) which yields tensile strength, mode I fracture toughness and subcritical crack growth parameters. Then, the long-term strength of granite was estimated by using analytical models and long-term stability of compressed air-energy storage (CAES) pilot cavern pressurized up to 5 ~ 6 MPa was evaluated using numerical code, FRACOD with the determined subcritical crack growth parameters. The results of test and analyses showed that the subcritical crack growth index, n was determined as 29.39 and the inner pressure of 5 ~ 6 MPa had an insignificant effect on the long-term stability of pilot cavern. It was also found that the measurement and analysis of acoustic emission events can describe the accumulation of damage due to subcritical crack growth quantitatively. That is, AE monitoring can provide the current status of rock under loading if we make an identical installation condition in the field with that of the laboratory test.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.256-261
• /
• 2008

The curtain-wall work has been more frequently applied in the construction industry since demand of high-rise buildings has been increased. The curtain-wall work is usually performed with the frame work simultaneously for reducing construction period, but it might be delayed because of several problems caused by interference of process. However, there is not an appropriate tool which can be used by a work manager for adjusting quantity of the construction equipments or the workers when the curtain-wall work was delayed. To resolve this problem a construction simulation anticipating and analyzing potential problems before starting the work can be applied in the curtain wall work. This research suggests a general model for the curtain-wall work by using construction simulation and produces a combination of construction equipments and workers which can estimate optimum work productivity.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.4
• /
• pp.42-50
• /
• 2008

The real-time bio-signal monitoring system based on the ZigBee and SIP/RTP has proposed and implemented for telemedicine but that has some problems at the stabilities to transmit bio-signal from the sensors to the other sides. In this paper, we designed and implemented a real-time bio-signal monitoring system that is focused on the reliability and efficiency for transmitting bio-signal at real-time. We designed the system to have enhanced architecture and performance in the ubiquitous sensor network, SIP/RTP real-time transmission and management of the database. The Bluetooth network is combined with ZigBee network to distribute traffic of the ECG and the other bio-signal. The modified and multiplied RTP session is used to ensure real-time transmission of ECG, other bio-signals and speech information on the internet. The modified ECG compression method based on DWLT and MSVQ is used to reduce data rate for storing ECG to the database. Finally we implemented a system that has improved performance for transmitting bio-signal from the sensors to the monitoring console and database. This implemented system makes possible to make various applications to serve U-health care services.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.106-112
• /
• 2001

Unfortunately, the area without economical efficiency, especially the far distance sea, is much lower than that of a urban area-built-up area. It should be promoted the equivalent level to a urban area in the light of future-oriented universal service. Actually, Because propagation environment of mobile communication in the sea is greatly different from that for inland focused on built-up area, a propagation prediction model in the sea should be distinguished from inland-based one. Accordingly, the purpose of this study is to suggest the propagation prediction model for the sea service as a method to minimize unnecessary facilities investment and maintenance caused by additional or new building of a base station. If mobile phone service for far distance sea is provided by expanding limited communication zone of narrow band CDMA mobile communication whose spread band FA is 1.2288MHz. Suggested propagation prediction model includes five parameters to minimize facilities investment of a base station and maximize channel capacity: equivalent line of sight, chip delay by PN code, antenna altitude, power of base station and gain of antennas. Finally, suggested propagation prediction model is simulated and, the results are examined for its utility by comparing with loss of free space.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.173-184
• /
• 2007

Garbage collection in the Java virtual machine is a core function that relieves application programmers of difficulties related to memory management. In this paper, we evaluate and analyze the performance of GenGC and GenRGC, garbage collectors for embedded Java virtual machines. For performance evaluation, we employ CVM, a real embedded Java virtual machine developed by Sun Microsystems, Inc., as a platform and also use a widely-used SpecJVM98 as a set of benchmark programs. To compare the performance of GenGC and GenRGC, we first evaluate the time of garbage collection and the delay time caused by garbage collection. Second, for more detailed performance analysis of GenRGC, we evaluate the time of garbage collection and the delay time caused by garbage collection while changing the sizes of a block and a frame. Third, we analyze the size of storage space required for performing GenRGC, and show GenRGC to be suitable for embedded environment with a limited mont of memory. Since CVM is the most representative one of embedded Java virtual machines, this performance study is quite meaningful in that we can predict the performance of garbage collectors in real application environments more accurately.

• The KIPS Transactions:PartA
• /
• v.16A no.2
• /
• pp.101-112
• /
• 2009

Existing techniques for defragmentation of the file system need intensive disk operation for some periods at specific time such as disk defragmentation program. In this paper, for solving this problem, we design and implement the automatic and continuous defragmentation free system by distributing the disk operation. We propose the Automatic Layout Scoring(ALS) mechanism for measuring defragmentation degree and suggest the Lazy Copy mechanism that copies the defragmented data at idle time for scattering the disk operation. We search the defragmented file by Automatic Layout Scoring mechanism and then find for empty spaces for that searched file. After lazy copy of searched fils to empty space for preventing that file from being lost, the algorithm solves the defragmentation problem by updating the I-node of that file. We implement these algorithms in Linux and evaluate them for small and defragmented file to get the layout scoring. We outperform the Linux EXT2 file system by $2.4%{\sim}10.4%$ in layout scoring evaluation. And the performance of read and write for various file size is better than the EXT2 by $1%{\sim}8.5%$ for write performance and by $1.2%{\sim}7.5%$ for read performance. We suggest this system for solving the problem of defragmentation automatically without disturbing the I/O task and manual management.