• Journal of Digital Contents Society
• /
• v.9 no.1
• /
• pp.87-99
• /
• 2008

High Altitude Platform network systems utilize Unmanned Aerial Vehicle as routers for ground node communication. For this purpose, geographical clustering of ground nodes must be required. In this paper, we assume mobile ground nodes over wide area and the clusters composed of ground nodes are identified. UAVs can be positioned at the point of centroid of clusters. The number of UAVs are derived from the area size and the number of ground nodes deployed in that area. From the simulation and application of clustering algorithms, we showed visual clustering results with dynamic variance of number of ground nodes.

• Explosives and Blasting
• /
• v.22 no.1
• /
• pp.23-32
• /
• 2004

터널 발파를 원활히 수행하기 위해서는 암반조건에 적합한 합리적인 설계와 정밀한 천공, 정확한 기폭초시가 기본요소로서 이는 현재 국내 터널 설계.시공 기술 및 기자재의 발달로 만족할 만한 성과를 얻을 수 있다. 특히. 터널발파에서 정확한 기폭초시 부여는 굴진율 및 버럭 파쇄율, 굴착예정선 미려도, 잔여 암반 손상도 등의 시공성에서 뿐만 아니라 소음 및 진동 발생율을 좌우하는 환경적인 측면에서 매우 중요한 요소이다. 기폭요소는 최초 도화선을 활용한 공업뇌관에서 전기뇌관, 비전기식뇌관의 순으로 기폭안전성과 정밀성 면에서 눈부신 성장을 이룩하여 왔으며 특히, 90년대 초에 개발되어 전 세계적으로 최근까지 지속적으로 사용량이 급증하고 있는 전자뇌관은 기폭방식에 일대혁신을 이루었다. 전자기폭 시스템은 기존뇌관의 초시를 결정하는 화약성분의 지연요소 대신에 IC board(전자회로)에 의한 Digital timer로 신호를 발생하여 초시를 결정하는 방식이다. 본 논문에서는 국내 최초로 전자기폭시스템을 활용하여 2003년 9원 23일에서 동년 11월 2일까지 강원도 양구 지역의 $\bigcirc\bigcirc$터널에 전자뇌관을 이용한 시험발파를 실시하였고, 발파에 의한 진동 등을 조사하여 그 효율성을 검토하였다. 이를 위해 전자뇌관의 특성과 장점을 최대한 샅리기 위하여 각공을 발파하는 방식, 즉 1지발에 1공을 발파하는 방식을 채택하고 일반 뇌관과 전자뇌관으로 설계를 하여 각각의 발파효율을 비교하여 보았다. 그 결과 발파진동의 경우 기존뇌관을 이용하여 1공씩을 1지발로 발파를 한 경우에는 18~56%의 진동저감 효과가 있었고. 본선 설계에 의해 진행된 발파에 비하여는 최대 70% 이상의 진동저감 효과가 있는 것으로 나타났다.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2003.11a
• /
• pp.1151-1154
• /
• 2003

본 연구에서는 표면 돌출형태가 상이한 작업장 피로예방용 매트를 이용하여 선자세로 작업 시, 작업자의 생리적 반응을 통하여 매트사용에 따른 그들의 피로감의 변화를 알아보았다. 실험은 건강한 성인 남자 9명을 대상으로 EEG(Fp1, Fp2), ECG, EMG, SKT, 혈류량, 주관적 평가에 대하여 2종(WSM-PA3, WSM-PB3)의 표면 돌출형태가 상이한 피로예방용 매트에서 작업 전후 10분간과 작업 중 120분간 측정하였다. 작업은 단순반복의 수작업으로 실시하였다. 그 결과, WSM-PB3에 비하여 WSM-PA3 사용 시, $\alpha$파의 좌뇌 변동리듬 경사도와 쾌적도는 유의하게 증가(p＜0.05), RRI는 유의하게 감소(p＜0.05), 척추세움근의 주파수는 소폭으로 감소, 발등부의 피부온도는 유의하게 소폭으로 증가(P＜0.05), 하퇴 후면의 혈류량은 유의하게 증가(p＜0.05)하였다. 반면, 주관적 피로감 평가에서는 조건간 유의차가 나타나지 않았다. 이상의 결과에서 WSM-PB3에 비하여 WSM-PA3 사용이 선 자세로 반복작업하는 작업자의 피로예방에 긍정적 역할을 담당하는 것으로 나타났다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.498-500
• /
• 2015

본 논문에서는 검사 시간과 비용이 적게 드는 초음파 영상에서 결절종을 추출하는 방법을 제안한다. 제안된 방법은 초음파의 영상에서 퍼지 Stretching기법을 적용하여 명암 대비를 증가시킨 후, 8방향 윤곽선 추적 방법을 적용하여 결절종 후보 영역을 추출한다. 결절종이 형태학적으로 타원 형태를 가지는 정보를 이용하여 추출된 결절종 후보 영역에 침식과 팽창 기법을 적용하여 최종적으로 결절종 영역을 추출한다. 제안된 방법을 결절종 초음파 영상을 대상으로 실험한 결과, 결절종 영상에서 결절종 영역이 비교적 정확히 추출되었고 전문의가 결절종의 수술 여부를 분석할 수 있는 정보를 제공할 수 있는 가능성을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.10 s.101
• /
• pp.1003-1009
• /
• 2005

In this paper, small-size high-power single pole double throw(SPDT) switch with defected pound structure(DGS) is presented for wireless broadband internet application. To reduce the circuit size using slow-wave characteristic, the DGS is applied to ${\lambda}/4$ transmission line of the switch and the measured results are compared with them of conventional switch. To secure high degree of isolation, the switch with the DGS is composed of shunt-connected PIN diodes and shows insertion loss of 0.8 dB and isolation more than 50 dB at 2.3 GHz. The size of the switch is reduced about $50\%$ only with the DGS patterns while it has very similar performance to the conventional shunt-type switch.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.213-219
• /
• 2012

In this paper, we suggested the method of signal integrity for noises and distortion signal generated between high speed information transmission modules by external effects. Suggested method for signal integrity of impedance matching to remove transmission line distortion, We divided the impedance matching between the transmitter and the receiver module with the single line and differential line methods after confirmed the improvement of signal distortions through ADS simulation. the experimental results indicated that it is possible to keep signal integrity without signal distortions by matching the optimal termination impedance which are considering the signal delay of transmission line for using the high-performance modules.

• Journal of Korea Game Society
• /
• v.7 no.1
• /
• pp.53-58
• /
• 2007

In this paper, a game control system was constructed, in which a game was controlled by a remote joystick connected with a power line by the power line communication (PLC) method. The structure of the system was that the connection line between the remote joystick and a PC, and the PC and an audio play device was the home power line. And, the communication data rate between them was 2400 bps. The Polling communication technique was used for the PC to read the joystick's control commands, and to send some acoustic informations to the receiver PLC device. A game was programmed, in which an aircraft was moved according to the joystick's left, right, up, and, down direction, and was shooting its missile after the joystick's shooting button was pushed. The communication delay of about 100 msec between them didn't cause any big problem in playing the game.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.453-458
• /
• 1997

Many polymeric poly(vinyl chloride) membrane electrodes have been developed for the determination of basic drugs. But relatively little has been roported concerning the behavior of ligand free PVC memebranes. In connection with the evaluation of various ionophores, we bave evaluated a near-Nernstian response and selectivity of these ligand-free PVC electrodes towards basic drugs such as alverine, chlorpromazine and promazine. The electrode membranes were constructed with only several plasticizer and poly (vinyl chloride) matrix. The plasticizer studied were dioctyl phenylphosphonate, 2-nitrophenyl octyl ether, isododecyl phenylphosphate and dioctyl maleate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1744-1754
• /
• 1998

In this paper, the data service protocol which could support data service more efficiently between mobile host and fixed host in wire network is investigated. Wireless link has high bit error rate compared with wire link. Therefore, TCP performance for the data service is degraded in wire and wireless interworking environment. Thus, to reduce performance degradation. Interworking module withsimple protocol processing function is proposed. This, interworking module analyzes the hearder information of TCP fram. If received TCP freame is a duplicated frame, TCP frame is discared. Also, if interworking moudule receives retransmission request frame is a duplicated frame, TCP freme is discarded. Also, if interworking module receives retansmission request frame, interworking module performs retransmission procedure. According to simulation results, the proposed IWF shows better performance than traditional IWF in view of delay and throughput in the wire and wireless interworking environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.521-531
• /
• 2001

This paper presents the extraction scheme of the scattered waves by a target above the ground using the buried antenna in a lossy and dispersive medium. The half wave dipole antennas are used to transmit and to receive a signal. The transmission line model as a feeding model is considered to take into account the effect of transmission line in a real system. The ground is modeled by the 2nd order Debye approximation with the dispersion and loss. PLRC algorithm and DPML as absorbing boundary condition are utilized to apply the 2nd order Debye approximation to FDTD. To extract the scattered wave, in addition, we employed the delay time extraction algorithm. The simulations are conducted to observe the variation of magnitude in scattered wave and detection of target position according to the change of moisture content of the lossy medium.