• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.127-127
• /
• 2017

우리나라 음식물 폐기물은 수분함량 및 유기물 함량이 높기 때문에 부패와 악취, 침출수의 원인이 된다. 하지만 이를 혐기 소화 처리한다면 구성성분에 따라 60-80%가 생분해되어(한국유기성폐자원학회, 2001) 친환경적으로 처리가능하고, 혐기소화 결과물로 발생한 메탄가스를 대체에너지로 사용할 수 있어 유기물을 효과적으로 처리할 수 있다. 그러나 유기성 폐기물은 계절 및 지역에 따라 구성성분의 비가 다르며, 성분 중 지방 함량이 많을 때 바이오가스 생산이 지연되어 생산효율 감소의 주된 원인이 된다(Kafle and Kim, 2013). 전국음식물 폐기물 중 지방함량이 높은 어육류의 발생량은 3차 조사(환경부, 2008)에 비해 2배 이상 증가하였고, 향후 음식 섭취의 서구화로 인한 육류 소비가 증가할 것으로 예상된다(환경부, 2013). 따라서 본 연구는 지방함량이 높은 유기물의 효율적 처리를 위해 지방산 종류에 따라 포화 불포화 지방산을 포함하는 부산물의 혐기소화 능력 및 바이오가스 생산 성능을 구명하는데 목적이 있다. 본 연구 결과, 불포화 지방산 함량이 높은 수준인 부산물의 바이오가스는 629.96-749.14 mL/g VS 이며, 포화 지방산 함량이 높은 수준의 부산물은 560.18-715.43 mL/g VS 였다. 불포화 지방산 함량이 25.31%-46.26%로 많아질수록 초기 순응기간은 13일에서 25일로 증가하였고, 총 바이오가스 생산량의 90%가 생산되는 기간인 T90은 57일에서 72일로 증가하여 바이오가스 생산 속도가 감소한 것으로 판단된다. 포화 지방산은 함량이 24.10-48.74%로 증가할수록 초기 순응기간의 변화는 없었고, T90은 69일에서 62일로 감소하였다. 또한 불포화 지방산이 많은 유기물은 모두 바이오가스 생산 과정에서 2단계의 지연현상을 보였지만, 포화지방산은 함량이 증가하여도 1단계의 지연현상을 보였다. 이러한 차이는 두 지방산에 관여하는 미생물의 차이(Diana, 2007)와 불포화 지방산의 굴곡된 형태가 지방산과 미생물이 상호 작용 방식에 악영향 미치기 때문으로 판단된다(Diana, 2013). 결론적으로, 두 지방산의 소화 방식은 차이가 있으며, 불포화 지방산 함량이 많은 유기물은 탄수화물 함량이 많은 유기물을 10% 이상 혼합하여 지연상을 감소시킬수 있다(Kim, 2017). 포화 지방산 함량이 많은 유기물은 초기 지연 현상 해결을 위한 연구가 추가적으로 요구된다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.1024-1030
• /
• 1999

IEEE 1149.1 바운다리스캔은 보드 수준에서 고장점검 및 진단을 위한 테스트 설계기술이다. 그러나, 바운다리스캔 제어기의 특성상 테스트 패턴의 주입에서 관측까지 2.5 TCK가 소요되므로, 연결선상의 지연고장을 점검할 수 없다. 본 논문에서는 UpdateDR 신호를 변경하여, 테스트 패턴 주입에서 관측까지 1 TCK가 소요되게 함으로써, 지연고장 점검을 가능하게 하는 기술을 소개한다. 나아가서, 정적인 고장점검을 위한 테스트 패턴을 개선해 지연고장 점검까지 가능하게 하는, N개의 net에 대한 2 log(n+2) 의 새로운 테스트패턴도 제안한다. 설계와 시뮬레이션을 통해 지연고장 점검이 가능함을 확인하였다.Abstract IEEE 1149.1 Boundary-Scan is a testable design technique for the detection and diagnosis of faults on a board. However, since it takes 2.5TCKs to observe data launched from an output boundary scan cell due to inherent characteristics of the TAP controller, it is impossible to test delay defects on the interconnect nets. This paper introduces a new technique that postpones the activation of UpdateDR signal by 1.5 TCKs while complying with IEEE 1149.1 standard. Furthermore we have developed 2 log(n+2) , where N is the number of nets, interconnect test patterns to test delay faults in addition to the static interconnect faults. The validness of our approach is verified through the design and simulation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.33-43
• /
• 2012

Digital signage is referred to as a smart electronic display system that delivers multimedia-based information and advertisements to customers. Typically, the digital signage starts its playback after downloading a list of multimedia contents from network storage to its local disk. However, a way of downloading the entire contents before its playback entails a long initial delay time. In this paper, we formulate a problem of the initial delay time and provide a solution to compute a minimally demanded initial delay time according to a given network bandwidth and qualities/sizes of the multimedia contents. In addition, we analyze the performance of the proposed solution with various multimedia contents on digital signage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.5
• /
• pp.225-231
• /
• 2002

This paper proposes a discriminative collision resolution scheme for the wireless Medium Access Control (MAC) protocols to support the Quality of Service (QoS) requirements of real-time applications. Our scheme deals with access requests in different ways depending on their delay requirements. In our scheme, a Collision Resolution Period (CRP) is used to quickly resolve collisions for the delay sensitive traffic in order to support their delay requirements. Performance analysis and simulation results show that our algorithm may successfully meet the delay requirements of real time applications by reducing access delays and collisions.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.5
• /
• pp.241-249
• /
• 2003

Carry lookahead(CLA) circuitry of decimal adders is proposed aiming at delay reduction. The truncation error in calculation of monetary interests may accumulate yielding a substantial amount of errors. Binary Coded Decimal(BCD) additions. for example, eliminate the truncation error in a fractional representation of decimal numbers. The proposed BCD carry lookahead scheme is aiming at the speed improvements without any truncation errors in the addition of decimal fractions. The delay estimation of the BCD CLA is demonstrated with improved performance in addition. Further reduction in delay can be achieved introducing non-weighted number system such as the excess-3 code.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.2
• /
• pp.159-164
• /
• 2010

This paper focuses on the stability analysis and stabilization for networked control system with neutral type of time-delay. By utilizing the delay partitioning idea, new stability criteria are proposed in terms of linear matrix inequalities(LMIs). These conditions are developed based on the Lyapunov-Krasovskii functionals. Based on the derived criteria, a sufficient condition for te solvability of this problem is obtained in terms of linear matrix inequality without decomposing the original system matrices. Also, it is shown that the proposed controller design method is general for networked control systems. Finally, illustrative examples are presented to show the applicability of the proposed method.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.437-442
• /
• 2005

The measurement of RTT (Round Trip Time) can be used for the analysis of Internet congestion. However, simple measuring of RTT which measures only hun around time of a packet can not infer a packet forward/backward delay variation. In this thesis, we present a new algorithm which can be used for the estimation of forward/backward delay variation of packets. These delay variations are implication of network congestion state. In this algorithm, the reference forward/backward delay can be determined based on the minimum RTT value. The delay variation of each packet can be calculated by comparing reference delay with the packet delay. We verified our proposed algorithm by NS-2 simulation and delay measuring in a real network.

• The KIPS Transactions:PartC
• /
• v.10C no.6
• /
• pp.711-716
• /
• 2003

We propose a new Interet time synchronization model using danamic linear model and introduce the characteristics of internet transmission delays. SNTP(Simple Network Time Protocol) has been widely used as a time synchronization method on the Internet. While SNTP provides a very simple usage, SNTP may not provide the stable services, since SNTP does not consider the several essential error factors. In order to overcome the instabitily of SNTP, we analyze the process of time estimation of SNTP and find the difference between forward transmission delay and backward transmission delay operates the main error on the estimation of an time offset.

• Journal of Navigation and Port Research
• /
• v.26 no.3
• /
• pp.295-302
• /
• 2002

Currently digital communication system adapt various digital modulation schemes. All these communication systems are required to cause the minimum interference to adjacent channels, they must therefore employ the linear power amplifiers. In respect to linear power amplifiers, there are many linearization techniques. Feedforward power amplifier represent very wide bandwidth and high linearization capability. In the feedforward systems overall efficiency is reduced due to the loss of delay line. In this paper, delay filter instead of transmission delay line adapted to get more high efficiency. Experimental results showed that ACLR has improved 17.04dB which is added 2.54dB by using the delay filter.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.6
• /
• pp.277-281
• /
• 2006

This paper presents a method for the automatic recognition of pitch accents over syllables. The method that we propose is based on the time-delay recursive neural network (TDRNN). which is a neural network classifier with two different representation of dynamic context: the delayed input nodes allow the representation of an explicit trajectory F0(t) along time. while the recursive nodes provide long-term context information that reflects the characteristics of pitch accentuation in spoken English. We apply the TDRNN to pitch accent recognition in two forms: in the normal TDRNN. all of the prosodic features (pitch. energy, duration) are used as an entire set in a single TDRNN. while in the distributed TDRNN. the network consists of several TDRNNs each taking a single prosodic feature as the input. The final output of the distributed TDRNN is weighted sum of the output of individual TDRNN. We used the Boston Radio News Corpus (BRNC) for the experiments on the speaker-independent pitch accent recognition. π 1e experimental results show that the distributed TDRNN exhibits an average recognition accuracy of 83.64% over both pitch events and non-events.