• Journal of the Korean Geotechnical Society
• /
• v.34 no.6
• /
• pp.25-36
• /
• 2018

Soil liquefaction is one of the types of major seismic damage. Soil liquefaction is a phenomenon that can cause enormous human and economic damages, and it must be examined before designing geotechnical structures. In this study, we proposed a practical method of developing a multi-hazard fragility surface for liquefaction of levee considering earthquake magnitude and water level. Limit state for liquefaction of levee was defined by liquefaction potential index (LPI), which is frequently used to assess the liquefaction susceptibility of soils. In order to consider the uncertainty of soil properties, Monte Carlo Simulation based probabilistic analysis was performed. Based on the analysis results, a 3D fragility surface representing the probability of failure by soil liquefaction as a function of the ground motion and water level has been established. The prepared multi-hazard fragility surface can be used to evaluate the safety of levees against liquefaction and to assess the risk in earthquake and flood prone areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.120-120
• /
• 2019

국내에서는 예측 불가능한 재난으로 인한 침수 피해 발생사례가 증가하였다. 따라서 침수 피해 예측이 더욱 중요해지고 있는 실정이다. 기존에는 주로 수치모형을 통한 침수예측을 하였고, 정보통신기술도 발달해왔지만 아직까지 수치모의에 많은 시간이 소요되기 때문에 침수 피해의 실시간 예측이 힘든 상황이다. 이에 국립재난안전연구원(2017)에서 침수예측을 위한 보간 모델인 SIND(Scientific Interpolation for Natural Disaster) Model을 개발하였다. 이는 보간을 이용한 모델이기 때문에 그동안 사용해왔던 물리 모형보다 간단하다. 그러나 정확한 값이 아닌 보간을 이용한 모델이기 때문에 정확도를 검토할 필요가 있다. 따라서 본 연구에서는 Mapping분야에서 사용하는 CRITIC(CRiteria Importance Through Intercriteria Correlation) 기법을 활용하여 지도의 정확도 검토를 수행하였다. CRITIC은 형상기준, 위치기준, 면적기준을 이용하여 형상유사도를 산정하는 방법이며, 이 기법을 활용하여 국가가 제공한 침수예상도(국립해양조사원, 2010)와 SIND모델 결과 지도를 비교하였다. 형상기준은 지도의 형상을 나타내는 형상지수를 비교하고, 위치기준은 지도의 무게중심의 일치정도, 면적기준은 형상 면적을 비교하는 것이다. 지도는 총 300여개의 매칭 객체 쌍을 가지고 수행하였고, 위험도 등급은 Grade 1부터 Grade 5 까지 분류하여 나타내었다. 연구 대상지역은 ${{\bigcirc}{\bigcirc}}$시이다. 그 결과, 형상유사도는 약 200여개의 매체쌍이 0.80 이상의 값을 나타냈고, 나머지 매체 쌍은 0.75이하의 값을 나타내었다. 위험도 등급이 낮을수록 형상유사도 값은 크게 나타나고, 위험도 등급이 높을수록 형상유사도 값이 작게 나타나는 경향을 보였다. 이는 위험도 등급이 높은 곳의 경우, 해안선의 복잡한 지형형태 때문으로 판단된다. Mapping 분야에서 형상유사도 적합성 기준이 0.75이므로 결과는 60%이상이 정확하다고 판단할 수 있다. 따라서 본 연구에서 검토를 수행했던 간단한 방정식을 이용한 SIND 모델은 정확하다고 판단할 수 있다. 다만, 복잡한 지형과 현재 고려되고 있는 영향인자 외에 다양한 구조물 등을 고려한다면 형상유사도가 향상될 것이라 기대된다.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.85-97
• /
• 2021

In this paper, in order to support rapid and effective decision-making and response in disaster situations, we identified the author's organization of academic research papers and conducted a collaborative relationship analysis study based on this. For this purpose, 2,308 papers in 69 Korean academic journals classified by disaster and safety type were selected for analysis and experimental data were constructed based on the Korea Science Citation Database (KSCD) and institutional identification data provided by KISTI. Collaborative relationship analysis was conducted for each of the four units (Institution, Institution type, Institution region and University department type). First, statistical status such as frequency of appearance was compared, and basic properties and main centrality index of each co-occurrence network were calculated and analyzed using Social Network Analysis Method. In addition, a visualization map was created and presented for each network so that the collaborative relationship could be viewed and understood as a whole. The results of this study are expected to contribute to the search activities of institutions and cooperative groups that support effective disaster response and to lay the foundation for the information service system.

• Korea Trade Review
• /
• v.48 no.4
• /
• pp.121-148
• /
• 2023

The rapid melting of Arctic sea ice has increased interest in the Northern Sea Route (NSR) as a viable alternative trade route between Europe and Asia. While extensive research has examined its competitiveness in terms of technical feasibility, safety, profitability, and environmental impact, the topic of the NSR ports remains relatively underrepresented in the literature. Hence, this study aims to contribute to the existing research by assessing the efficiency of 17 NSR ports to gain insights into their operations and identify areas for improvement using models of Data Envelopment Analysis(DEA). The obtained results show that efficient ports mainly belong to the western NSR region, with ports like Murmansk and Varandei consistently demonstrating high efficiency and constant returns to scale. Several ports, such as Onega, Arkhangelsk, Naryan-Mar, and Khatanga, showed inefficiencies in the utilization of berths and quay lengths. The findings not only contribute to academic knowledge but also offer practical implications for NSR port authorities, assisting them in making well-informed decisions regarding infrastructure development plans.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.1
• /
• pp.127-134
• /
• 2024

With the growth of offshore wind power generation market, the corresponding installation vessel market is also growing. It is anticipated that approximately 100 installation vessels will be required in the of shore wind power generation market by 2030. With a price range of 300 to 400 billion Korean won per vessel, this represents a high-value market compared to merchant vessels. Particularly, the demand for large installation vessels with a capacity of 11 MW or more is increasing. The rapid growth of the offshore wind power generation market in the Asia-Pacific region, centered around China, has led to several discussions on orders for operational installation vessels in this region. The seabed geology in the Asia-Pacific region is dominated by clay layers with low bearing capacity. Owing to these characteristics, during vessel operations, significant spudcan and leg penetration depths occur as the installation vessel rises and descends above the water surface. In this study, using penetration variables ranging from 3 to 21 m, the unique vibration period, structural safety of the legs, and conductivity safety index were assessed based on penetration depths. As the penetration depth increases, the natural vibration period and the moment length of the leg become shorter, increasing the margin of structural strength. It is safe against overturning moment at all angles of incidence, and the maximum value occurs at 270 degrees. The conditions reviewed through this study can be used as crucial data to determine the operation of the legs according to the penetration depth when developing operating procedures for WTIV in soft soil. In conclusion, accurately determining the safety of the leg structure according to the penetration depth is directly related to the safety of the WTIV.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.522-527
• /
• 1997

To find out the optimum seeding rate in corrugated water seeded rice, field experiment was carried out at Yeongdeog Substation of the National Yeongnam Agricultural Experiment Station for two years, 1994 and 1995. A rice cultivar Donghaebyeo, was seeded on May 15 with five seeding rate from 3kg /10a to 7kg /10a. The number of seedling stand per unit area was curvilinearly increased with seeding rate. In characteristics of rice plant associated with lodging, the plant height, fresh weight per tiller, Culm wall thickness and ratio of gravity center were not significantly different among seeding rates, but the breaking strength of 4th internode was slightly decreased with increasing seeding rate and thus, lodging index was generally greater at higher seeding rate than lower seeding rate. Field lodging was observed at 1~3 degree in seeding rate of 5~7kg /10a. Panicle number per unit area was generally increase with increase of seeding rate, while ratio of ripened grain was decreased with increase of spikelet number. Milled rice yield was curvilinearly increased with seeding rate. The optimum seeding rate in the highest rice yield was 4.8kg /10a in 1994, and 4.3kg /a in 1995, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.135-143
• /
• 2008

An emergy concept was used to evaluate the environment and economy of the estuarine areas of Yeongsan River, Seomjin River, and Han River in Korea. The emergy evaluations clearly showed ecological and socioeconomic characteristics of the estuarine areas that act as ecological and economic centers of surrounding areas. River, tide, and rain provided most of the renewable emergy inputs to the estuarine areas with their contribution to the total emergy input less than 8%. The estuarine areas mostly relied for their operation on the purchased emergy which accounted for $92{\sim}98%$ of the total emergy input to the systems. Emergy indices such as emergy use per unit area, population carrying capacity, environmental loading ratio, and emergy sustainability index revealed that the estuarine areas of Yeongsan River, Seomjin River, and Han River are not sustainable at the current level of economic activities in the areas. The ecological economic values of the environment of the areas were in the range of $7.29{\sim}22.06$ million Em\/ha/yr. They are more than twice that for the whole country, indicating the ecological and economic importance of the eatuarine areas. It is, therefore, urgent to establish and implement estuarine management policies to protect and restore the ecological and economic potentials of the estuarine areas of Yeongsan River, Seomjin River, and Han River. Management plans for the estuarine areas should include both demand-side measures such as reduction of population and economic concentration and consideration of ecological carrying capacity in planning stages for utilization and development of the areas, and supply-side ones such as restoration of degraded ecosystems and construction of new productive ecosystems.

• The Journal of the Korea Contents Association
• /
• v.22 no.1
• /
• pp.274-282
• /
• 2022

In order to secure pedestrians' right to walk, we have up-cycled second hand mobile phones to overcome limitations of the existing survey methods, analysis methods, and diagnosis to reduce pedestrian traffic accidents. Second hand mobile phones were up-cycled to produce mobile CCTVs and installed in areas where pedestrian deaths rate is high to secure image data sets for the period of more than 24 hours. It was analyzed by applying image visualization technology and clouding reporting technology, and more precise and accurate results were derived through modeling based on artificial intelligence learning and GIS-based diagnostic guidance. As a result, it was possible to analyze the risk factors and number of pedestrian safety, and even factors that were not known in the existing method could be derived. In addition, the traffic accident risk index was derived by converting data into one year to verify whether second hand mobile phone up-cycling mobile CCTV will be an objective tool for finding pedestrian risk factors. Up-cycling mobile CCTV of second hand mobile phones newly applied through research can be used as a new tool to find pedestrian risk factors, and it can be used as a service to protect the safety of the traffic vulnerable other than pedestrians.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.507-522
• /
• 2021

Specific survey objectives often cannot be met using only one geophysical method, as each method's results are influenced by the specific physical properties of subsurface materials. In particular, areas susceptible to geological hazards require investigation using more than one method in order to reduce risks to life and property. Instead of analyzing the results from each method separately, this work develops a four-quadrant criterion for classifying areas of levees as safe or weak. The assessment is based on statistically determined thresholds of seismic velocity (P-wave velocity from seismic refraction and S-wave velocity from multichannel analysis of surface waves) and electrical resistivity. Thresholds are determined by subtracting the standard deviation from the mean during performance testing of this correlation technique applied to model data of four horizontal and inclined fracture zones. Compared with results from the crossplot of resistivity and P-wave velocity, crossplot analysis using resistivity and S-wave velocity data provides more reliable information on the soil type, ground stiffness, and lithological characteristics of the levee system. A loose and sandy zone (represented by low S-wave velocity and high resistivity) falling within the second quadrant is interpreted to be a weak zone. This interpretation is well supported by the N values from standard penetrating test for the central core.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.11
• /
• pp.5-13
• /
• 2021

The interest of expecting the liquefaction damage is increasing due to the liquefaction in Pohang in 2017. Liquefaction is defined as a phenomenon that the ground can not support the superstructure due to loss of the strength of the ground. As an alternative against this, many studies are being conducted to increase the precision and to compose a liquefaction hazard map for the purpose of identifying the scale of liquefaction damage using the liquefaction potential index (LPI). In this research, in order to analyze the degree of precision with regard to spatial interpolation objects such as LPI value and geotechnical information for LPI determination, liquefaction hazard map were made for the target area. Furthermore, based on the trend of precision, probability value was analyzed using probability maps prepared through qualitative characteristics. Based on the analysis results, the precision of the liquefaction hazard map setting the spatial interpolation object as geotechnical information is higher than that as LPI value. Furthermore, the precision of the liquefaction hazard map does not affect the distribution of the probability value.