• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.92-100
• /
• 1993

1.8 기능성 색소 1.8.1 pH 지시약 수용액 중의 수소 이온 농도 [H$\^$+/]([]는 농도를 의미한다)를 간단하게 조사하기 위해 pH지시약을 이용하고 있다. 지시약은 일반적으로 유기약산이라든지 약염기로 용액의 pH에 의존하여 수소 이온(프로톤)이나 수산화물 이온이 부가된다든지 탈리 한다든지하여 색이 변화한다. [H$\^$+/]의 값은 작기 때문에 pH = -log[H$\^$+/]의 값으로 표시하며, pH 지시약에 담근 시험지나 pH meter로 측정한다. 예를 들면 페놀프탈레인은 무색의 약산으로 [HIn]으로 표시된다. 그 수용액은 조금만 전리하며, 그 공역 염기 [In$\^$-/]은 적색을 띈다.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.203-207
• /
• 1989

The methyl red stock solution was added to sample solution and the absorbance values of this solution were measured at the maximum absorption wavelengths of the acidic form, the basic form, and the isosbestic point of the indicator. From the measurements of absorbance, the pH of this solution was calculated. The range of absorbance at the isosbestic point was maintained within 0.1 ${\sim}$ 0.3. The error of pH measurement was within ${\pm}0.08$ pH unit in the pH range of sample solution of $pK_I{\pm}1$.

• Analytical Science and Technology
• /
• v.34 no.3
• /
• pp.128-133
• /
• 2021

During titration, several chemical reactions result in changes not only in the potential of chemicals, but also in the colors of the indicator. In a potentiometric titration, a titration curve is obtained by measuring the abrupt change in the potential at the endpoint. Generally, acid-base titration is performed by observing the color change caused by an indicator to determine the endpoint. The method of determining the endpoint by measuring the potential difference has been well established and commercialized; however, the devices that can obtain the endpoint by observing the color change are limited. Consequently, in this study, a simple and precise spectral endpoint detector was manufactured using a drop-counter comprising an infrared emitter and a phototransistor, a white light LED as the light source and photodetector, and an analog-to-digital converter (Arduino). Spectrator, a new named, showed excellent results in terms of the reproducibility of acid-base titration using thymol blue as an indicator. Herein, we present the results of the Spectrator-manufacturing process as well as the experimental results.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.41-43
• /
• 1976

The dissociation constant of phenol red indicator in mixed solvents was studied. Methanol and ethanol were employed as solvents and studied the changes of pK values of indicator according to the kind and concentration of organic solvent which is mixed into water solution. The effect of methanol solvent on pK is negligible at 40%, 60% and 80% mixing. While in the case of ethanol, the effect of above 40% mixing is not negligible.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.6
• /
• pp.793-801
• /
• 2004

A passive sampler has been developed for measuring formaldehyde in air using methyl yellow and methyl orange indicator. It is based on the color change of the TLC plate on reaction with formaldehyde. TLC plates impregnated with three kinds of solutions containing methyl orange, methyl yellow, mixing of methyl yellow and methyl orange were shown rectilinear response to formaldehyde concentration at constant exposure time. The color change of impregnated TLC plate with criteria air pollution, such as NO$_2$, SO$_2$, CO, $O_3$ was investigated. The color change of TLC plate with $O_3$ is larger than other gases.

• Journal of the Korean Chemical Society
• /
• v.13 no.4
• /
• pp.313-316
• /
• 1969

In this paper a simple and rapid method is described for the determination of lead in monazite. A monazite sample was dissolved with hot concentrated sulfuric acid and diluted to 200 ml with distilled water. Lead is quatitatively separated by coprecipitating with strontium. Lead-strontium sulfate is dissolved in 3N NaOH soluion. An excess Zn-EDTA is added. The remaining zinc ion is titrated with standard 0.01 M EDTA solution using xylenol orange as indicator at pH 5 in the presence of KCN and acetyl acetone as masking agents.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.32-36
• /
• 1976

The pH titration curves of ampicillin, amoxicillin and cephalexin in aqueous acetone, ethanol and N, N'-dimethylformamide by use of 0.02N-KOH solution showed that 80% acetone was the most effective solvent for alkali titration of them. The pH jumps of samples in 80% acetone were sharp enough to determine the contents of them by use in 80% acetone (9, 4) was coincided with each equivalent point of ampicillin, amoxicillin and cephalexin, but those of phenolphthalein, thymolphthalein, thymol blue and bgrom cresol purple were not. The color change of brom thymol blue at equivalent points was very clear except the case of amoxicillin that the determination of smaples in 80% acetone with 0.02 N-KOH solution by the aid of brom thymol blue could be available.

• Journal of Environmental Health Sciences
• /
• v.1 no.1
• /
• pp.32-35
• /
• 1974

Acidic substances contained in asphalt are affect upon emulsitiability of asphalt and its adhesion with aggregates, and therfore, detemination of acidity of asphalt is of important one. However, there has not been established a method of precisely determining the acidity of asphalt. This paper reports on an improved color-indicator titration method, by which the acid number of asphalt is determined. By treating benzene solution of asphalt with alcohol, acidic constituents were selectively extracted into alcohol solution, while asphaltic matters precipitated. A color-indicator titration method then was applied to the resultant faint-colored solution. The change of color at end point was clearly observed, and the results were obtained with good reproductivity and checked well with the results by the I.P. 177/64 method. Alcohols having not more than three cabon atoms have been found suitable for extraction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.5
• /
• pp.754-760
• /
• 1996

Selective media for isolation and enumeration of lactic acid bacteria from kimchi were compared using 36 strains of lactic acid bacteria from kimchi and dairy products. Among the selective media, KF Streptococcus agar showed the best result for the selection of Enterococcus group and Pediococus group, and M-17 agar with pH indicator for Lactococcus group, the m-LBS agar for Lactobacillus group, and PES-3 agar for Leuconostoc group.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.60-67
• /
• 2010

Although several studies have reported that Cr, Cu and As can leach from CCA-treated woods, few studies have been conducted on this topic in Korea. Therefore, this study was conducted to monitor Cr, Cu and As leaching from CCA-treated wood products and to develop a rapid identification method for CCA-treated wood products by using indicators such as PAN stain. Soil samples were collected at depths of 0-70 cm and wood samples were collected by thickness of wood layer. The soil and wood samples were then digested and analyzed for Cr, Cu and As concentrations using an atomic absorption spectrometer. The As and Cu concentrations decreased sharply with depth from 34.38 and 33.65 mg $kg^{-1}$ at 0-1 cm to 1.72 and 7.84 mg $kg^{-1}$ at 70 cm, respectively. In general, As was more mobile than Cr and Cu in the soil. For wood samples, the Cr, Cu and As concentrations were higher in the outer layer (0-0.5cm) than the inner layers (0.6-4.5cm). Evaluation of rapid identification methods revealed that 100% acetone with 0.1% PAN indicator was the best combination for detection of CCA-treated wood in the field.