• Journal of Korean Society of Forest Science
• /
• v.94 no.6
• /
• pp.488-495
• /
• 2005

This study was conducted to understand the influences of forest structure on throughfall, stemflow and interception loss. The study plots included the natural old-growth deciduous, Pinus koraiensis and Abies holophylla forests in Gwangneung and the rehabilitated young mixed forest in Yangju, Gyeonggido. The Pinus koraiensis and Abies hotophylla had been planted in 1976. The rehabilitated young mixed forest had been established to control erosion in 1974. Total and net rainfall were monitored from March, 2003 to October, 2004. Tipping bucket rain gauge recorded total rainfall. Throughfall and stemflow were measured by custom-made tipping bucket and CR10X data logger at each $10m{\times}10m$ plots at intervals of 30 minutes. Interception loss in the Pinus koraiensis plot were most as 37.2% of total rainfall and least as 22.6% in the rehabilitated young mixed forest. Stemflow in the rehabilitated young mixed forest was 10.7% of total rainfall and stemflow in the Pinus koraiensis plot was 2.4%. The average throughfall ratio ranged from 66% to 77% depending on the canopy coverage. The relationship of stemflow and total rainfall represented in a linear regression equation though the variation of data was large. The ratio of stemflow-conversion was 2% of total rainfall in the Pinus koraiensis plot and 12% in the rehabilitated young mixed forest, respectively. The stem storage of the natural old-growth deciduous was the largest of 0.21 mm whereas that of the Pinus koraiensis plot was the least of 0.003 mm. A deciduous forest produced stemflow more than a coniferous forest due to a smooth bark and steeply angled branches. Interception loss of all study plots increased linearly as total rainfall increased. The distribution of interception loss data related in total rainfall became wider in a deciduous forest than a coniferous. It resulted from seasonality of leaf area index in a deciduous forest. As considered above results, it was confirmed that there were great differences of throughfall, stemflow and interception loss depending on forest stand structures. The simulation model for predicting interception loss must have parameters such as forest stand characteristics and LAI in order to describe the influence of forest structure on interception loss.

• Geophysics and Geophysical Exploration
• /
• v.18 no.3
• /
• pp.125-132
• /
• 2015

The water saturation ($S_w$), which is very important to estimate hydrocarbon reserves in the reservoir, has been determined from resistivity index (RI) by using the Archie's formula. However, in many cases, it has been reported that n is not constant for a given formation and it could be varied with water saturation. In addition, it frequently happens that the line obtained by linear regression analysis on log-log scale does not pass through the origin. In order to overcome these drawbacks, we suggested a modified Archie's formula, which can handle almost all the RI vs. $S_w$ cross-plots whether the trend is straight or curved and whether it passes through the origin or not. We also demonstrated that how to determine conductivity exponent ${\mu}$, critical water saturation $S_c$, and saturation distribution factor b in the laboratory to use the modified Archie's formula. Since the modified Archie's formula takes into account pore structure, pore water distribution, and wettability of reservoir such as clean sandstone and carbonate rocks, it might improve field applicability.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.493-498
• /
• 2014

The objective of this study was to make growth and yield models for common ice plant (Mesembryanthemum crystallinum L.) using expolinear functional equations in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-hours photoperiod were used, and the light intensity was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Nutrient film systems with three layers were used for plant growth. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Leaf area, shoot fresh and dry weights, light use efficiency of common ice plant as function of days after transplanting, accumulative temperature and accumulative radiation were analyzed. Leaf area, shoot fresh and dry weights per area were described using an expolinear equation. A linear relationship between shoot dry and fresh weights was observed. Light use efficiency of common ice plant was $3.3g{\cdot}MJ^{-1}$ at 30 days after transplanting. It is concluded that the expolinear growth model can be a useful tool for quantifying the growth and yield of common ice plant in a closed plant production system.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.315-324
• /
• 2016

Because of a fissility characteristics of shale in the Gyoungsang super-group, it breaks down to debris when daylighted by construction work and causes a slope unstability. To assess the durability property of shale, a series of slake durability tests was conducted by controlling test conditions such as shape of specimen, number of specimen, revolution speed, revolution number, drying temperature and pH of submerging liquid. For the specimen shape, cube one showed relatively lower durability index than cuboid and/or fan shape one. The test with the more number of specimens showed the less durability index because of a higher friction among specimens in the drum. The durability index is linearly decreased by increasing the total number of revolution, while the revolution velocity could not affect the index. And the durability index is also decreased by increasing the drying temperature of specimen and by decreasing the pH of submerging liquid. Because the durability index of shale is almost similar to that of crystalline rocks, the disintegration characteristics of shale could not be assessed by the slake durability test recommended by ISRM, and thus a new test method by changing the total revolution number may be required for the shale having fissility characteristics.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.192-197
• /
• 1989

Two sweet corn hybrids, 'Tanok l' and 'Golden Cross Bantam 70 (GCB 70)' were grown at five plant densities, of 4, 167. 5,556, 6,667. 8, 333, and 11, 111 plants per 10 ares, with or without tiller removal, to determine effects of tiller removal on growth and yield of sweet corn hybrids at various plant densities. Tillers were pulled when less than 15 cm tall. The number of tillers per plant linearly decreased as plant density increased. The two hybrids had similar plant height, ear length and diameter, ear weight and the number of ears per plant and 10 ares. Tanok 1 lodged approximately 20％ at above 8,333 plants per 10 ares, while GCB 70 did not lodge at all, at any plant density. Tanok 1 had higher leaf area index (LAI), ear and stover yields than GCB 70. Except for root lodging and LAI, hybrid x plant density interaction was not significant at 5％ probability level. Plant density did not affect silking data. Increasing plant density linearly increased plant height, LAI, and stover yield, but linearly decreased ear length, ear weight, and the number of ears per plant. Increase in LAI was greater in Tanok 1 than in GCB 70, with increasing plant density. The relationships between the number of ears and ear yield per 10 ares and plant density were Quadratic. The optimum plant density was estimated to be approximately 6500 plants per 10 ares, using the equation based on ear yield. Except for ear height and LA I, hybrid x tiller removal and plant density x tiller removal interactions were not significant. Hybrid x plant density x tiller removal interaction was not significant for any characters. When averaged over hybrids and plant densities, tiller removal reduced plant height and ear and stover yields by about 3, 10, and 16％, respectively, but did not significantly affect silking date, root lodging, ear length and diameter and the number of ears per plant and per 10 ares. The results indicate that the optimum plant density is approximately 6500 plants per 10 ares, regardless of tiller removal and tillers are not to be removed at any plant density.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.311-324
• /
• 2016

The characteristics of the rock cleavage in Jurassic granite from Geochang were analysed. The evaluation for three quarrying planes and three rock cleavages was performed using the parameters such as (1) reduction ratio between the value of spacing and the value of length, (2) microcrack spacing frequency(N), (3) total spacing($1mm{\geq}$), (4) exponential constant(a), (5) magnitude of exponent(${\lambda}$), (6) mean spacing($S_{mean}$), (7) difference value($S_{mean}-S_{median}$) between mean spacing and median spacing($S_{median}$) and (8) density of spacing. Especially the close dependence between the above spacing parameters and the parameters from the spacing-cumulative frequency diagrams was derived. The discrimination factors representing three quarrying planes and three rock cleavages were acquired through these mutual contrast. The analysis results of the research are summarized as follows. First, the reduction ratios of frequency(N), mean value, median value, the above difference value($S_{mean}-S_{median}$) and density for three rock cleavages are in orders of G(grain, (G1 + G2)/2) < H(hardway, (H1 + H2)/2) < R(rift, (R1 + R2)/2), H < G $\ll$ R, H < G $\ll$ R, H < G < R and H < G $\ll$ R. The values of the above five parameters for three planes show the various orders of R'(rift plane) $\ll$ H'(hardway plane) < G'(grain plane), R' $\ll$ G' < H', R' < H' < G', R' < G' < H' and R' $\ll$ H' < G', respectively. Second, the values of (I) parameters(2, 3, 4 and 5) and (II) parameters(6, 7 and 8) are in orders of (I) H < G < R and (II) R < G < H. On the contrary, the values of the above two groups(I~II) of parameters for three planes show reverse orders. Third, to review the overall characteristics of the arrangement among the six diagrams, these diagrams show an order of R2 < R1 < G2 < G1 < H2 < H1 from the related chart. In other words, above six diagrams can be summarized in order of rift(R1 + R2) < grain(G1 + G2) < hardway(H1 + H2). These results indicate a relative magnitude of rock cleavage related to microcrack spacing. Especially, two parameters for each diagram, the above difference value($S_{mean}-S_{median}$) and mean spacing, could provide advanced information for prediction the order of arrangement among the diagrams. Finally, the general chart for three planes and three rock cleavages were made. From the related chart, three exponential straight lines for three rock cleavages show an order of R(R1 + R2) < G(G1 + G2) < H(H1 + H2). On the contrary, three lines for three planes show an order of H'(R2 + G2) < G'(R1 + H2) < R'(G1 + H1). Consequently, correlation of the mutually reverse order between three planes and three rock cleavages can be drawn from the related chart.

• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.387-396
• /
• 1999

The retention behavior of Cot(II)-dithiocarbamate(DTC) chelates in reversed phase high performance liquid chromatography was investigated. Enthalpy and entropy of chelates transfer from the mobile phase to the stationary phase were calculated from retention data using van't Hoff plots. The dependence of In k' on enthalpy was decreased with increasing organic solvent ratio on the mobile phase. The compensation temperatures(${\beta}$) calculated from the slope of $-{\Delta}H^0$ vs In k' were in the range of 756.3-888.5 K. From these results. it was found that the retention mechanism of DTC chelates was invariant under the various temperatures and was largely affected by the solvophobie effect. Liniear relationship between S index and log k' in emprical retention equation, $log\;k^{\prime}=log\;{k_w}^{\prime}-S_{\varphi}$ showed that S index was influenced mainly by the interaction between DTC chelates and the mobile phase.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.2
• /
• pp.269-280
• /
• 1995

저작은 교합과 악운동 뿐만 아리라 근신경계, 고위 중추까지 복합적으로 관여하는 기능적 행위이다. 교합 양상은 다양하게 저작 형태에 영향을 끼치며 저작 효율에도 관여한다. 저작 형태는 다양한 모양을 가지나 두가지 전형적인 군 즉, 전방에서 관찰시 그 양상이 수직적이며 chopping운동을 닮은 군과 저작 형태가 주로 측방으로 이루어지며 grinding을 하는 군으로 나눌 수 있다. 본 연구의 목적은 저작 형태의 치아가 교합접촉 및 저작 효율에 미치는 영향을 고찰해 보고자 하는 것이다. 하악운동궤적기록기를 이용하여 정상교합을 가진 치과대학생중 전형적인 2가지 저작형태를 보이는 각 10명씩을 피검자로 선택하였다. 3가지 하악위 즉, 중심위, 작업측 비작업측에서의 교합접촉을 고무형 교합인기재로 기록하여 천공부의 직경이 1mm이하면 1점, 1-2mm또는 직선상이면 2점, 2mm이상이면 3점으로 평가하여 각 점수의 합으로 좌우 소구치 및 대구치의 접촉 지수를 측정하였다. 저작 효율을 평가하기 위해 땅콩 3g(${\pm}0.01g$)을 20회 저작하게 한 후 3회 입을 헹구어 뱉게 하였다. 체눈 크기가 각 0.425, 0.60, 0.85, 2.0, 4.0인 체에 거른 후 $65^{\circ}C$로 오븐에서 세시간 말려 무게를 측정하고 중심 크기$(M_{50})$과 저작효율치(R)를 계산 비교하여 다음과 같은 결론을 얻었다. 1. Chopping형은 grinding형에 비해 중심위에서 더 넓은 교합접촉을 보였다(P<0.01). 2. Grinding형은 chopping형에 비해 측방위에서 더 넓은 교합접촉을 보였다(P<0.01). 3. Chopping형은 중심크기($(M_{50})$)과 저작효율치(R)로 비교하였을 때 더 좋은 저작 효율을 보였다(P<0.01).

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.646-650
• /
• 1990

To develop a new form of spice material by concentration of garlic juice, its rheological properties were investigated. In the temperature range of $15\;to\;65^{\circ}C$, the garlic juice with the solid content of $32\;to\;60^{\circ}Brix$ was considered as a pseudoplastic fluid. Flow and consistency indices of the juice interpreted by power-law equation varied from $0.9937\;to\;0.6130\;and\;0.0041\;to\;3.1886Pa{\;s^n$, respectively. Apparent viscosity was lineally decreased as shear rate was increased. Activation energy for the flow of the garlic juice changed in the range of 11,216 to 23,195 kJ/kg mol.