• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2021

Onions are a representative produce that requires supply-demand control measures due to large fluctuations in production and price by growing season. Accurate forecasts of crop production can improve the effectiveness of such measures. However, it is challenging to obtain accurate estimates of crop productivity for onions because they are mainly grown on the open fields. The objective of this study was to perform the empirical analysis of the relationship between factors for crop growth and meteorological conditions, which can support the development of models to predict crop growth and production. The growth survey data were collected from open fields. The survey data included the weight of above ground organs as well as that of the bulbs. The estimates of meteorological data were also compiled for the given fields. Correlation analysis between these factors was performed. The random forest was also used to compare the importance of the meteorological factors by the growth stage. Our results indicated that insolation in early March had a positive effect on the growth of the above-ground. There was a negative correlation between precipitation and the growth of the above-ground at the end of March although it has been suggested that drought can deter the growth of onion. The negative effects of precipitation and daylight hours on the growth of the above-ground and under-ground were significant during the harvest period. These meteorological factors identified by growth stage can be used to develop models for onion growth and production forecast.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1995.04a
• /
• pp.53-54
• /
• 1995

식물공장의 생육환경 제어는 작물의 생장 프로세스에 대한 지식을 이용하여 시설 내부의 환경요인을 경제적 최적 상태로 구현하는 것으로, 이를 위해서는 작물 생장에 대한 생물학적 관점과 환경제어 시스템에 관련된 공학적 관점, 그리고 수확된 작물과 에너지 투입에 대한 경제적 관점이 동시에 고려되어야 한다. 본 연구는 식물공장의 지상부 환경에 대한 작물의 생장 모델과 환경제어에 소요되는 에너지 투입 모델을 바탕으로 하여, 효율적인 생육환경 제어 알고리즘을 개발하려는 목적에서 수행되었으며 그 과정 및 결과를 요약하면 다음과 같다. (중략)

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.597-601
• /
• 2010

Quercus dentata (Thunb. ex Murray) is a major tree found in dry habitats such as limestone areas of Korea. In order to characterize the ecological traits of Q. dentata, we treated Q. dentata saplings under four gradient levels of major environment factors such as light, soil moisture and nutrients for 5 months in a glass house. We then measured and analyzed growth differences among them. Regarding light, aboveground, belowground and plant biomass were highest at a high gradient and lowest at a low one. The root/shoot ratio was highest at the highest light gradient. Regarding moisture, no measured items were significantly affected by the moisture gradient. Regarding nutrients, aboveground, belowground and plant biomass were the highest at a slightly high gradient and the lowest at a gradient lower or higher than this. The root/shoot ratio was not significantly affected by the nutrient gradient. From these results, it was shown that the growth of Q. dentata was more affected by light and nutrients in the environment than moisture.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.3
• /
• pp.18-24
• /
• 1999

This study was aimed to develope appropriate soil media for the growth of Rhododendron hybrid $J_{ASANHONG}$ on the artificial ground five types of soil media was tested such as "sandy loam-general soil (T1)", "vermiculite-artificial soil (T5)", "sandy loam 50% + vermiculite 30% + sand 20% (improved of soil 2-T2)", "sandy loam 50% + carbonized rice hust 30% + sand 20% (improved of soil 3-T3)", "sandy loam 50% + humus sawdust 30% + sand 20% (improved of soil 4-T4)". The result of the research are as follows. 1. Among the type of soil media, the sandy loam(T1) soil type gave the worst effects on growth of above ground parts(height, No. of leaf, width of leaf, No. of flowering, dry weight of upper parts) and under ground parts(dry weight of roots). 2. Vermiculite(T5) showed the highest root growth(dry weight of roots). it seemed to be caused high saturated hydraulic conductivity and porosity. As a result, there is much available space for enabling the root spreads. 3. "sandy loam 50% + vermiculite 30% + sand 20%(improved of soil 2-T2)", "sandy loam 50% + carbonized rice hust 30% + sand 20%(improved of soil 3-T3)" showed good effects on growth of above ground parts and under ground parts compared with sandy 10am(T1) 4. "sandy loam 50% + humus sawdust 30% + sand 20% + (improved of soil 4-T4)" showed the highest effects on growth of above ground parts.

• Korean Journal of Ecology and Environment
• /
• v.53 no.1
• /
• pp.102-108
• /
• 2020

This study is to analyze the growth response of the Quercus dentata seedlings to four environmental factors and measure the ecological niche breadth. Environmental factors were light, moisture content, soil texture, and organic matter, treated with four gradients. The more quantity light increased, the heavier the leaves biomass, aboveground biomass, belowground biomass and plant biomass was. In treatment of water content and soil texture, growth response was no difference. The more organic matter increased, the heavier aboveground biomass was, but the remaining trait of plant was no difference. The ecological niche breadth was 0.865 in light, 0.995 in moisture content, 0.994 in soil texture and 0.988 in nutrient. Ecological niche breadth was the widest in the moisture content treatment and the narrowest in the light treatment. This means that the growth of Q. dentata seedlings grows well as the amount of light increases, and is sensitive to light, Thus, it is determined a growth and ecological niche breadth by light factors.

• Journal of Ginseng Research
• /
• v.11 no.1
• /
• pp.46-55
• /
• 1987

The regression line was used to predict ginseng root yield from characters of aerial parts, stem diameter, leaf length and width, and degrees of missing plants per unit area. The rates of fitness of predicted yield on practical yield investigated in field were high. Especially, theoretical yield calculated by the size of stem diameter was a good fit. Therefore, a line regression appeared to be a satisfactory fit.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.106-110
• /
• 2016

In this study, a planting density-growth-harvest (PGH) chart was developed to easily read the growth and harvest factors such as crop growth rate, relative growth rate, shoot fresh weight, shoot dry weight, harvesting time, marketable rate, and marketable yield of common ice plant (Mesembryanthemum crystallinum L.). The plants were grown in a nutrient film technique (NFT) system in a closed-type plant factory using fluorescent lamps with three-band radiation under a light intensity of $140{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and a photoperiod of 12 h. Growth and yield were analyzed under four planting densities ($15{\times}10cm$, $15{\times}15cm$, $15{\times}20cm$, and $15{\times}25cm$). Shoot fresh and dry weights per plant increased at a higher planting density until reached an upper limit and yield per area was also same tendency. Crop growth rate, relative growth rate and lost time were described using quadratic equation. A linear relationship between shoot dry weight and fresh weights was observed. PGH chart was constructed based on the growth data and making equations. For instance, with within row spacing (= 20 cm) and fresh weight per plant at harvest (= 100 g), we can estimate all the growth and harvest factors of common ice plant. The planting density, crop growth rate, relative growth rate, lost time, shoot dry weight per plant, harvesting time, and yield were $33plants/m^2$, $20g{\cdot}m^{-2}{\cdot}d^{-1}$, $0.27g{\cdot}g^{-1}{\cdot}d^{-1}$, 22 days, 2.5 g/plant, 26 days after transplanting, and $3.2kg{\cdot}m^{-2}$, respectively. With this chart, we could easily obtain the growth factors such as planting density, crop growth rate, relative growth rate, lost time and the harvest factors such as shoot fresh and dry weights, harvesting time, marketable rate, and marketable yield with at least two parameters, for instance, planting distance and one of harvest factors of plant. PGH charts will be useful tools to estimate the growth and yield of crops and to practical design of a closed-type plant production system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.367-372
• /
• 1997

Excessive water stress is one of major limiting factors affecting soybean yield, especially when soybean is grown in converted upland from paddy field. The present study was undertaken to know the genotypic variation in yield response of soybean to different environments in combination with soil texture and underground water table depth. Eight recommended soybean varieties in Korea and two supernodulating soybean mutants introduced from USA were planted in the lysimeter which was filled with two different soil types(sandy loam and clay loam). Of three underground water table depths(10, 30, and 50 cm) during whole growth stage, the lowest 10 cm was included to create excessive water stress. Yield was significantly different according to the underground water table depth and soybean genotypes, whereas soil type did not affect yield. There were significant interaction effects of soybean yield among soil type, soybean genotype, and underground water table depth. Yield of nts 1116 showed the highest across environments. Based on the regression analysis, the most stable variety was Sobaeknamulkong(bi=1.09). Jangsukong was fairly stable and high in yield, when compared to other soybean genotypes. However, nts 1116 was the most desirable ($D_i=228$) mainly due to the highest yield rather than the greater stability over environments. Multiple regression analysis revealed that shoot dry weight and nodule number were major factors affecting yield in the combined data over three water table depths and two soil types.

• The Korean Journal of Applied Statistics
• /
• v.33 no.6
• /
• pp.763-776
• /
• 2020

Onions show severe volatility in production and price because crop conditions highly depend on the weather. The government has designated onions as a sensitive agricultural product, and prepared various measures to stabilize the supply and demand. First of all, preemptive and reliable information on predicting onion production is essential to implement appropriate and effective measures. This study aims to contribute to improving the accuracy of production forecasting by developing a model to estimate the final weight of onions bulb. For the analysis, multi-level model is used to reflect the hierarchical data characteristics consisting of above-ground growth data in individual units and meteorological data in parcel units. The result shows that as the number of leaf, stem diameter, and plant height in early May increase, the bulb weight increases. The amount of precipitation as well as the number of days beyond a certain temperature inhibiting carbon assimilation have negative effects on bulb weight, However, the daily range of temperature and more precipitation near the harvest season are statistically significant as positive effects. Also, it is confirmed that the fitness and explanatory power of the model is improved by considering the interaction terms between level-1 and level-2 variables.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.160-168
• /
• 2003

This study was carried out to investigate the effects of induced wet-injury conditions on barley seedling growth. Barley seedlings at the three leaf stage were grown in culture solutions with various combinations of dissolved oxygen (DO), nutrients and citric acid (CA) concentrations. Seedling growth was reduced by hypoxia. Root length and root fresh weight were most severely reduced under 1 ppm DO. Shoot growth was slightly reduced but not root growth under low nutrient condition. Seedling growth was reduced by CA in a concentration-dependant manner, Response of seedling growth was efficiently differentiated in a solution containing 1 ppm DO, one tenth of the normal P, K and Mg concentration and 3 mM CA. Under this induced wet-injury condition, overall seedling growth of 6 cultivars was reduced by 11 to 19% compared to the control condition. The results suggest that the induced wet-injury condition can be used for the screening of resistant genotypes at the seedling stage.