• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.6
• /
• pp.495-501
• /
• 2013

Korean Utility Helicopter (KUH) has been designed to avoid the blade passing frequency and any instability due to a coupling of dynamic characteristics between the main rotor and the airframe in ground operation. For these design objectives, the vibration analysis and the ground resonance analysis were performed to analyze the dynamic characteristics of the airframe and the main rotor. Then, the whirl-tower test was conducted to identify the dynamic characteristics of the main rotor and the ground vibration test (GVT) was conducted to identify the dynamic characteristics of the airframe. The GVT for KUH was conducted with the test conditions and test articles established in consideration of each flight and ground condition. This paper shows the method and technique for performing the GVT for KUH and presents the correlation technique and the results for the correlated analysis model.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.490-498
• /
• 2010

This paper presents an autonomous target tracking approach and technique for transmitting ground control station image periodically for an unmanned aerial vehicle using onboard gimbaled(pan-tilt) camera system. The miniature rotary UAV which was used in this study has a small, high-performance camera, improved target acquisition technique, and autonomous target tracking algorithm. Also in order to stabilize real-time image sequences, image stabilization algorithm was adopted. Finally the target tracking performance was verified through a real flight test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.87-97
• /
• 2015

In general, such ground based methods are utilized to validate maneuvering and attitude control logics of a spacecraft by a simulation with a flight software at a design phase and a integrated function test with actual hardwares at a system level. Recently, varification researches using operating simulators are getting increase using compact and precise components under a ground condition. The present paper investigates and summarized the development trend of cold gas propulsion systems for the spacecraft simulators and their major performance characteristics to derive fundamental data which are necessary for a conceptual design of the simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.7
• /
• pp.891-897
• /
• 2020

A flight termination system, which consists of ground and vehicle systems, forcibly terminates flight if it is deemed dangerous. In order to accomplish this, the system should maintain the link reliability above a certain level throughout the whole flight. However, the national proving ground for guided missiles could not fully meet that condition because of the gradually improving performance criteria. In this paper, we have analyzed the link budget for the flight termination system. Furthermore, we have designed and developed an emergency destruction command transmitter system, which is a ground system of the flight termination system, to provide the necessary link margin. Afterwards, we measured the received signal strength at the vehicle system and compared it with that of the existing transmitter system. We hereby confirmed that the link reliability of the flight termination system improved.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.103-107
• /
• 2005

There is an X-band transmission system in KOMPSAT-2 in order to downlink the acquired image data in high speed. KOMPSAT-2 employs a steerable high gain X-band antenna for that purpose. During the ground test, the X-band RF radiation is so strong that it has to be controlled for safety, while spacecraft needs to keep flight configuration. Also in a launch site of which all test facilities are the subjects of strict radiation control, the antenna system should be tested again without any change in the configuration. To limit the actual radiation of RF power, an antenna hat was manufactured and thoroughly tested to demonstrate the spacecraft safety when using it.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.38-44
• /
• 2023

This study aims to determine how agricultural drones are operated for flight tests using a 5G communication in order to carry out a mission such as sensing agricultural crop healthy status with special cameras. Drones were installed with a multi-spectral and IR camera to capture images of crop status in separate altitudes with different speeds. A multi-spectral camera can capture crop image data using five different particular wavelengths with a built-in GPS so that captured images with synchronized time could provide better accuracy of position and altitude during the flight time. Captured thermal videos are then sent to a ground server to be analyzed via 5G communication. Thus, combining two cameras can result in better visualization of vegetation areas. The flight test verified how agricultural drones equipped with special cameras could collect image data in vegetation areas.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.87-93
• /
• 2019

This study suggests the development of the ALE (Automatic Link Establishment) system for the long-range communication with a helicopter at the lands or marines by HF (High Frequency) radios. In the condition of LOS or more than 35 NM, the communication success rate is significantly lowered when the frequency is manually selected because of the reduced transmission power and various strong RF environment noise signals. In this paper, we make an effort to overcome the difficulties of choosing the optimal frequency when the operating frequency selection is manually operated in long-distance communication or LOS uncertain environment. The ALE system is designed based on the frequency analysis propagation software and is verified that the communication success rate is increased by applying the proposed system. The ALE system was applied to the helicopter system and the ground/flight test was conducted. As a result, the superiority and efficiency of the proposed system were verified.

• Journal of Aerospace System Engineering
• /
• v.15 no.5
• /
• pp.43-49
• /
• 2021

This research shows how is designed, and its performance is evaluated on the ground for the VTOL drone before the flight test initiates. The targeted drone weight is approximately 45 kg including battery packs, and 4 motors are utilized to produce thrust and control directions. 30 min flight schedules were simulated to estimate the total power consumptions which result in 2.4 kWh. Then, two packs of 13-cells lithium-polymer battery with operating voltage ranging between 54 V and 44 V with up to 4 C-rate were fabricated to safely operate a VTOL drone. Moreover, the battery management system was installed to prevent over and under-voltage and over-current while running a battery system. To finally verify battery's performance, we conducted a ground evaluation for discharging battery tests at -10 ℃, 25 ℃ and 40 ℃, resulting in satisfying simulated power consumption conditions for flight schedules.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.5
• /
• pp.446-453
• /
• 2012

As part of the integration phases in developing a UAV, a System Integration Laboratory (SIL) has been developed to provide integrated test capability for the verification of avionics system requirements. The SIL has realized primary functions that are common in manned aircraft SIL's, and specialized laying stress on test data visualization and test automation under the closed-loop structure of the ground control simulation, aircraft simulation and flight simulation components. Those design results have led to easy and sure verification of lots of complex requirements of the UAV avionics system. The functions and performances of the SIL have been proved in four gradational test steps and checked to operate successfully in aircraft System Integration Test Environment for the integration of UAV ground station and aircraft.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.96-103
• /
• 2019

In this study, a comparison was conducted to verify the propellant isolation assembly of the Korea Pathfinder Lunar Orbiter (KPLO). An engineering validation model (EVM) is being developed to simulate the flow of the flight model. Three factors were selected for comparison: the total pressure drop during propellant isolation assembly, the waterhammer by driving thruster valve, and the orifice set up for flow control and damping the waterhammer. The analysis results are compared with EVM test results. In the future, backup data to confirm the design will be established.