• Journal of the Korean association of regional geographers
• /
• v.21 no.4
• /
• pp.660-672
• /
• 2015

The rural housing is a key element of the rural landscape. The studies on the rural housing have focused on folk housing, but this study focuses on the comtemporary rural housing. The research area is the eight rural settlements on the sea islands of Gyeongnam. This study may provide the base for an understanding Korean rural landscape through the analysis of the rural housing types with special reference to the roofing types and materials. Most roofing types but the flat roofing type belong to the traditional roofing types. Among the combined-style roofing(결합양식지붕) types, the pitched-and-flat roofing(경사-평지붕) type is about ten times more frequent than the pitched-and-pitched roofing(경사-경사지붕) type. The most frequent roofing materials are cement, precoated steel plate(컬러강판), and artificial slate(인조슬레이트). Five typical types of rural housing are derived from the remarkable combinations of roofing types and roofing materials in the research area.

• Journal of the Korean Geographical Society
• /
• v.51 no.3
• /
• pp.441-454
• /
• 2016

This study deals with the contemporary rural housing with special reference to the roof types/materials and the outer wall materials in Ulleungdo Mountains. The most frequent roof type of rural housing is the hip-and-gable roof type(42.1%); and the next, the gable roof type(25.8%). For the roof materials, the precoated steel plate(69.1%), the asphalt shingle(11.8%), and the cement(10.7%) are the most frequent but the roofing tile and the artificial slate are not used. And for the outer wall materials, the cement(27.5%), the siding(21.3%), the corrugated galvanized iron(16.8%), and the lumber sheet(6.7%) are the most frequent. It is the hip-and-gable roof housing type with the precoated steel plate(roof materials)(41%), or the hip-and-gable roof housing type with the precoated steel plate(roof materials) and the cement(outer wall material) (18.0%) that is the most frequent type of rural housing in Ulleungdo Mountains. For the roof/wall materials, the ratio of the corrugated galvanized iron is high probably due to the relatively low cost of transport, and the ratio of the roofing tile, the artificial slate, the red brick, and the building stone is very low probably due to the relatively high cost of transport.

• Journal of Korea Multimedia Society
• /
• v.17 no.3
• /
• pp.393-404
• /
• 2014

This research proposes a method to draw a number of components for roof frame in 3D datum. It is based on the analysis of the roof curvature and their geometric relationship in the traditional wooden buildings. Correlations between the components that generate a roof surface is defined with functional formula. The design system which automatically generates 3D datum for the components is implemented by reflecting the structural mechanics for them. The suggested system provides a control function to easily draw a traditional house. In this system, the components engaged in forming a roof surface are not only automatically generated but also simply modified according to the user's request. It would improves design efficiency and ensure a various roof surface design. Furthermore it makes possible systematic drawing and standardized industrial processing. Consequently, the proposed method is expected to contribute to the popularization of traditional house constructing.

• Journal of the Korean association of regional geographers
• /
• v.22 no.2
• /
• pp.369-382
• /
• 2016

The studies on the rural housing have focused on folk housing, but this study focuses on the contemporary rural housing with special reference to the roof types/materials and the outer wall materials. The research area of this study is the fourteen rural settlements in Jeju Island. The hip roof type, the hip/flat roof type, the simple-flat roof type, the gable roof type, and the eyebrow-and-flat roof type are the most frequent roof types. Among the roof materials, the precoated steel plate, the artificial slate, the cement, the cement/roof tile, and the cement/artificial slate are the most frequent materials. The cement holds more than a half of the outer wall materials, and the cement/basalt rock, the tile/cement, the tile, and the diverse siding are the next frequent outer wall materials. The comparison of the rural housing reveals that there are some clear differences between Jeju Island and Gyeongnam Province in terms of the roof types and the outer wall materials.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.255-263
• /
• 2004

광명시 경륜 경기장은 국민 체육진흥공단에서 턴키(Turn key)공사로 발주하였고, CS구조+공간건축+대우건설, 삼성건설, 태영건설의 제출안이 당선되어 현재 시공중에 있다. 경기장의 저층부는 PC로 설계되었고, 지붕은 철골 트러스를 사용한 Dome 형상으로 이루어져 있다. 돔 지붕의 개념은 지붕에 물을 부었을 때 가장 흘러가기 쉬운 방향으로 트러스를 배치하여 유연한 힘의 흐름을 유도하는 것이다. 143.6m(폭)${\times}$183.5m(길이)${\times}$21m(높이)의 지붕엔 지붕의 개념인 Flow Truss를 물이 흐르는 방향의 방사형으로 배치하고, 내부에 압축링(Compression Ring Truss)과 외부에 인장링(Tension Ring Truss)를 설치하여 힘의 흐름을 단순화시켰고, 실내에서 보기에 플로우 트러스의 간격을 넓게 유지함으로써 개방감을 극대화시켰다. 또한 Flow Truss는 동일한 곡률과 길이로 설계하여 표준화시킴으로써 시공성과 경제성을 동시에 만족토록 하였다. 현재 저층부 시공은 거의 완료된 상황이고, 곧 지붕을 설치할 예정이다. 본 고에서는 돔 지붕의 형성 개념과 설계 과정을 살펴보고, 접합상세 등의 해결에 대해 살펴보겠다.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.78-103
• /
• 2016

This research is a study on the side framework structure of the hipped and gable roof of Muryangsujeon at Buseoksa Temple. There is a record that Muryangsujeon was deconstructed and repaired in the period of Japanese Occupancy, and its authenticity has continuously been called into question because the structure of the hipped and gable side roofs, and the bonding of the rafters and eaves were not in good order and very different from those of Joseon Dynasty. Scholars date it differently. It is either dated at 13th century or 12th century. This study compares the non-planar configuration of the middle and front proportions of Muryangsujeon's hipped-and-gable-roof framework with those of the Tang(唐) and Song(宋) Dynasties in China. It concludes that the hipped-and-gable-roof framework of those architecture were built with the same technique. The style of architecture that side rafters directly touch the internal security (梁), like in Muryangsujeon, is not usual even among the hipped and garble roofs of the Tang(唐) and Song(宋) Dynasties. The technique of constructing the hipped roofs developed much further after the Tang Dynasty because they began to use garble eaves to build the side structure. The technique seems to have developed greatly by the period of Ming and Qing Dynasties. It also seems that the parallel-flat (平行輻射椽) rafter, which is the form of rafters used between the parallelrafter period and the half-flat-rafter period is very similar to the construction style of the current rafters of Muryangsujeon. However, the Muryangsujeon's eaves do not touch the corner rafter from the middle part. This seems to be a unique style, which is not common in China. In conclusion, the style of the side roof framework of Muryangsujeon at Buseoksa Temple is not of the China's southern regions, but of the northern regions of Tang(唐), Song(宋) and Liao(遼) Dynasties. And when considering the construction year and proportions of the middle front and side front on the same flat, this must be an ancient technique of the northeastern regions of Asia. Since it is likely that the structure of the side roof framework of Muryangsujeon at Buseoksa Temple has not been altered but is a unique style of hipped and gable roofs, this roof can serve as a good guide to restoring the hipped and garble roofs of the pre-Goyreo Dynasty period.

• Journal of Bio-Environment Control
• /
• v.7 no.4
• /
• pp.324-329
• /
• 1998

Effect of roof slope on the transmissivities of direct and diffuse solar radiation using a computer simulation model developed by Kim and Lee(1997) was analyzed for 10-span glasshouse located in Seoul(37$^{\circ}$34' N), Chonju(35$^{\circ}$49' N) and Cheju(33$^{\circ}$31' N). Transmissivities of diffuse solar radiation in glasshouse with roof slopes of 15, 20, 24.6, 30 and 35 degree were calculated as 61.3, 61.6, 61.7, 56.8 and 58.6%, respectively. Transmissivities of direct solar radiation(TDSR) during the period except summer season were highly affected by the roof slope. During the winter season, TDSR in glasshouse with roof slopes of 30 and 35 degree were higher than those with other roof slopes. Also, during the period except winter season, TDSR in glasshouse with roof slope of 20 degree were higher than those with other roof slopes. Difference in TDSR with latitude was significant during the period from October to February. At this period TDSR were highly appeared at lower latitude. Effect of roof slope on TDSR in S-N greenhouse was smaller than those in E-W greenhouse. It is considered that direct solar radiation highly transmitted in the glasshouse with roof slope of 20 degree.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.1
• /
• pp.113-120
• /
• 2011

Retractable roof system is one of the special feature in stadium or complex structure. And this retractable roof system makes possible to use spacial structure all-weather. This retractable roof system is able to classified into overlapping, parallel movement and folding system. Moving load, impact load, inertial or braking loads, these dynamic loads induced by movements of retractable roof system. So it is necessary to analysis of spacial structures are subjected to these dynamic loads. Dynamic loads that are induced by the retractable roof movements can be applied to moving mass method or moving force method. But, moving force method is appropriate because the retractable roof movements is slow relatively. In this paper, new application method of moving forces induced by the retractable roof movements is proposed. And vibration analysis of spacial structures are executed by using the proposed method. This proposed equivalent moving force can be easily applied to spacial structure that is subjected to dynamic loads induced by movement of the retractable roof system.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.3
• /
• pp.139-149
• /
• 2016

Roof cladding of buildings are required for the measures about the 'screw pull-out' which causes the casualties and the property damage by typhoons. In this study, the pull-out resistance was increased by increasing the penetration depth of the screw installing a ironware called 'insert nut' on the roof cladding frame. Tensile tests were conducted to compare the pull-out strengths of a general screw-joint and a nut insert joint. Roof cladding that is actually being used in the field was produced using the 'solid work' and then the roof claddings using a general screw-joint and a nut insert joint were compared by a static test and dynamic test.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.3
• /
• pp.47-54
• /
• 2012

The roof surface of spatial structures is often damaged or destroyed because of its light weight roof structure and materials. Many of large scale stadiums have roof structure framed with steel truss or stay cable and wrapped or covered with membrane material Teflon, and this membrane material is easily damaged and its loss is quite serious. Through such examples, it was found that the studies on wind proof design of roofs of large space structures were not sufficiently made. This study conducted wind pressure experiment and fluid analysis in order to examine the aerodynamic characteristic of the roof shape of hyperbolic paraboloid spatial structures. Although the biggest minimum peak wind pressure coefficient was shown in the edges of the roof in the wind origin direction, it decreases with the advancement to the longitudinal direction of the roof.