• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.131-143
• /
• 2012

The past researches on roadway segment safety estimation focused on intersections, which are the primary traffic accident regions. The past researches on roadway segments, However, analyzed the effects of certain factors on the traffic accident occurrence rate by organizing the individual geometric structures of the roads, and there is still a dearth of researches on the development of a traffic accident estimation model for rural roadway segments. Therefore, this research focused on rural two-lane and multilane roadway segments and developed traffic accident estimation models through the application of statistical techniques. This is required to explain such high frequency of zero counts in the traffic accident data. In this research, it was found that the Hurdle model is more suitable than the Poisson or negative binomial-regression model for explaining the excess zeros case. In addition, main variables were chosen to estimate their effects on traffic accident occurrence at rural roadway segments, and the safety at such rural roadway segments was estimated. In this research, it was assumed that there are different factors that affect the safety at two-way lane and multilane roadway segments, and a traffic accident estimation model was developed by dividing the two-way lane and multilane roadway segments.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.131-143
• /
• 2010

This study has aimed to develop accident modification factor(AMF) for rural two-lane roadway segments. Accident Modification Factor is a coefficient to assess roadway safety as reflecting characteristics of homogeneous roadway. It estimates accident frequency of roadway segments with developed base model and exposure. We found on items of such factors as crosswalk, driveway density, topography characteristic, land use and median through statistical models and literature review. To develop accident modification factors, we used statistical model methods and analyses of applicability and expert judgement method were practiced to validate it. Although expert judgement for land use item was questionable, most items were rated acceptable. Result of comparative analysis revealed crash frequencies of IHSDM and KHSEM were most similar with actual. However, accident distribution of KHSEM was more proper than IHSDM. Also overall estimated values of RSDS were found to be overestimated.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.33-46
• /
• 2008

A two-lane highway has a high rate of head-on collisions, sideswipe collisions, crashes with an fixed object. This study was to analyze the weakness of a cross section and a horizontal curve in a two-lane highway and find countermeasures to improve the traffic operations and safety. This study evaluated the effectiveness of widening, curve flattening and superelevation, verified it with a case study and assessed the economical efficiency. This study selected the difference between tangent section operating speeds and curve section operating speeds as an evaluation index of horizontal curve section in a two-lane highway. The results indicated that curve flattening is the best way to improve the traffic safety in a two-lane highway. This study has implication that it provides the quantitative effects of curve flattening. Also directions for future study were discussed.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.87-94
• /
• 2002

2001년 경찰청 $\ulcorner$2001년판 교통사고통계$\lrcorner$ 자료에 의하면 사고피해의 정도를 나타내는 치사율에 있어서 중앙선침범사고가 과속사고와 함께 가장 높은 수치를 보이고 있으며, 대형 교통사고의 39.5%가 중앙선 침범에 의해 발생한 것으로 나타났다. 실제로 2000년 한 해 동안 총 사고건수 290,481건 중 중앙선 침범에 의해 18,931건 (6.52%)의 교통사고가 발생하여 사망자 1,472명, 부상자 35,046명으로 전체 교통사고 사망자의 14.38%, 부상자의 8.21%를 점하고 있는 것으로 나타났다. 이와 같이 전체 교통사고에서 중앙선침범사고가 차지하는 비중 이 높아지고 있어 중앙선침범사고를 줄이기 위한 대책의 일환으로 중앙분리대, 표지병, 시선 유도봉 등과 같은 중앙선침범 예방시설물을 설치하고 있으나, 해당 시설물에 대한 설치기준이 없는 실정이다. 이렇듯 중앙분리대 설치기준의 부재로 인해 중앙선침범사고 발생과 이에 따르는 경제적인 교통사고 비용손실, 그리고 중앙분리대의 과다설치로 인한 국가 재원의 낭비는 간과할 수 없는 문제점을 내포하고 있다. 이러한 점에 착안하여 기존에 지방부 2차로 도로의 직선부에 대한 중앙선침범사고 예측모델이 개발되었고 본 연구에서는 그 연장선상에서 지방부 2차로 도로의 곡선부에 대한 중앙선침범사고 예측모델에 대한 중앙선침범사고 예측모델의 개발을 통해 중앙선침범사고에 대한 사회적 비용을 산정하고, 현재 설치하여 운영중인 중앙선침범 예방시설물의 설치비용간의 비용-편익분석을 통해 얻어진 기준으로 중앙선침범 예방시설물 설치의 가부에 대한 보다 현실적이고 비용-효율적인 중앙선침범 예방시설물 설치기준을 제시함으로써 교통사고 비용손실을 최소화하고, 중앙분리대의 효율적 설치방안의 도입을 통한 경제적 이익창출을 도모하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.767-774
• /
• 2008

This study has been developed the way that evaluates the road safety using the speed of individual vehicles at curve sections in 2-lane rural highways. For this study, we developed variation of operational speed for the individual vehicle using the speed of vehicles in 96points of selected roads. Drawing out of variation of operational speed for the individual vehicle, estimation models for speed variation of individual vehicles considering horizontal alignments and vertical alignments of the roads have been developed. These models presents the way to evaluate road safety out of the operational speed and acceleration of individual vehicles. Considering safety and based on the results of these study above, some regular spots are ranked by "good", "fair", "bad". The results that this study showed in this paper could be useful to derive some particular spots that needs to be improve in terms of safety.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.25-32
• /
• 2004

It is implicated in the current road design manual that design speed is well representing the operating speed of drivers. On the contrary, the disparity between the design speed and operating speed means that current road design cannot guarantee the safety and comfort of driving. In this context, operating speed was observed at the two lane rural roadways to find out the relation of operating speed and design speed. In addition to this, the friction factor from supply and demand which was derived from the operating speed was compared in terms of the dynamics in driving safety factor. It was concluded that the actual speed was consistently exceeding the design speed at the horizontal curves having the radius less than or equal to 200 m. Similarly, the demanded side friction was also consistently exceeding the supplied side friction at the horizontal curves having the radius less than or equal to 200 m and the amount of difference was also inversely proportional to the radius of the horizontal curves.

• Journal of Korean Society of Transportation
• /
• v.18 no.3
• /
• pp.101-112
• /
• 2000

The Purpose of this Paper was to revise the method of USHCM and to establish new method for level of service analysis on two-lane rural highways. For this Purpose, total delay rate was selected as new MOE for level of service, replacing the present Percent time delay. This result showed that total delay rate was more effective for considering the effects of traffic flows, auxiliary lane, and vertical tirade. The application of total delay rate could resolve the Problems in the USHCM method, such as too wide ranges for level of service D and E, and the use of different Procedures for level of service analysis of general terrain segment and specific grade Procedures. The research results are as follows First, a new method for level of service analysis on two-lane rural highways was developed using the total delay rate. Second, a new classification for level of service was developed and a consistent method applicable for general terrain segment and specific tirade Procedures was developed. Third, the desired speed on two-lane rural highways was determined as 85km/h.

• International Journal of Highway Engineering
• /
• v.12 no.2
• /
• pp.91-97
• /
• 2010

This study started from the problem recognition of climbing lane installed in Korea roads. Because design standards of climbing lane installed don't match traffic pattern of korean drivers, coefficient of utilization of climbing lane is low and merging section between climbing lane and main lane has traffic accident possibilities. For this, brand-new design standards developed from the present lane design criterion, taper lenghs, and traffic signs, then field adoption test was carried out to prove the effectiveness. As a result, coefficient of utilization of climbing lane and average traffic velocity in climbing section are improved and the economic analysis also shows that brand-new standards has high feasibility for low cost. In case of broad application to not only expressway but national and local road based on the study, it could be a significant contribution to traffic flow improvement.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.