• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.19-26
• /
• 2009

The Ministry of Land, Transport and Maritime Affairs(MLTM) project for the DB construction of national geotechnical information was automatically computerized the geotechnical investigation results on the construction site in 2007. So 'the rule for computerizing of geotechnical investigation results and its application' were promoted the establishment and applicable project. It was promoted in earnest that all organization and affiliation of MLTM, local governments included the project because of stabilization of the law from 2008. We have analyzed a application-ratio of geotechnical information about users of geotechnical information system and distribution data and established a plan of applying enhancement for the DB construction and DB utilization in 2008. In this paper, we propose the result for application-ratio analysis and application plan through the application-case study of national geotechnical information DB. In the application-ratio analysis, the analysis in the field shows the most high as 39% in construction planning and preliminary investigation, the analysis in the effect of capabilities shows the most high as 25% in the increased efficiency of business. Also the analysis in the field of application shows the most high as 95% a application-ratio of geotechnical information in architecture and civil.

• Journal of the Society of Disaster Information
• /
• v.19 no.2
• /
• pp.313-325
• /
• 2023

Purpose: According to the recent occurrence statistics of ground accidents, ground subsidence and subsidence have become social problems as the frequency has increased centering around the downtown areas. This study tried to clarify risk of detailed factors which have an effect on subsidence. Method: For the study, detailed risk factors of 28 foundations were mainly drawn through the materials, precedent studies, and research reports shown by analyzing JIS' accident cases from 2016 to September 6, 2022 and by taking advice from an excavation expert. And risk was assessed by conducting a survey on 12 subsidence experts from the universities, research institutes, and industries and applying Fuzzy-FMEA to it. Result: It has found that damage of sewer pipes is 24.99% of overall risk, followed by excavation work (17.34%), water pipes (14.84%), and poor compaction (refill) (13.93%). And it has found that risk of damaging utilities (water pipes, sewer pipes, and other utilities) is highest, followed by poor construction works (excavation work, damage of sewer and water pipes, and other utility work) and poor compaction (refill). Conclusion: This shows that risk of subsidence factors judged by experts is similar with JIS' cases of ground subsidence.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.170-173
• /
• 2011

국내 풍화지반의 토량환산계수를 정확하고 합리적으로 추정하는 것은 공사의 성패에 있어 매우 중요한 사항이다. 하지만 현업에서는 풍화지반의 풍화도를 정량화하는 것이 어렵고, 토량환산계수를 적용 시 외국의 기준을 사용하는 경우가 빈번하다. 뿐만 아니라, 국내 풍화지반의 토량환산계수에 관한 연구는 아직 미비하여, 끊임없이 토량환산계수의 정확성 및 사용성에 대해 문제 제기가 있어 왔다. 이에 본 연구에서는 TEPS (Tunnel Electrical resistivity Prospecting System)를 이용하여 화강암의 풍화 정도와 전기비저항의 상관관계를 도출하고 풍화지반 내 흙이 차지하는 비율(S/W 비)을 전기비저항과 개괄적으로 상관관계를 맺어 전기비저항을 이용하여 토량환산계수를 산정하는 방법을 제안하였다. 현장 관리자가 풍화지반에서 쉽게 토량환산계수 및 토공량에 관한 정보를 획득할 수 있도록 풍화지반 토공관리프로그램(WEMP)을 개발하고 토량환산계수 측정시스템을 설계하였다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2009.05a
• /
• pp.133-137
• /
• 2009

지금까지의 무선 통신에서는 Socket 방식이 주류를 이루고 있다 하지만, Socket 통신을 사용하면 확장이 어렵다는 단점이 있다. 본 논문에서는 최근 이슈가 되는 웹서비스 기법을 통해 PDA와 서버를 연결함으로써 다양한 장치들을 수용하여 확장하는데 유연하게 대처할 수 있도록 한다. 예를 들어, 기존의 Socket 방식을 사용하였을 때는 클라이언트 프로그램을 확장할 때 미리 정의 된 Socket 코드와 서버에서 요구하는 데이터 형식을 분석하여 이를 실제로 클라이언트에서 개발해야 하기 때문에 새롭게 개발하는 수준의 코딩이 필요하다. 그러나 웹서비스 기법을 사용하면 서버 주소만 알면 WSDL를 통해 Local method를 쓰는 것과 동일하게 사용할 수 있으므로 확장성이 뛰어나다. 웹서비스 방식은 클라이인트와 서버에 서로 다른 언어를 사용할 때 특히 장점을 가지며, 실제 본 시스템에서도 서버는 Java, Mobile Client는 Visual Basic.Net으로 서로 다른 언어를 이용하여 개발되었다.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.176-187
• /
• 2022

Due to recent mid-scale earthquakes in the Korean Peninsula, the Korean central and local governments are preparing new measures for earthquake hazard mitigation. Geological and geotechnical information is essential for earthquake hazard assessment. Thus, related data have been collected and assimilated as DBs by various national organizations. However, several problems arise when local governments intend to use this information to establish earthquake hazard mitigation measures. In the case of the geological information, small-scale geological maps make it difficult to acquire detailed information, whereas lithofacies and faults do not often match at the boundaries of large-scale geological maps. Significant geotechnical information is lost due to lack of digitalization. Present study proposes four policy plans for geological and geological information management. First, it is necessary to link industry-academictechnology fields to use the information that has already been or to be produced more efficiently and professionally. Second, local government regulations are required to be enacted and revised to accumulate a lot of geological and geotechnical information. Third an expert system should be prepared to improve the quality of the information. Fourth, it is necessary to establish a dedicated department and expand budget support for efficient information management.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.139-150
• /
• 2007

As computer technology has been rapidly advanced, geographic information system (GIS) is recently used in many disciplines. In this study, for a model area in Seoul, seismic hazard potential relating to site effects, which are influenced by the subsurface geotechnical conditions, was estimated using the GIS tool. The distribution of pre-existing borehole drilling data in Seoul metropolitan area was examined for the regional estimation of site-specific seismic responses at the model area. Spatial geo-layers across the entire model area were predicted by constructing a GIS-based geotechnical information system (GTIS). A microzonation of site period $(T_G)$ for estimating site-specific seismic responses at the model area was performed within the GTIS. The spatial microzoning map of $T_G$ indicated seismic vulnerability of two- to four-storied buildings in the model area. Furthermore, a site classification map for determining the design ground motion was established based on the $T_G$ within the GTIS. This informed that most of location in the model area was categorized into current site classes C and D. This seismic microzonation framework for the model area could be applicable particularly in the entire Seoul metropolitan area based on the pre-existing borehole data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06c
• /
• pp.149-152
• /
• 2007

최근 모든 분야에 대한 전산화가 가속화됨에 따라 업무 처리 능력의 향상과 함께 시간 비용의 절감을 이루고 있다. 이러한 추세와 함께 건설 분야에서의 전산화가 진행 중이다. 본 논문에서는 굴착장비의 전류 값과 굴착 깊이 계측을 통해 깊이에 따른 지반 강도를 전산화 시켜 추정함으로써 보다 합리적으로 말뚝 기초를 시공하는 방법 개발하고자 한다. 본 시스템은 건축, 토목, 건설 분야에서 국내 최초로 시도되는 것으로, 실제 공사 현장에서 획득되는 데이터의 분석을 도와 측정 오류(Human Error)를 최소화함은 물론 공사비 절감, 신속한 공사 정보 제공 등의 파급효과를 기대할 수 있다.

• Proceedings of the KSEG Conference
• /
• 2005.04a
• /
• pp.117-122
• /
• 2005

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.1
• /
• pp.49-57
• /
• 2022

In order to efficiently analysis the stability of a slope, measuring the shear strength of soil is needed. The Standard Penetration Test (SPT) is not appropriate for a slope inspection due to cost and weights. One of the ways to effectively measure the N-value is the Dynamic Cone Penetration Test (DCPT). This study was performed to develop a minimized multi-function sensors that can easily estimate CPT values and Volumetric Water Content. N value with multi-fuction sensor DCPT showed -2.5 ~ +3.9% error compared with the SPT N value (reference value) in the field tests. Also, the developed multi-fuction sensor system was tested the correlation between the CPT test and the portable tester with indoor test. The test result showed 0.85 R2 value in soil, 0.83 in weathered soil, and 0.98 in mixed soil. As a result of the field test, the multi-function sensor shows the excellent field applicability of the proposed sensor system. After further research, it is expected that the portable multi-function sensor will be useful for general slope inspection.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.595-600
• /
• 2001

Recently, interests in subsidence hazard have been increased due to the underground construction such as subway construction and managements of abandoned mines. GIS analysis of subsidence hazard has a lot of advantages in handling of spatial data and managing database. For better result of GIS analysis, there are some necessities of modifying previous subsidence theory and model. To take surface profile into account allows the application of complicated topology. Furthermore. for 3-dimensional analysis. two subsidence profile curves that are perpendicular to each other should be considered simultaneously. Through these modifications, the model for subsidence analysis using GIS can be established. With ideal case of cavities and other conditions, GIS analysis was accomplished and meaningful results were produced. More realistic properties of cavity. soil layers, groundwater condition and topology will enable GIS analysis method to produce more reliable result and to widen the area of applications.