• Journal of the Korean earth science society
• /
• v.39 no.1
• /
• pp.53-66
• /
• 2018

The information of surface reflectance ($R_{sfc}$) is important for the heat balance and the environmental/climate monitoring. The $R_{sfc}$ sensitivity to error-induced variables for the Geostationary Environment Monitoring Spectrometer (GEMS) retrieval from geostationary-orbit satellite observations at 300-500 nm was investigated, utilizing polar-orbit satellite data of the MODerate resolution Imaging Spectroradiometer (MODIS) and Ozone Mapping Instrument (OMI), and the radiative transfer model (RTM) experiment. The variables in this study can be cloud, Rayleigh-scattering, aerosol, ozone and surface type. The cloud detection in high-resolution MODIS pixels ($1km{\times}1km$) was compared with that in GEMS-scale pixels ($8km{\times}7km$). The GEMS detection was consistent (~79%) with the MODIS result. However, the detection probability in partially-cloudy (${\leq}40%$) GEMS pixels decreased due to other effects (i.e., aerosol and surface type). The Rayleigh-scattering effect in RGB images was noticeable over ocean, based on the RTM calculation. The reflectance at top of atmosphere ($R_{toa}$) increased with aerosol amounts in case of $R_{sfc}$<0.2, but decreased in $R_{sfc}{\geq}0.2$. The $R_{sfc}$ errors due to the aerosol increased with wavelength in the UV, but were constant or slightly decreased in the visible. The ozone absorption was most sensitive at 328 nm in the UV region (328-354 nm). The $R_{sfc}$ error was +0.1 because of negative total ozone anomaly (-100 DU) under the condition of $R_{sfc}=0.15$. This study can be useful to estimate $R_{sfc}$ uncertainties in the GEMS retrieval.

• Journal of the Korean earth science society
• /
• v.40 no.3
• /
• pp.212-226
• /
• 2019

This study derived spectral Lambertian Equivalent Reflectance (LER) over East Asia from the observations of Ozone Monitoring Instrument (OMI) onboard polar-orbit satellite Aura. The climatological (October 2004-September 2007) LER values were compared with the surface reflectance products of OMI or MODerate resolution Imaging Spectroradiometer (MODIS) in terms of the atmosphere-environment variables as follows: wavelength (UV, visible), surface properties (land, ocean), and cloud filtering. Four kinds of LER outputs in the UV and visible region (328-500 nm) were retrieved based on the averages of lowest (1, 5, and 10%) surface reflectance values as well as the minimum reflectance. The average of the lowest 10% among them was in best agreement with the OMI product: correlation coefficient (0.88), RMSE (1.0%) and mean bias (-0.3%). The 10% average and OMI LER values over ocean were 2% larger in UV than in visible, while the values over land were 1% smaller. The LER variability on the wavelength and surface property was highest (~3%) in the condition of both land and visible, particularly in the ice-cap and desert regions. The minimum reflectance values over the oceanic and inland sample areas overestimated the MODIS product by 1.4%. This high-resolution MODIS observations were effective in removing cloud contamination. The relative errors of the 10% average to MODIS were smaller (-0.6%) over ocean but larger (1.5%) over land than those of the OMI product to MODIS. The reduced relative error in the OMI product over land may result from additional cloud filtering using the Landsat data. This study will be useful when retrieveing the surface reflectance from geostationary-orbit environmental satellite (e.g., Geostationary Environment Monitoring Spectrometer; GEMS).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.1
• /
• pp.28-31
• /
• 2018

This paper investigates the ground reflection effect on the channel capacity of an orbital angular momentum (OAM) multi-mode transmission system that uses uniform circular array (UCA) antennas. The ground-reflected signals cause inter-mode interferences between the OAM modes, and lead to system performance degradation. The OAM multi-mode channel capacity severely degrades owing to the ground reflection as the transmission distance increases. Increasing the UCA height above the ground and using highly directive array elements can mitigate the ground reflection effect and increase the channel capacity.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.201-204
• /
• 2007

본 논문에서 디지털지도를 이용하여 다중경로 전파의 특성을 연구하였다. 일반적으로 목표물에서의 전계의 세기는 직접파와 지면 반사파의 합으로 구해진다. 이 논문에서는 수직면의 장애물인 고압선, 철탑, 산악지형의 경사면 등에 의한 반사파를 고려하여 전체 전계를 계산 하였다. 그리고 지면 반사의 경우, 지면의 경사를 고려하여 목표물에서의 전체 전계의 정확도를 향상시켰다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.26-32
• /
• 2013

The earth reflection effect on the induced voltage by line source such as power line occurring induction inteference is analyzed to scrutinize how much it would reduce the induced voltage. Using hankel transformation including bessel function, directly calculation formulae for extracting a refelction coefficient is a most important technical application in this paper since the reflection coefficient on the earth cannot be deduced by a general coefficient calculation formulae according to a plain wave. The electric field is utilized to transform the electromagnetic field into an induced voltage. The composed efficiency to a source induction voltage by an earth reflection is about a range of 60~70% for the axis constellation of each object like observation point, source position and other material parameters.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1984.12a
• /
• pp.45-45
• /
• 1984

• Proceedings of the KAIS Fall Conference
• /
• 2002.05a
• /
• pp.190-193
• /
• 2002

SiO₂, ZrO₂를 사용하여 안경 렌즈의 5충 코팅을 설계하였다. 제5층의 두께를 변화시킨 후 반사율을 계산하고, RGB의 반사율을 이용하여 반사된 빛의 색상을 시각화하였다. 이 논문에서는 제5충의 두께가 두꺼워지면서 반사광의 색상이 붉은 색상에서 푸른 색상으로 이동하였다. 색상의 분석은 Photosop5.0을 이용하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.05a
• /
• pp.258-260
• /
• 2008

본 논문에서 다중경로 전파환경에서 전파특성을 연구하였다. 목표지점에서 전계의 세기는 직접파와 지면 반사파의 합으로 구성된다. 이 논문에서는 지면의 반사를 고려하여 목표물 근처 공간의 3차원 전계분포를 계산하는 프로그램을 개발하였다. 실제 목표물의 궤적에 따라 목표물의 수신기에서의 신호세기를 예측하는 3차원 모델을 개발 하였다.

• Journal of the Korean Society for Railway
• /
• v.18 no.4
• /
• pp.289-300
• /
• 2015

An important source of noise from railways is rolling noise caused by wheel and rail vibrations induced by acoustic roughness at the wheel-rail contact. In conventional approaches to predicting rail noise, the rail is regarded as placed in a free space so that the reflection from the ground is not included. However, in order to predict rail noise close to the rail, the effect of the ground should be contained in the analysis. In this study the rail noise reflected from the ground is investigated using the wavenumber domain finite element and boundary element methods. First, two rail models, one using rail attached to the rigid ground and one using rail located above rigid ground, are considered and examined to determine the rigid ground effect in terms of the radiation efficiency. From this analysis, it was found that the two models give considerably different results, so that the distance between the rail and the ground is an important factor. Second, an impedance condition was set for the ground and the effect of the ground impedance on the rail noise was evaluated for the two rail models.

• Bulletin of the Korea Photovoltaic Society
• /
• v.4 no.2
• /
• pp.6-13
• /
• 2018

최근 산업용 태양광 발전시장에서 주목 받고 있는 양면수광형 태양전지의 경우 지면 반사광(Albedo)의 영향으로 추가적인 광생성(Photogeneration)이 발생하여 태양전지의 전환효율(Conversion efficiency)을 증가시켜 주기 때문에 시장에서 수요가 증가하고 있다. 이러한 장점에도 불구하고 몇 가지 문제에 대한 논의가 진행되고 있는데 그 중에서 가장 중요한 부분은 양면수광형 태양전지의 효율을 정의하는 부분이다. 양면수광형 태양전지의 효율을 정의하기 위하여 여러 가지 연구가 진행되었지만 현재까지 국제적인 기준이 제정되지 않아 정확한 효율의 정의가 어려운 상황이다. 양면수광형 태양전지의 성능 확인을 위한 측정 방식은 단일광원(Single light source) 조사 방식, 단일광원 분할(Single light splitter) 조사 방식, 이중광원(Double light source) 조사 방식으로 나눌 수 있다. 본고에서는 이중광원 조사 방식을 이용하여 후면 반사광의 광원을 개별적으로 정의함으로써 실제 발전 환경과 동일한 조건의 광량 정의를 통하여 다양한 지면 반사 조건에 대하여 정확한 태양전지의 전환효율을 측정하고 이를 통하여 다이오드 특성을 추출할 수 있는 측정 방식에 대하여 논하고자 한다.