• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2013

The mission of a lot of satellites on geostationary orbit is the communication and/or the broadcasting. These satellites need a big power, so these have a large solar array. Recently, the new satellite for Earth environment monitoring is developing on geostationary orbit. The payload of Earth monitoring satellite requires better thermal condition on detector. Therefore this satellite uses a boom for the attitude stability instead of rejecting one-side solar array as a heat source. The other hand, it uses some momentum wheels being a more momentum capacity to control the large disturbance by solar pressure due to the asymmetric solar array configuration. In this paper, the analysis on the wheel allocation and the wheel off-loading for COMS is summarized and the results are verified by telemetry of COMS. COMS has no boom and a perfectly asymmetric solar array configuration, and it is operating well on geostationary orbit.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.106-113
• /
• 2017

Attitude determination algorithms for aircraft and land vehicles use earth gravitational vector and geomagnetic vector; hence, magnetometers and accelerometers are employed. In dynamic situation, the output from accelerometers includes not only gravitational vector but also motional acceleration, thus it is hard to determine accurate attitude. The acceleration compensation method treated in this paper solves the problem to compensate the specific force vector for motional acceleration calculated by a GPS receiver. This paper analyzed the error from the corrected vector regarded as a constant by conventional acceleration compensation method, and improve the error by rederivation from measurements. The analyzed error factors and improvements by the proposed algorithm are verified by computer simulations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.410-418
• /
• 2018

This paper describes the design, analysis, and verification tests of the Dual-axis X-band antenna pointing mechanism(XAPM) that has been developed for the Earth observation mission at low Earth orbits. Based on the experience of development and operation of the similar system, we defined the main points and requirements of the system design and confirmed the characteristics of the system through the verification test of the launch and orbit environment test of the engineering qualification model. Through the characteristics and verification techniques of the system acquired during this process, improvement points of the later qualification model are derived.

• Economic and Environmental Geology
• /
• v.50 no.5
• /
• pp.415-422
• /
• 2017

This study focuses on the sustainable development and intelligence information society, analyzing the results of science and technology forecasts from Korea and Japan for 2040-2050. Future geological environment and disaster technologies are presented, such as base geology, geophysical geological disaster, weather adjustment, $CO_2$ reduction, environmental disaster, and smart ecocity developments. For the future technologies in energy and resources technology, space resources development and nuclear fusion will be realized by 2040 and 2050. Moreover, new material and resource technologies will be applied to replace existing energy and mineral resources by 2040. Japan has introduced intelligent information viewpoints and presented new technologies.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.39-47
• /
• 2005

In this paper, a method of station keeping strategy using relative orbital motion and numerical optimization technique is presented for geostationary spacecraft. Relative position vector with respect to an ideal geostationary orbit is generated using high precision orbit propagation, and compressed in terms of polynomial and trigonometric function. Then this relative orbit model is combined with optimization scheme to propose a very efficient and flexible method of station keeping planning. Proper selection of objective and constraint functions for optimization can yield a variety of station keeping methods improved over the classical ones. Results from the nonlinear simulation have been shown to support such concept.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.9
• /
• pp.787-798
• /
• 2015

The emergence of mid-to-small satellites has created a need for rapid development with a relatively low cost. However, the development of mid-to-small satellites requires considerable time and cost in early phase, in particular, during the development of mission and system requirements through iterations of conceptual design and mission design. In this research, Spacecraft Conceptual Design Tool(SCDT) which is based on Graphical User Interface(GUI) was developed to reduce the time and cost for early phase development. Furthermore, GUI-based software can make the input values to be editable easily and show users design results in various way. In this paper, the development results of MATLAB GUI-based SCDT are introduced.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.257-264
• /
• 2015

The structure of SpaceEye-1 developed by Satrec Initiative is designed to carry out various earth observation missions in harsh launch and orbit environments. This paper describes methodology of the structure design and analysis performed during the SpaceEye-1 development. The SpaceEye-1 structure is designed not only to endure the static/dynamic loads but also to protect a main payload and all other components under the launch environments. The structural design requirements were derived from the requirements of the launch vehicle, payload, and other subsystems from the initial development phase. Three-dimensional modeling process was used to verify geometric compatibility of the structure with the other subsystems, and finite element analysis was used to confirm whether the designed structure satisfied all the mechanical requirements derived from the launch vehicle and payload.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.807-817
• /
• 2012

An optical payload needs to be validated its image performance after launched into orbit. The image performance was validated by observing star because ground site contains uncertainties caused by atmosphere, time of the year, and weather. Time Delayed and Integration(TDI) technique, which is mostly used to observe the ground, is going to be used to observe the selected stars. A satellite attitude scenario was also developed to observe the selected stars. The scenario is created to enable TDI to operate. Rotation angles of optical payload are determined in order for the selected stars to properly be passed at a desired angular velocity about rotation axis. The result of this research can be utilized to validate the quality of optical payload of a satellite in orbit. In addition, a quaternion for pointing selected stars is calculated minimizing the path from a given arbitrary attitude of satellite.

• Journal of Aerospace System Engineering
• /
• v.12 no.2
• /
• pp.23-29
• /
• 2018

Contrail is type of clouds which are formed by a condensation of water vapour from the aircraft exhaust when the aircraft is flying the cold atmosphere. Since contrails have considerable effect on greenhouse-effect and military stealth efficiency, researches about contrail avoidance technology has been conducted for decades. However, none of the previous researches concerning contrail avoidance was carried out in Korea. Thus, review of the previous study regarding contrail reduction is absolutely needed. In this paper, researches conducted by several countries are categorically introduced, and practicabilities of their methods are analyzed. This paper also suggests some practical and systematized way to conduct future researches about contrail avoidance.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.163.1-163.1
• /
• 2012

이 연구는 우주물체에 대한 광학감시 및 추적을 수행하기 위한 선행연구로, 궤도전파 시뮬레이터를 개발하여 궤도상 위성의 광학관측가능성을 분석하고 광학관측 여부를 판단하는 것을 목표로 한다. 연구의 주 내용은 주어진 궤도정보를 바탕으로 하는 태양동기궤도(Sun-Synchronous Orbit; SSO) 위성, Dawn-dusk 위성, 저궤도(Low Earth Orbit; LEO) 위성, 정지궤도(Geostationary Orbit; GEO) 위성 등 궤도상 위성의 추정궤도 전파와 자국위성의 광학관측가능성 분석으로 구성된다. 각각의 궤도전파 정밀도 및 광학관측가능성 분석성능을 확인하기 위해 AGI(Analytical Graphics Incorporated)사의 STK(Satellite Tool Kit) 시뮬레이션 프로그램을 사용하여 개발된 궤도전파 시뮬레이터와 비교하였다. 시뮬레이션 과정에서 광학관측의 제한조건을, 지구반영(penumbra)과 태양직사광(direct sun)에서만 관측하며, 고도(elevation angle)의 최소값은 20도, 태양고도(Sun elevation angle)의 최대값은 -10도로 설정하였다. 광학관측이 이루어지는 가상의 관측소는 임의로 선정하였으며, 기본적인 관측시간은 1년으로 잡고, 계절의 변화에 따른 광학관측가능성 궤적의 변화를 보기위해 춘하추동에 대해서 각각 3일이내의 기간 동안 시뮬레이션을 수행하였다. 결과적으로, 우주물체 광학감시 및 추적을 수행하기 위한 광학관측가능성 분석성능은 궤도전파 시뮬레이터 및 초기궤도요소 정밀도, 좌표변환과정 오차 등의 영향을 받으며, 설정된 제한조건에 따라 광학관측 지속시간의 차이가 발생한다. 연구결과를 통해 궤도상 위성의 궤도를 추정하기 위한 위성의 궤도전파 시뮬레이터를 개발하고, 자국위성의 관측가능성 분석을 통해 광학감시 및 추적시스템의 운영이 원활히 이루어질 수 있도록 한다.