• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.253-263
• /
• 2018

This paper examined the U-shape curvilinear relationship between team level conflict management and individual level turnover intention by using exit-voice theory, bandwagon effect, and social loafing theory. In addition to the non-linear relationship between team-level conflict management and individual-level turnover intentions, we also examined how trust in leaders has a moderating effect on this relationship. The samples were collected from a South Korean manufacturing company with 331 team members from 48 teams and items were measured twice to avoid common method biases. The intercepts-as-outcomes model of hierarchical linear modelling was conducted to verify the hypothesis. Results supported the cross-level curvilinear hypothesis which indicated that employees' turnover intention sharply decreased if the activeness of group conflict management was small and increases slightly, but this tendency moderated as activeness increases. After passing the lowest point, their turnover intention increased in the end. However, the moderation effect of trust in leader on this relationship was not statistically significant and hypothesis 2 was rejected. This paper explained the effects of group dynamics of conflict management on individual turnover intention. Such evidence may elucidate the importance of managing the social loafing behavior on conflict management process. This paper examined the sequential, multi-level, and curvilinear relationship between conflict management and turnover intention. Organizations and managers will benefit from avoiding the human resource loss by managing the conflict management process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.166-181
• /
• 2018

The aim of this review was to determine the status of acupuncture therapies in reducing obesity in obese patients and to determine the scheme and effectiveness of acupuncture therapies. Existing reports published between January 1, 2003 and December 31, 2017 in Kiss, Riss, National Assembly Library, Pubmed and CINAHL databases were searched electronically with the keywords obesity, acupuncture, auricular acupuncture, and electroacupuncture. After checking the original sources of the articles, 19 articles were included in the review. In a qualitative evaluation of the papers using a checklist from the Scottish Intercollegiate Guideline Network, one study scored 9 out of 10 points, 15 studies scored 7-8 out of 10 points, two studies scored 6 out of 10 points, and one study scored 3 out of 10 points. In the acupuncture therapy schemes, acupoints to reduce obesity included shemen, hunger, LI-11 (Quchi), LI-4 (Hegu), St-25 (Tianshu) and St-44 (Neiting). Acupuncture therapies were conducted for an average of 16.9 total sessions. In the studies that involved 20-day or 72-day duration for acupuncture therapies, the frequency of acupuncture therapies was 1 time/1-2 days. In the studies that involved 4- to 18-week duration for acupuncture therapies, the frequency of acupuncture therapies was 1-3 times/week. This study found acupuncture therapies were effective in reducing obesity, and acupuncture therapies reduced anthropometry, blood glucose and lipids and changed blood hormones. In the future, there is an urgent need for well-planned studies of the effectiveness of acupuncture therapies for reducing obesity in obese patients.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.801-806
• /
• 2018

Germanium crystals have a dead layer that causes efficiency deterioration because the layer is not useful for detection but strongly weakens the photons. Thus, when the data provided by the manufacturer is used in the detector simulation model, there is a slight difference between the calculated efficiency and the measured efficiency.The shape and dimensions of the high purity germanium (HPGe) detector were determined by CT scans to accurately characterize the shape for the Monte Carlo roll simulation. It is found that the adjustment of the dead layer is a good match with the relative deviation of ${\pm}3%$ between the measurement efficiency and the simulation efficiency at the energy range of 50 - 1500 keV. Simulation data were compared by varying the thickness of the dead layer. The new Monte Carlo simulations were compared with the experimental results to obtain new blank layer thicknesses. The difference in dead layer results for the 1.5 mm thick end cap simulation model in 1.4 and 1.6 mm thick End Cap simulation models was a systematic error due to the accuracy of the end cap dimensions. After considering all errors including statistical errors and systematic errors, the thickness of the detector was calculated as $1.02{\pm}0.14mm$. Therefore, it was confirmed that the increase in the thickness of the dead layer causes the effect to be effected on the efficiency reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.711-720
• /
• 2018

The purpose of this study was to explore the impact of lifelong educators' core competencies as a mediating effect on adult learners' ability to function. The subject of this study was aimed at adult learners participating in lifelong education programs at lifelong educational institutions located in Gyeonggi Province. and was finally used for a total of 520 additional analyses. The main findings of this study are as follows: first, regarding the correlation between the core competence of lifelong educators and the life ability of adult learners, core competence has a static association with wisdom. In addition, wisdom has a high static association with life expectancy. Second, the core competence and wisdom of lifelong educators were found to have a significant static impact on adult learners' life abilities, accounting for 66.8%. Specifically, the most significant predictors of life's ability were creative problem solving, consideration for others, and acceptance of change, which were lower factors of wisdom. Third, the impact of a lifetime educator's core competence on adult learners is not significant. It was found that core competence has an indirect influence on life capacity through the mediating effect of wisdom, and that wisdom has directly interfaced the relationship between core competence and life ability. Taken together, these results proved that the core competence and wisdom of a lifelong educator are important variables for adult learner's life abilities. Based on this, the core competence of lifelong educators being taught in the field of lifelong education should be enhanced, and the ability of adult learners to utilize the wisdom that has been developed through the experiences of adult learners, to improve their life skills.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.506-512
• /
• 2018

The fine dust generated in the home and restaurant business occupies a low ratio of about 4% of the total fine dust emissions. However, at the foodservice business, the rate of change of the pollutant concentration is very high, so that the temporary fine dust concentration can be measured up to 60 times. The pollutants generated from non-industrial combustion plants consist of particulate fine dust and gaseous organic compounds. To remove these pollutants, cleaning dust collection system, which is an effective system for simultaneous removal of gaseous and particulate matter, is applied. This is a method of increasing the probability of diffusion capture of the Brownian motion by pressurized liquid injection method using the atomizing nozzle. The dust removal efficiency of the fine dust collecting system was analyzed by nozzle spraying air pressure condition and angle using the manufactured fine dust removing system. As a result, it was confirmed that the efficiency of removal of fine dust and gaseous organic compounds was more than 90%. The developed system is expected to be highly usable in the future because it can remove particulate dust from the existing plant hood system without any installation cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.541-549
• /
• 2018

This paper deals with the braking dynamic behavior of diesel electric locomotive pulling domestic cargo and passenger vehicles. Friction coefficient, pneumatic pressure, and running resistance affecting the braking system were tested. For the friction coefficient, the Dynamo test was performed with reference to UIC 541-4. The results are analyzed by multivariate regression and the relationship between braking force and ititial velocity is presented. The pneumatic pressure were classified into service braking and emergency braking. In order to reflect the characteristics of the brake valve and piping, the pressure rising over time was measured in the vehicle. In order to reflect the external force acting on the vehicle, we carried out the test of EN 14067-4 and presented the second order polynomial formula on a running resistance. The running resistance test results were compared with other countries. The dynamic behavior of a diesel electric locomotive running on a straight flat track based on vehicle resources, friction coefficient, braking pressure, and running resistance is simulated using the time integration presented in EN 14531-1. The simulation results were compared and verified with the vehicle braking test results. The results of this study can be used to analyze the dynamic braking behavior of a train. Also, it is expected that various parameters affecting braking in vehicle design can be analyzed and used as basic data for braking performance improvement.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.417-424
• /
• 2018

The purpose of this study was to examine how combined exercise and acaiberry intake make effects on insulin and glycated hemoglobin of middle-aged women. The middle-aged women in their 40s and 50s were classified into three groups - group A which only had acaiberry intake, group B which both had acaiberry intake and combined exercise, and group C which only underwent the combined exercise. The combined exercise was held three times a week for 8 weeks, each for 60 minutes including warming up and cooling down. The aerobic exercise was carried out for 20 minutes with a treadmill walk with HRmax 50-60% and the resistance movement was carried out for 20 minutes with a strength of 50-60% based on 1RM. The participants were told to have the acaiberry drink before breakfast and dinner, by melting 5g of acaiberry powder to water. 2-way RGRM ANOVA was carried out to process the data for comparing each groups. In conclusion, the 8-weeks of combined exercise and acaiberry ingestion therapy did not improve the insulin and glycated hemoglobin. It is more likely to show clear changes in both elements with longer treatments and controlling the amount of ingestion and exercise intensity.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.59-66
• /
• 2018

The utilized coefficient of friction (UCOF) as a ratio of the shear force to the normal force on the ground during walking is used to identify the point at which slip is likely to occur. Shoe walking will change the utilized coefficient of friction by shoe design such as sole thickness and hardness, heel shape, and outsole pattern. In this study, subjects are 21 adults (10 female, 11 male, age: $25.2{\pm}2.3yrs$, height: $165.6{\pm}7.2cm$), analysis variables were walking speed, GRF, when the UCOF is maximal, and Tangent of CoP-CoM angle, and correlation analysis with the utilized friction coefficient (UCOF). As a result, First, for the shod walking the time point which UCOF is maximum about heel strike was faster and the magnitude was larger than for barefoot walking. Second, the correlation between the tangent of CoP-CoM and UCOF of right foot was higher at the left heel striking point (UCOF2_h) which occurred in the post propulsion phase than at the right heel striking point (UCOF1_h). This suggests that the right foot UCOF is related to the braking phase of left foot( which is the propulsion phase of right foot) rather than the braking phase of right foot.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.529-535
• /
• 2018

The range extender vehicle runs on a mechanism that allows the small power generation engine to start in the most efficient specific operating range to charge the battery and extend the mileage. In this study, we developed a step motor type intake air supply system that replaces existing throttle body system to develop a simple low cost control logic system. The system was applied to the existing base engine, and in order to improve the performance by increasing the amount of intake air, the effect of changing the length of the intake and exhaust manifold was experimentally examined. As a result, the Type B intake air control actuator operated by one step motor showed higher performance than the Type A in all the operation region, but the performance was lower than that of the base engine due to the increase of flow resistance. To improve this, it was confirmed that the engine performance was improved at both speeds of 2200rpm and 4300rpm when the 140mm adapter was installed in the intake manifold and when the newly designed 70mm exhaust manifold was applied. Through this process, high - precision operation control was realized by connecting the generator load to the optimized engine for the range extender electric vehicle. Experimental results showed that the speed change rate was within ${\pm}2.5%$ at 2200rpm in 1st stage and 4300rpm in 2nd stage and the speed follow-up result of 610 rpm/s was obtained when the speed was increased from 2200rpm to 4300rpm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.319-325
• /
• 2018

The use of 3D printing (Additive Manufacturing) technology has expanded from initial model production to the mass production of parts in the industrial field based on the continuous research and development of materials and process technology. As a representative polymer material for 3D printing, the polyamide-based material, which is one of the high-strength engineering plastics, is used mainly for manufacturing parts for automobiles because of its light weight and durability. In this study, the specimens were fabricated using Selective Laser Sintering, which has excellent mechanical properties, and the flexural characteristics were analyzed according to the temperature of the two types of polyamide 12 and glass bead reinforced PA12 materials. The test specimens were prepared in the directions of $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ based on the work platform, and then subjected to a flexural test in three test temperature environments of $-25^{\circ}C$, $25^{\circ}C$, and $60^{\circ}C$. As a result, PA12 had the maximum flexural strength in the direction of $90^{\circ}$ at $-25^{\circ}C$ and $0^{\circ}$ at $25^{\circ}C$ and $60^{\circ}C$. The glass bead-reinforced PA12 exhibited maximum flexural strength values at all test temperatures in the $0^{\circ}$ fabrication direction. The tendency of the flexural strength changes of the two materials was different due to the influence of the plane direction of the lamination layer depending on the type of stress generated in the bending test.