• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.42-48
• /
• 2001

The spent liquor (BSL) obtained from alkaline sulfite-anthraquinone (AS-AQ) cooking of pine bark was applied as a deinking agent. In the ONP deinking system, although BSL removed the small size of ink particles (${\geq}$$12.5{\mu}m$), it did not improve the brightness of pulp. The brightness of pulp slightly improved when treated with BSL at 150~$180^{\circ}C$. However, the brightness of the pulp was lower than that of a commercial deinking agent (oleic acid). It seems that BSL treated with a high temperature still had a high dispersing ability on the ink particles. Intensive oxidations were introduced, and remarkable deinking effects were observed at 13kgf/$cm^2$ oxygen pressure, $160^{\circ}C$ and 2h. When BSL treated at 13kgf/$cm^2$ oxygen pressure, $170^{\circ}C$ and a time period of 30~90 min is added to the pulp, at 0.1% or lower, the deinking effect became higher than that of oleic acid. On the other hand, additional alkali treatments during the oxidation possibility as a deinking agent when oxidized. However, since the oxidized BSL still has a high dispersing ability and lower molecular weight, several modifications need to be done in the near future in order to be applied as a high quality deinking agent.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.2
• /
• pp.54-60
• /
• 1994

The pine bark from mechanical pulp industry was cooked with bisulfite liquor, and the chemical and physical properties of the spent liquor after cooking for 90 minutes, which allowed partial defibration were determined. Lignosulfonate or lignin-related materials in the spent liquor have a molecular weight of approximately 3,000, which is lower than that of commercial lignosulfonate (C-LS) prepared from wood. The sulfonic equivalent weight calculated by colloid titration was 307 for C-LS, 238~239 for spent liquor. The contents of lignosulfonic acid and phenolic hydroxyl groups on $C_9$ unit of lignin in the spent liquor were 0.98~0.99, and 1.51~1.66, respectively. These values were remarkably higher than those of C-LS. Especially the content of phenolic hydroxyl group was almost twice that of C-LS. The viscosity of spent liquor after freeze drying was very low compared to C-LS. The dispersing ability of spent liquor was almost equivalent to or more than that of C-LS.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.156-157
• /
• 2022

The purpose of this study is to propose a 40MPa mortar mixed design model that applies the neural network theory to minimize wasted effort in trial and error. A mixed design model was applied to each of the 60 data using fly ash, blast furnace slag fine powder and thickened rice husk powder. And in the neural network model, the optimized connection weight was obtained by repeatedly applying it to the MATLAB. The completed mixed design model was demonstrated by analyzing and comparing the predicted values of the mixed design model with those measured in the actual compressive strength test. As a result of the mixed design verification experiment, the error rates of the double mixed non-cement mortar using blast furnace slag fine powder and rice husk powder at a height of 40MPa were 3.24% and 3.4%. Mixed with fly ash and rice husk powder had an error rate of 3.94% and 5.8%. The error rate of the triple mixed non-cement mortar of the rice husk powder, fly ash, and blast furnace slag fine powder was 2.5% and 5.1%.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.75-82
• /
• 2013

The traditional Hanji-making was confronted with lots of industrial disadvantages and economic problems, due to the original hand-made process. Recently, the studies on the automation of overall Hanji manufacturing process is carried out by applying the commercial chemical pulping method in order to expand industrial application or efficiency of non-wood fibrous materials. However, the application of commercial pulping methods to the bast tissues of paper mulberry leads to the chemical and mechanical deterioration of cellulosic fibers. In this study, the optimal cooking method using the bast parts of paper mulberry produced by an auto-scraping device was applied to minimize the damage of fiber strength for the paper yarn manufacture. The pre-steaming treatment and alkaline pulping systems were evaluated in removal efficiency of lignin and pectin materials within the bast tissue of paper mulberry. With the application of pre-steaming treatment and 2 stage pulping system using potassium carbonate and then sodium hydroxide, kappa values were decreased two times more in lignin removal than the single stage of pulping method. It was also identified from SEM images and ATR-FTIR spectra that the pectin components within cellular structure of bast tissue were easily removed and the debarked bast parts by a auto-scraping device were easily defiberized by 2-stage pulping sequence using potassium carbonate/sodium hydroxide pulping system.

• Environmental engineer
• /
• s.323
• /
• pp.22-27
• /
• 2013

종이 펄프 공장의 폐수는 다른 공업에 비해서 폐수량이 많고 오염도가 높다. 목재로부터 종이를 제조하는 경우에 수율은 종이의 종류와 제법에 의해 큰 차이가 있어서 한마디로 말하기는 어렵지만 평균 50~70%로 보는 경우, 목재 성분의 30~50%는 용해 또는 SS의 상태로 폐수중에 존재하기 때문에, 이들이 직접 하천이나 바다에 방류되면 오염의 원인이 된다. 그 때문에 각 공장에서는 목재자원의 종합적인 이용의 입장으로서 제품의 수율을 좋게 하고 동시에 폐수의 양을 감소시키고 폐수에서 유용한 자원을 회수하거나 증해약품의 회수 등을 위하여 연구 및 노력을 계속하고 있는 것이 현 상태이다. 우리 나라의 거의 모든 제지회사에서는 물리적, 화학적 처리법과 생물학적 처리법 중 호기성 처리방법이 주 처리방법으로 사용되고 있으며 탈묵 폐수나 리그닌을 다량 함유하는 폐수의 경우에는 혐기성 처리방법을 이용하기도 한다. 본 실험에서는 우유팩을 재생하여 화장지 제조의 원료로 이용하는 G제지공장의 폐수를 이용하였고, 공장의 원폐수를 부상법으로 1차 처리한 처리수를 실험실로 운반하여 활성슬러지법으로 실험하였다. 처리효율의 영향인자인 HRT를 G제지공장에 맞추어 12시간으로 조정하고 적절한 F/M비(0.23)를 위해 COD와 MLSS가 유지된 후부터 실험을 시작했다. $20^{\circ}C{\sim}560^{\circ}C$까지 $10^{\circ}C$간격으로 온도를 변화시키면서 미생물의 상태변화를 관찰하고, 또한 각 용도에서의 처리수질을 비교해 보았다. 실험조건은 pH는 중성상태(6.5~7.5), DO는 $2{\sim}4mg/{\ell}$, 영양원은 BOD : N : P = 100 : 5 : 1로 맞추고 BOD, COD, SS, SVI를 측정하였으며, 현미경을 통하여 미생물과 Floc를 관찰하였다. $20^{\circ}C$부터 종균제를 초기 운전시 $200mg/{\ell}$ (분말상)을 폭기조에 투여하고 매일 $200mg/{\ell}$를 정기적으로 투입하여 온도변화에 따른 미생물의 상태 및 처리수질을 비교해보았다. 특히 종균제로는 기존의 G제G지공장에서 사용하는 신일 미생물(Bio sound S)종균제와 청림C&C의 종균제(Cell bio P)를 비교 관찰하였다. 고온성 종균제를 두배 투입하여 투입량에 대한 처리효율을 비교하였으며 종균제를 사용하지 않고 운용함으로써 그 차이도 비교할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.103-110
• /
• 2001

Bio-kraft pulping of Populus alba${\times}$glandulosa pretreated with white-rot fungus, Phanerochaete chrysosporium KCCM 34740, was investigated The biopulping efficiency was evalued based on fungal pretreatment time and properties of bio-kraft pulp (pulp yield, freeness, WRY, kappa number and brightness) in comparison to the controls. Pretreatment of poplar wood chips with Phanerochaete chrysosporium KCCM 34740 for 10days resulted in a some increase in screened yield (by 2%). According to increase of fungal incubation time, decrease in freeness (CSF) and increase in WRY were observed And bio-kraft pulping also led to improvement of physical properties of handsheet. As a result of bio-beating effect, we expect the saving of chemicals in kraft cooking process and energy consumption in beating process.

• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.143-152
• /
• 1997

The decayed wood by Fomes pini (Thore) Lloyd required a smaller H factor than the sound wood for pulping to permanganate number 20. The H factors for the decayed wood pulping by the kraft and soda processes were reduced by 15% and 17%, respectively, in the presence of 1% anthraquinone. The wood components degraded by fungi are normally more readily solubilized in alkali than the corresponding components in sound wood. The nonphenolic ${\beta}$-O-4 type lignin model compound, veratrylglycerol-${\beta}$-guaiacyl ether(I), and phenolic model compound, syringylglycerol-${\beta}$-syringyl ether(III), were degraded by the white-rot fungi to yield ${\alpha}$-guaiacoxy-${\beta}$-hydroxypropioveratrone(II) from the former and ${\alpha}$-syringyloxy-${\beta}$-hydroxypropiosyringone(IV) from the latter. Structures of the degradation products indicated that C ${\alpha}$-oxidation could occur with white-rot fungi. It has been shown that the alkaline cleavage of ${\beta}$-aryl ether bonds in the lignin units is accelerated by the presence of ${\alpha}$-carbonyl groups.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.82-86
• /
• 1976

'Radiation No. 6' the first mutant variety of naked barley in Korea was developed from Bangju as .a mother variety. The new variety was characterized by early maturity, short-culm and stablized high yield by the increased number of spikes. 'Radiation No. 6' was registered as a leading variety in 1974, .after 7 years since induction of mutation started.of mutation started.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.46-59
• /
• 2015

This study was conducted focusing on the stability on materials of cultural property when the fumigant containing ethylene oxide was applied among some kinds of fumigant. Four kinds of specimens from paper, textile, metal and pigment were prepared to compare color difference, weight, surface condition before and after treatment and FT-IR analysis was carried out on specimens of paper and textile. In the case of fumigation treatment, it was conducted by two groups : one is made up of specimens with the non-fumigation as control groups, the other is made up of specimens treated with ethylene oxide + $HFC_{134a}$ and ethylene oxide + $CO_2$ as experimental groups. The result of color difference showed that there were color differences on the specimens of Hanji(Korean traditional paper), silver, cotton, ramie and yellow pigment. Especially, it was found out there was color change more than 6.0 on average from the silver specimen. However, in the silver specimen's case, color change in the non-fumigated specimen was relatively higher than those of fumigant-treated specimens, therefore, it is judged that fumigant doesn't have a decisive effect on color change in specimens, but required caution while fumigating. The result of weight measurement, there were totally 0~2% weight changes and the slightest change was found in the metal specimen, the biggest change in the papers. The result of microscopic observation on the surface of specimens showed color changes and especially, the biggest change on the silver specimen was observed. But no change in components was identified from FT-IR analysis of papers and textiles.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.24-30
• /
• 2003

In order to develop structural 'bamboo zephyr board', properties of boards produced by various methods making zephyr were estimated. All of boards were tested with KS(Korean Standards) F 3014 Particle board, and results were summarized as follow. The zephyr boards produced by final 1.5 mm roller space had the best properties(MOR, MOE and IB strength) among boards produced by different final roller space. Also, they had the best properties(MOR and MOE) in bending test after 1 hour soaking treatment after 2 hour-boiling in water, which were similar to properties of boards in dry-condition. Thickness swelling(TS) of all boards was less than 12% required to the Korean Standards A 3014. Zephyr boards produced by final 1.5 mm roller space also had the lowest values among all of boards. Boards produced by non-treatment (in green condition) had the better strength than those of boards produced by different pre-treatment methods(boiling in water and in 0.3% NaOH) in bending test.