• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.165-171
• /
• 2006

In Korea, a real-time effective dose measurement system is in development. The system uses 32 high-sensitivity MOSFET dosimeters to measure radiation doses at various organ locations in an anthropomorphic physical phantom. The MOSFET dosimeters are, however, mainly made of silicon and shows some degree of energy and angular dependence especially for low energy photons. This study determines the correction factors to correct for these dependences of the MOSFET dosimeters for accurate measurement of radiation doses at organ locations in the phantom. For this, first, the dose correction factors of MOSFET dosimeters were determined for the energy spectrum in the steam generator channel of the Kori Nuclear Power Plant Unit #1 by Monte Carlo simulations. Then, the results were compared with the dose correction factors from 0.652 MeV and 1.25 MeV mono-energetic photons. The difference of the dose correction factors were found very negligible $(\leq1.5%)$, which in general shows that the dose corrections factors determined from 0.662 MeV and 1.25 MeV can be in a steam general channel head of a nuclear power plant. The measured effective dose was generally found to decrease bit $\sim7%$ when we apply the dose correction factors.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.384-390
• /
• 2016

It is important to have a pipeline leak-detection system that determines the presence of a leak and quickly identifies its location. Current leak detection methods use a acoustic emission sensors, microphone arrays, and camera images. Recently, many researchers have been focusing on using cameras for detecting leaks. The advantage of this method is that it can survey a wide area and monitor a pipeline over a long distance. However, conventional methods using camera monitoring are unable to target an exact leak location. In this paper, we propose a method of detecting leak locations using leak-detection results combined with multi-frame analysis. The proposed method is verified by experiment.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2163-2165
• /
• 2001

화력 발전소 드럼수위의 제어는 보일러 시스템의 효율적인 운용을 위해 중요한 위치를 차지하고 있다. 드럼수위의 제어 목적은 드럼수위를 외란에 관계없이 항상 설정치로 유지하는 것이다. 정상 운전중에는 드럼의 중앙이하 부분에는 물이 차 있고, 상부에는 증기가 차 있으나 만일 수위가 너무 높아지면 carry over 현상이 발생하며 반대로 너무 낮으면 드럼 하부의 과열 및 튜브의 손상을 초래하여 대사고를 유발하게 되므로 드럼수위는 항상 정상으로 유지해야 한다. 드럼수위 제어루프는 처음에는 드림수위만을 제어입력으로 취하는 PI 제어기에 의해 이루어지다가, 주증기량이 일정량 이상 유지되면 드럼수위가 일정한 설정치를 유지하도록 급수량, 드럼수위, 주증기량에 의한 PI-PI 캐스케이드 형태의 제어로 절환되어 제어가 이루어진다. 또한 드럼 수위는 차압검출기에 의해서 측정되어지는데, 드럼의 압력에 따라 물과 증기의 밀도가 변하기 때문에 차압검출기에 의한 드럼수위 지시치는 드럼압력에 의한 보상도 요구되어진다. 본 논문에서는 중용량 화력발전소를 대상으로 드럼수위 보상과 드럼수위 제어기를 구현하고, 적용하여 실제 발전출력 증발시의 드럼수위 제어결과를 보임으로서 구현한 드럼수위 제어기의 효용성을 보인다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.442-448
• /
• 2007

The ultrasonic inspection system for the expansion/transition area of steam generator tube was successfully developed. Variety of artificial flaw and real track specimen was tested using the UT system to verify the performance of the system. All artificial flaws of which through-wall depth larger than 10% was clearly detected by UT system. Measurement results of through-wall depth of flaws larger than 20% had good linearity and reproducibility with 3.27 of standard deviation. Results of real crack specimen test suggested that the detection limit of real crack strongly depends on the track morphology. A potential for measurement of PRL(percentage of remaining ligament) was recognized by the real crack specimen test.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.2
• /
• pp.198-202
• /
• 2002

Beacuse intergranular attack (IGA), one of the locallized corrosion forms occurring on steam generator tubes, can not be fabricated by an electric discharge machining method, there are few data for the eddy current test (ECT) characteristics of IGA. In this paper, the characteristics of eddy current signals are evaluated using nonexpanded tubes with IGA defects formed in 0.1 M sodium tetrathionate solution at $40^{\circ}C$. The detectability and sizing accuracy of IGA were discussed in terms of the coil type and frequency of the ECT probes.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.254-258
• /
• 2007

Several physicochemical properties including water solubility, vapor pressure, and hydrolysis of bistrifluron benzoylphenylurea insecticide developed in Korea, were measured based on OECD guidelines for testing of chemicals and Toxic Substances Control Act Test guidelines. Water solubility was low showing 30 ${\mu}g/l$ at $25^{\circ}C$ and in hydrolysis study, half-life at $20^{\circ}C$ was 10.9 days (pH 9.0) and was stable in pH 7.0 solution. At $40^{\circ}C$ hydrolysis rate was 20.6 days (pH 7.0) and 1.5 days (pH 9.0). The vapor pressure of bistrifluron was not obtained from vapor pressure experiments at $25^{\circ}C$ because the bistrifluron was not detected. Therefore, the vapor pressure was determined to be ${\leq}\;2.05{\times}10^{-8}$ torr which was calculated to apply the detection limit (50 ng) of bistrifluron. And this value is suggests it would not give environmental contamination by volatilization.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.98-103
• /
• 2009

The nuclear power plants have been safely operated by plugging the steam generator tubes which have the crack indications. Tube rupture events can occur if analysts fail to detect crack indications during in-service inspection. There are various types of crack indication in steam generator tubes and they have been detected by the eddy current test. The integrity assessment should be performed using the crack-sizing results from eddy current data when the crack indication is detected. However, it is not easy to evaluate the crack-depth precisely and consistently due to the complexity of the methods. The current crack-sizing methods were reviewed in this paper and the suitable ones were selected through the laboratory tests. The retired steam generators of Kori Unit 1 were used for this study. The round robin tests by the domestic qualified analysts were carried out and the statistical models were introduced to establish the appropriate depth-sizing techniques. It is expected that the proposed techniques in this study can be utilized in the Steam Generator Management Program.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.501-509
• /
• 2001

For the enhancement of ECT reliability on the primary water stress corrosion cracks of nuclear steam generator tubes, of which the occurrence is on the increase, it is important to comprehend the signal characteristics on crack morphology and to select an appropriate probe type. In this paper, the sizing accuracy and the detectability for the inner wall axial cracks of tubes were quantitatively evaluated using the following specimens: the electric discharge machined notches and the corrosion cracks which were developed on the operating steam generator tubes. The difference of eddy current signal characteristics between pancake and axial coil were also Investigated. The results obtained from this study provide a useful information for more precise evaluation on the inner wall axial tracks oi stram generator tubes.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.273-278
• /
• 1999

Simultaneous determination of mercury and arsenic has been studied by reductive vapor generation-ICP-AES. Samples were digested with a microwave digestion system and extracted with acids. Reductive vapor generation was carried out with 6N HCI and 2% $NaBH_4$. Detection limit of Hg and As are found to be 0.06 ppb and 0.08 ppb, respectively. Measured values of Hg and As in inorganic samples agree well with reference value of SRMs, but the recovery of As from organic samples is obtained approximately 80% of the reference values.

• Food Science and Preservation
• /
• v.24 no.3
• /
• pp.464-471
• /
• 2017

The purpose of this study was to evaluate the effect of superheated steam drying on physicochemical and microbial characteristics of Korean traditional actinidia (Actinidia arguta) leaves. Actinidia leaves were dried at steam temperature of $350^{\circ}C$ and oven temperature of $150^{\circ}C$ for 40-200 sec. Moisture content and water activity decreased with increasing the drying time, while color values including L, a, and b values and total color difference (${\Delta}E$) increased as drying time increased. The relationship between moisture content and water activity showed an exponential fit with high correlation vlaue ($R^2=0.9909$). Total phenolics and flavonoids content and antioxidant activity such as DPPH radical scavenging activity, ABTS radical scavenging activity, and FRAP assay of dried actinidia leaves increased with increasing the drying time up to 160 sec, but dramatically decreased at drying of 200 sec. The numbers of total areobic bacteria of leaves was not detected at drying time over 120 sec and coliform of all the samples was not detected. As a results, the superheated steam was an very effective drying method of increase to the nutritional and sanitary quality of dried Korean traditional actinidia leaves.