• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.599-606
• /
• 2010

In the present study, actuators with diaphragms of different thickness and chambers of different diameter are fabricated to examine experimentally how the behavior characteristics of the actuator diaphragm in a thermopneumatic micropump are affected by diaphragm thickness and chamber diameter under various operating conditions with different values of input voltage and frequency. The actuator comprises a microheater set on Pyrex glass, a chamber, and a diaphragm. For all values of the input energy, as the frequency decreases below 10 Hz, the maximum center deflection of the diaphragm greatly increases irrespective of diaphragm thickness and chamber diameter. At low frequencies, as the heat energy supplied to the chamber increases, the center of deflection of the diaphragm increases; the magnitude of deflection is high for thin diaphragms and for diaphragms whose chambers have small diameters. At frequencies higher than 10 Hz, all the design variables such as diaphragm thickness, chamber diameter, and the input energy have negligible effect on the center deflection of the diaphragm.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.4
• /
• pp.654-659
• /
• 1994

To elucidate the relationship between physical and chemical properties of frying vegetable oils, soybean oil and cottonseed oil were heated in air temperatures from $160^{\circ}C\;to\;220^{\circ}C$ for 60 hours. Acid value, carbonyl value, iodine value, viscosity and content of polymer were remarkably changed as higher heating temperature and/or longer heating time. Correlation coefficient of viscosity to acid value was 0.9843 for soybean oil and 0.9819 for cottonseed oil. In case of viscosity and carbonyl value, viscosity also showed good relationship to carbonyl value as 0.9779 for soybean oil and 0.9797 for cottonseed oil. And correlation coefficient of viscosity to iodine value of soybean oil was 0.9852 and cottonseed oil was 0.9948.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.4
• /
• pp.141-147
• /
• 2016

In this study, homo and copolymers of 2,2,6,6-tetramethyl-4-piperidyl methacrylate(TMA) and synthesized styrene derivative, 2,2,6,6-tetramethylpiperidine-4-vinylbenzyl ether(TVBE) were obtained by radical polymerization and oxidized to produce corresponding polymer radicals. The polymer radicals were mixed with carbon black, binders and coated onto Al current collector. The battery performance is then characterized by fabricating coin cells. As results, the polystyrene based organic radicals show lower oxidize efficiency and discharge capacity than methacrylate based one. However, the former shows better capacities from discharge experiments performed at $60^{\circ}C$ which suggests a possible way to overcome the high temperature fade out of performance in usual organic radical batteries. Also as expected, an excellent C-rate performance is observed in all the cells consisted of organic polymer radicals.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1947-1955
• /
• 2013

The purpose of this paper is to present an photoelasticity technique for measuring the displacement and stress distribution in particle assembly subjected to shallow foundation loading. Photoelastic measurement technique was employed to visualize the force transmission of a particle assembly. A model assembly bounded by a steel frame was built by stacking bi-dimensional circular particles made of polycarbonate elastomer. Each particle was coated by a thin photoelastic sheet so that the force transmission represented by bright light stripes can be visualized. In a contacted particle, both magnitude and orientation of principal stress difference can also be measured via the photoelasticity technique. The different distributions of the contact stresses at the initial loading and near the failure were quantitatively compared. The photoelastic patterns and displacement fields observed in the pre-failure state disappears immediately after the buckling of confined force chains.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.885-890
• /
• 2015

Nanomaterials possess unique mechanical, physical, and chemical properties. They are small, and have an ultrahigh surface area, making them suitable for air filter applications. Electrospinning has been recognized as an efficient technique for fabricating polymer nanofibers. In order to determine the optimum manufacturing conditions, the effects of several electrospinning process parameters on the diameter, orientation, and distribution of polyacrylonitrile (PAN) nanofiber are analyzed. To improve interlaminar fracture toughness and suppress delamination in the form of laminated non-woven fibers by using a heat roller, the performances of filter efficiency and pressure drop achieved with PAN nanofiber air filter are evaluated experimentally.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.579-598
• /
• 2019

We investigated geochemical contaminants and Fe, Al behavior in precipitates of acid mine drainage (AMD) from the Donghae abandoned coal mine, Taebaek, Gangwon Province using aqueous chemical analyses, XRD, IR, and ²⁷Al NMR, Our results showed that water chemistry changed with pH and Eh, and saturation indices of chemical species in the AMD. According to saturation calculated by visual MINTEQ, the AMD was saturated with various Fe-, Al-oxyhydroxide minerals. Reddish brown precipitates are composed of schwertmannite, ferrihydrite, and goethite, whereas whitish precipitates are composed mostly of alumimous minerals such as poorly crystallized basaluminite with trace Al₁₃-Tridecamer. It is important to apply active treatment methods rather than simple storage pond and to control the precipitation and solubility of iron species and aluminous species for ensuring remediation and control for the AMD discharged from the Donghae abandoned coal mine.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.314-319
• /
• 2005

Four kinds of new aliphatic diols were synthesized by the ring opening reaction of glycolide with 1,4-butanediol, 1,6-hexanediol, 1,4-cyclohexanediol, or 1,4-cyclohexanedimethanol, a difunctional initiator, in the presence of stannous octoate catalyst. The resulting diols were melt-polymerized with succinic acid, adipic acid, or suberic acid at 170, 190, or $220^{circ}C$ to produce new sequentially ordered aliphatic polyesters and their corresponding polyesters with random structure. Their glass transition temperatures ($T_g$) ranged from -40 to $30^{circ}C$, The sequentially ordered polyesters prepared at $170^{cir}C$ had higher $T_g$ of 5 to $10^{circ}$ than the polyesters with rand()m structure produced at higher temperature. From in-vitro degradation test the sequentially ordered polyesters was shower in the rate of hydrolysis in a buffer solution than the polymers with random molecular structure.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.253-259
• /
• 2005

Polyurethanes, synthesized by polyester polyols and aliphatic or aromatic diisocyanates for a crease resist finishing agent, were prepared by two-step reactions, that is, prepolymer synthesis and chain extension. The structures of synthesized polyurethanes were confirmed by the measurement of FT-IR and $^1H$-NMR spectrometer. The number average molecular weight ($\bar{M}_n$) and the weight average molecular weight ($\bar{M}_w$) of the polyurethane with aromatic diisocyanate (MDI) were higher than those of the synthesized polyurethanes with aliphatic diisocyanate (HDI, $H_{12}MDI$). The glass transition temperatures ($T_g$) of soft segments in polyurethanes with MDI, HDI, $H_{12}MDI$ were -25,-42 and -50$^{circ}C$, respectively. In the polyurethanes obtained by two-step reaction, thermal stability and tensile strength increased with increasing hard segment contents, whereas elongation at break decreased with increasing hard segment contents.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.410-414
• /
• 2002

The late transition Pd catalyst of low oxophilicity that has ferrocene -based diimine ligand for stabilization of center metal had been synthesized and applied for the polymerization of methyl methacrylate (MMA). In the presence of triisobutylaluminium (TIBA) for impurity scavenger, the effects of polymerization temperature and [TIBA]/[Pd] mole ratio on the yield and glass transition temperature ($T_g$) of PMMA had been examined. For 40~$50^{\circ}C$ of polymerization temperature and 2000~3000 of [TIBA]/[Pd] mole ratio, higher polymer yields were obtained. It was observed that ($T_g$) of PMMA is almost independent to the polymerization temperature but influenced by the [TIBA]/[Pd] mole ratio. With the examination of($T_g$) of PMMA with the structure of polymer, it had been found that T$_{g}$ of PMMA exhibits a linear relationship with the isotacticity of polymer.r.

• Polymer(Korea)
• /
• v.34 no.6
• /
• pp.588-593
• /
• 2010

New seven acrylic monomers with covalently bonded silicon, germanium, and tin were prepared for high refractive index materials. The monomers were copolymerized with a cross-linkable comonomer (Trimer) to prepare UV-films for optical characterization. The refractive index of the copolymers increased in proportion to the monomer content and extrapolated to determine that of homopolymer. $Ph_3Si$, $Ph_3Ge$, and $Ph_3Sn$ groups contributed to increase the refractive index of acrylic polymer, in which $Ph_3Sn$ was more effective than $Ph_3Ge$. The index increment confidently occurred with $Bu_3Sn$ attachment in comparison with aliphatic acrylic polymers. $Ph_3SnS$-attached acrylate polymer showed a refractive index of 1.671 at 589 nm. The index change was similarly observed at various different wavelengths (656, 830, 1310, and 1550 nm).