• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.302-308
• /
• 1997

${\beta}-Cyclodextrin\;({\beta}-CD)$ polymers were prepared using epichlorohydrin as a cross linking agent. The polymers were separated into ${\beta}-CD$ soluble polymer $({\beta}-CD\;SP)$ and ${\beta}-CD$ insoluble polymer $({\beta}-CD\;ISP)$ on a 10,000 molecular weight cut-off membrane (YM 10). Optimum separation conditions in the YM 10 were: transmembrane pressure 51.7 kPa, separation temperature $35^{\circ}C$, and volume concentration ratio 10. The flux was $0.025\;mL/cm^{2}/min$ under the optimum conditions. Gel permeation chromatography indicated that ${\beta}-CD\;SP\;and\;{\beta}-CD\;ISP$ had a degree of polymerization of $2{\sim}8$ and over 10, respectively. The formation of an inclusion complex with hydrophobic compounds such as 4-dimethylaminoazobenzene, methyl red, and naringin was compared among ${\beta}-CD,\;{\beta}-CD\;SP\;and\;{\beta}-CD\;ISP$. The molar absorptivity for the two chromatic compounds was increased and the absorption peak was shifted in the presence of ${\beta}-CD$ polymers. Naringin, the principal flavonoid bitter tasting component of citrus fruit, had a low water solubility. The solubility of naringin was increased through the formation of an inclusion complex with ${\beta}-CD$ polymers. There was no significant difference in the formation of an inclusion complex between ${\beta}-CD\;SP\;and\;{\beta}-CD\;ISP$. Reduction of the bitter components from citrus products was shown to be possible when employing ${\beta}-CD\;SP$, while the usage of ${\beta}-CD$ monomer has been limited due to the low water solubility.

• Asian Journal of Turfgrass Science
• /
• v.25 no.1
• /
• pp.59-68
• /
• 2011

Research was initiated to investigate the effect of high water-absorbing polymer on turf grass quality of three major turfgrasses. A total of 12 treatment combinations were used in the study. Treatments were made with different rates of sand, soil organic amendment (SOA), and water-swelling polymer (WSP). Visual turf grass quality was evaluated in creeping bentgrass (Agrostis palustris Huds., CB), Kentucky bluegrass (Poa pratensis L., KB), and zoysiagrass (Zoysia japonica Steud., Zoy) grown under greenhouse conditions. Significant differences were observed among the treatments in CB, KB, and Zoy. Visual quality ratings varied with mixing rates of SOA and WSP, being maximum 5.6 in differences among them. At the end of study it ranged from 0.3 to 9.6 in CB, 0.3 to 4.0 in KB, and 0.9 to 5.8 in Zoy. Turfgrass quality pattern changed with time after seeding among treatments influenced by WSP rates. From this study, a proper rate of WSP is considered to be 5%, 5~10%, and 5% for CB, KB and Zoy, respectively. In general, overall treatment effect of WSP on turfgrass quality was highly associated with SOA 20% in three turtgrass species. When mixing sand with SOA and WSP for rootzone soil, a proper rate of SOA is considered to be 15 to 20% for CB and KB, while 20% for Zoy of warm-season grass. A further study would be required to investigate the effect of varied, gradual mixing rates of WSP on growth characteristics of turfgrasses grown on mixtures of sand, SOA, and WSP before a field application.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.445-451
• /
• 2015

Semi-flexible liquid crystalline polymers containing a mesogenic group and an octamethylene flexible spacer in the main chain were synthesized by solution polycondensation. The mesogenic group in the polymer consists of four aromatic rings connected by ester and ketone, ether, sulfide, methylene, sulfone, or isopropylidene linkage groups. This paper discusses effects of the central linker of the mesogenic group on polymer properties. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), X-ray diffractometer (XRD), and polarizing optical microscope (POM). Polymers having bent linkage groups exhibited low thermal transition temperatures, narrow mesophase temperature ranges, low liquid crystallinity, and good solubilities in organic solvents, while those having bulky linkage groups were amorphous and exhibited high glass transition temperatures.

• Polymer(Korea)
• /
• v.35 no.6
• /
• pp.531-536
• /
• 2011

Homopolymer distribution in block copolymer/homopolymer blends was investigated as a function of homopolymer concentration and homopolymer molecular weight. The deuterated poly(methyl methacrylate) or polystyrene was blended with a deuterated polystyrene-poly(methyl methacrylate) diblock copolymer up to a concentration of 20 wt%. Samples were characterized by small-angle X-ray scattering (SAXS), neutron reflectivity and transmission electron microscopy. The block copolymer with a thin-film geometry formed alternating lamellar microdomains oriented parallel to the substrate surface. By adding the homopolymer, the microdomain structure was significantly disturbed. As a consequence, a poorly ordered morphology appeared when the homopolymer concentration exceeded 15 wt%. Increasing the homopolymer concentration and/or the homopolymer molecular weight caused the microdomains to swell less uniformly, resulting in segregation of the homopolymer toward the middle of the microdomains.

• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.280-287
• /
• 1992

Aromatic liquid crystalline polyesters were synthesized from terephthalic acid(TPA), biphenyl dicarboxylic acid(BPA) and hydroquinone(HQ) by solution polymerization. Effects of TPA/BPA ratio(by mole %) on the thermal properties, thermal stability and textures of mesophases were investigated with DSC, TGA, cross-polarized microscopy and X-ray diffractometer. The synthesized polymers in this study were thermotropic and showed nematic textures. Melting temperature($T_m$) and isotropization temperature($T_i$) of polymer increased and thermal stabilities of polymer were improved with the content of BPA. Most of the polymers in this study had crystallinity more than 30%.

• Journal of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.259-265
• /
• 1980

Poly (styrene-b-methyl methacrylate) (PS-b-PMMA) was synthesized by free radical telomerization: the telomerization of styrene with $CCI_4$ by using AIBN as initiator followed by a second telomerization of methyl methacrylate using $CCI_3$ end group of the resulting polymer as the macrotelogen, with AIBN initiation, gave the styrene-methyl methacrylate block copolymer. The effects of the concentration of the macrotelogen, the concentration of monomer, the molecular weight of the macrotelogen, the reaction temperature and the concentration of the solvent on the formation of the block copolymer were investigated. Block copolymers containing up to 10 weight percent PMMA were obtained by adjusting the reaction conditions.

• Journal of the Korean Chemical Society
• /
• v.38 no.6
• /
• pp.427-434
• /
• 1994

The retention behaviors of poly(ethylene-co-vinyl acetate)s have been studied by thermal field-flow fractionation(ThFFF) with respect to effective separation and characterization of thermal diffusion coefficients($D_{\tau}$) as one of the physicochemical properties of polymers. The eight copolymers are different in vinyl acetate composition ranging from 25% to 70% and in molecular weight ranging from 110,000 to 285,000. The carrier solvents are THF, toluene and chlorobenzene which have different viscosities and thermal conductivities. It is shown that the retention of a copolymer is dependent on the type of the carrier, the molecular weight and chemical composition of the copolymer. The results show that the retention of a copolymer increases when either vinyl acetate composition or the molecular weight increase. $D_{\tau}$ values measured by experiments vary from 1.36∼5.97 $\cm^2/(s.K)$ depending on the copolymer composition and the type of the carrier solvent. These values increase $(r^2{\geq}0.928)$ with increase of weight % of vinyl acetate. THF is found to be the proper carrier solvent for separation of copolymers employed in this study due to the fact that a $D_{\tau}$ value greatly changes with variation of copolymer composition. From the above results, ThFFF can be used for separation of copolymers with similar molecular sizes but different compositions.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.87-94
• /
• 1992

The elution behavior of polystyrenes(PS), polymethylmethacrylates (PMMA), polybutadienes(PB), PS-PMMA(SM) block copolymers and PS-PB star shaped copolymers on the cross-linked polystyrene gels was studied. An interpretation was proposed for the plots of log hydrodynamic volume versus retention volume of solutes in the mobile phases such as tetrahydrofuran, toluene, chloroform, methylene chloride and tetrahydrofuran-cyclohexane mixture. In order to predict the retention of solutes from their physical properties, multiple stepwise regression analysis was applied to obtain the correlation. The distribution coefficients($K_p$) of solute-gel interactions in GPC for homopolymers and PS copolymers were also obtained in terms of network-limited separation mechanism. In the cases of PS and PB, $K_p$ values approach unity, while $K_p$ values for PMMA decrease as MW increase in the good solvent, but in poor solvent, $K_p$ values increase as MW increase. $K_p$ values of PS copolymers are dependent on their MW and composition, therefore, morohology of SM block copolymer is predicted to be random phase. A single universal plot of log[η]M vs. $(V_r-V_o)/K_p$

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.532-538
• /
• 2012

Failure mechanisms for a highly filled elastomer were discussed, and the stip-yield and the inherent flaw models were applied to them. Then, failure assessment diagram methods were investigated by means of modified two models. Fracture toughness tests using CCT(center-cracked tension) specimens made of a highly filled elastomer were conducted to generate the failure assessment diagrams. The failure assessment diagram of the inherent flaw model was normalized in order to compare with that of the modified strip-yield model. From the comparison of two failure assessment diagrams, it was found that the failure assessment diagram of the modified inherent flaw model more conservatively assesses the failure than that of the modified strip-yield model.

• Journal of Life Science
• /
• v.13 no.2
• /
• pp.214-222
• /
• 2003

The microorganism isolated from soil was identified as Bacillus coagulans by morphological and biochemical analyses and API-50CH/B kit, which was an identification kit for Bacillus species, and named as B. coagulans DL-1. It produced an extracellular biopolymer. Maximum production of biopolymer was 5.00 $\pm$0.15 g/$\ell$ in a $7\ell$bioreactor with an aeration rate of 1.0 vvm and an agitation speed of 500 rpm when concentrations of glucose and yeast as the optimal carbon and nitrogen sources were 2.0% (w/v) and 0.25% (w/v), which were optimized with a flask scale. Gas chromatographic analysis showed that the biopolymer producded by B. coagulans DL-1 consisted of glucose and rhanmose and their molar ratios was about 9 : 1. Its average molecular weight was 2.80$\times$$10^5$ with gel permeation chromatographic (GPC) analysis.