• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1341-1348
• /
• 2018

In this study, we propose a method for applying the image content to the exhibition space using projection mapping techniques. In a typical exhibition space, the artist exhibits works and displays them unilaterally and by using walls defined as screens. However, the new form of exhibition is not one-sided and changes in the way space is free from constraint. The purpose of the exhibition space is to use walls or various installations, which are elements of the exhibition space, as a key part of the exhibition rather than as a material for the spatial compartment. This type of display is a display element of space and you can enjoy the fun and excitement of the exhibition about the new environment. Various imaging techniques are required to construct an exhibition of images and spaces, among which edge blocking is not formed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.2 no.1
• /
• pp.1-10
• /
• 1998

In the dynamic soil-structure interaction(SSI) analysis, numerous uncertain parameters are involved. They include the uncertainties in the definition of input motions, modeling of soil-structure interaction systems. analysis techniques, etc. This paper presents the results of parametric studies of the seismic responses of a reactor containment structure built on the viscoelastic layered soil. Among the numerous parameter, this study concentrates on the effects of definition point of the input motion, embedment of structure to the base soil, thickness of the top soil layer, and rigidity of the base soil. The substructure method using frequency independent impedances is adopted. The method is based on the mode superposition method in time domain using the composite modal damping values of th SSI system computed from the ratio of dissipated energy to the strain energy for each model. From the study results, the sensitivity of each parameter on the earthquake responses has been suggested for the practical application of the substructure method of SSI analysis.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.191-191
• /
• 2015

무분별한 도시화 및 산업화로 인해 불투수면이 증가하고 있다. 불투수면은 빗물이 투과하지 못하는 지면을 의미한다. 이러한 불투수면은 강우 시 지면에 있는 유해물질이 그대로 인근 수계로 유입되게 함으로써 심각한 수질 오염을 야기한다. 이와 관련하여 환경부에서는 불투수율 관리를 위하여 2013년에 전국토를 대상으로 불투수율을 산정한바 있으나, 소축척 수준의 시 또는 유역 단위 통계만을 산출하였고 대축척 수준의 소규모 개인 필지 내 조경지역 등을 반영한 불투수율 통계는 현재까지 부재하다. 따라서 본 연구에서는 인천시 부평구를 대상으로 소규모 필지까지 적용 가능한 고해상도 투수/불투수도를 제작 및 활용하여 용도지역별 불투수율 현황을 분석하였다. 불투수면의 공간적 분포 확인을 위해 토지피복지도, 수치지형도, 항공사진(25cm급) 등을 활용하여 고해상도 투수/불투수도를 제작하였다. 투수/불투수도는 세분류 토지피복지도 제작 지침인 선형 요소의 경우 폭 3m, 면형 요소의 경우 면적 $10m{\times}10m(100m^2)$를 참조하여 제작되어 개별 필지단위의 불투수면까지 확인 가능하다. 이후 용도지역도를 수집하여 GIS 환경에서 투수/불투수도와 중첩하여 용도지역별 불투수율을 산출하였다. 불투수율을 산정한 결과 부평구 전체 불투수율은 64%로 확인되었다. 또한 용도지역도 중분류상 주거지역의 경우 불투수율이 82.1%, 상업지역의 경우 91.7%, 공업지역의 경우 94.1%, 녹지지역의 경우 30%로 확인되었다. 상업지역 및 공업지역의 경우 불투수율이 90%이상으로 불투수면 관리가 시급하다고 판단되었다. 본 연구 결과는 기존 환경부에서 제작한 투수/불투수도 보다 정확한 불투수면의 공간적 분포 확인 및 불투수 면적 산출이 가능하여 불투수면 우선관리지역 선정을 위한 기초자료로 활용 가능할 것으로 판단된다. 향후 연구에서는 본 연구 결과를 바탕으로 불투수율이 높은 지역을 우선 선별하여 저영향개발(LID, Low Impact Development) 및 그린빗물인프라(GSI, Green Stormwater Infrastructure)의 활용 방안에 관한 연구가 이루어져야한다. 특히, 불투수율이 높은 상업지역 및 공업지역에 대해서는 연구 결과의 적극적인 활용을 통한 개선이 요구된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.78-78
• /
• 2017

강우레이더 관측의 정확도는, 호우의 강도나 형태와 같은 기상학적 조건(변동 오차 요소) 외에도, 관측 지점의 레이더로부터의 거리, 고도, 관측유역의 형태나 크기 등 다양한 관측환경 조건(고정 오차 요소)에 의해서도 달라질 수 있기 때문에, 강우레이더 관측의 오차 성분을 정량화할 필요가 있다. 본 연구에서는 거리와 고도에 의한 오차 특성을 이중편파 변수의 특성을 이용하여 실증적으로 분석하였고, 이를 통해 감쇠의 영향과 산지효과(또는 지형효과)로 인한 오차 규모를 정량적으로 산정 비교하였다. 거리가 멀어짐에 따라 고도도 높아지기 때문에 QPE 불확실도의 거리와 고도에 따른 성분을 구분하는 것은 매우 어려운데, 거리에 대한 불확실도 성분이 매우 작은 R(KDP)를 이용한다면 효과적으로 분리가 가능하다. 이러한 원리를 이용하여, 관측 거리에 따른 오차가 매우 작은 R(KDP)를 기준으로 관측 거리에 따른 오차와 고도에 따른 오차를 분리하여 표준화[Z-score] 하였다. R(Z)의 경우는 관측 고도와 거리에 따른 오차가 중첩되어 나타나나, R(KDP)는 거리에 따른 오차는 거의 나타나지 않으므로 이를 기본 가정으로 하여 R(Z)와 R(KDP) 관계로부터 관측 고도에 따른 오차 성분만 분리하였다. 분리 결과, 관측 거리에 따른 표준 오차의 경우 100km 까지는 대략 10%(0.1) 이하로 나타났으나, 150km 이상에서는 30%(0.3)를 초과하는 것으로 나타났다. 관측 고도에 따른 표준 오차의 경우 2~3번째 고도각 까지는 대략10%(0.1) 이하로 나타났으나, 3번째 고도각 이상에서는 20%(0.2), 4번째 고도각 이상에서는 50%(0.5)를 초과하는 것으로 나타나, 고도에 의한 영향이 거리에 의한 영향보다 민감하게 나타났다. 1번째 고도각에서는, 100km 이내 근거리에서 관측 거리가 가까워질수록 오차가 증가하는 경향을 보이는데, 이는 저고도 빔 간섭(빔 차폐) 등의 영향으로 추정되었다.

• Journal of Korea Port Economic Association
• /
• v.22 no.3
• /
• pp.97-140
• /
• 2006

The purpose of this study is to activate Korea's coastal passenger shipping by improvement of the deterrent factors on the basis of field data collected in order to help stimulate it and enhance its competitiveness. As the representative model of this study, the "P" car-ferry liner was chosen, whereby various deterrent factors were observed in the course of the SWOT analysis and through the questionnaires. The major deterrent factors in summary were inflexible government regulations for additional ship operation, disadvantages of taxes policy, port facility shortages, non-allowing of ship's night operation, complicated and inflexible ship's operation controls by the concerned authorities, unreasonable divisions of steaming areas, and existences of obstacles on the ship's running routes, etc. which considered all are important to activate the liners.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.527-534
• /
• 2018

The segment of the piston type wave board has been expressed as a submerged vertical line segment in the two dimensional wave flume. Either end of vertical line segment representing wave board could be located in fluid domain from free surface to the bottom of the flume. Naturally the segment could be extended from the bottom to the free surface of the flume. It is assumed that the piston motion of the wave board could be defined by the sinusoidal oscillation in horizontal direction. Simplified analytic solution of the submerged segment of wave board has been derived through the first order perturbation method in water of finite depth. The analytic solution has been utilized in expressing the wave generated by the piston type wave board installed on the upper or lower half of the flume. The wave form derived by the analytic solution have been compared with the wave profile obtained through the CFD calculation for the either of the above cases. It is appeared that the wave length and the wave height are coincided each other between analytic solution and CFD calculation. However the wave form obtained by CFD calculations are more closer to real wave form than those from analytic calculation. It is appeared that the linear solutions could be not only superposed by segment but also integrated by finite elements without limitation. Finally it is proven that the wave generated by the oscillation of flap type wave board could be derived by integrating the wave generated by the sinusoidal motion of the finite segment of the piston type wave board.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1060-1066
• /
• 2021

Recently, researches for quantum computers have been carried out in various fields. Quantum computers performs calculations by utilizing various phenomena and characteristics of quantum mechanics such as quantum entanglement and quantum superposition, thus it is a very complex calculation process compared to classical computers used in the past. In order to simulate a quantum computer, many factors and parameters of a quantum computer need to be analyzed, for example, error verification, optimization, and reliability verification. Therefore, it is necessary to visualize circuits that can intuitively simulate the configuration of the quantum computer components. In this paper, we present a novel visualization method for designing complex quantum computer system, and attempt to create a 3D visualization toolkit to deploy large circuits, provide help a new way to design large-scale quantum computing systems that can be built into future computing systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.695-702
• /
• 2006

In GIS-based Spatial Decision-making Support System (SDSS), the Boolean logic by conventional simple overlay method contains two problems. One is losing lots of information in analysis process, the other is unable to reflect of weighting values between evaluated items. Therefore, evaluation system as Analytic Hierarchy Process (AHP) needs to improve these problems effectively. The purpose of this study is to provide the benefit of AHP method and GIS spatial analysis in site analysis for crop cultivation. First, the weighting value of AHP for topography, distribution grade of water, property of soil and slope items are evaluated throughout survey to experts of soil, crop and agricultural management fields. On the basis of these weighting value of AHP by items, site suitability analysis for black raspberry cultivation is performed. To estimate the benefit of AHP method, the current cultivating map of black raspberry is constructed in Ssangchi-myeon district. In comparison with site analysis of Boolean logic, site analysis of AHP method shows more realistic.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.4
• /
• pp.307-312
• /
• 2015

The passenger boarding bridge which provides a safe and comfort passenger pathway between an airplane and airport terminal gate is one of the apron equipment. This study investigates the effect of the lift column layout design on structural strength of the passenger boarding bridge by using finite element method, comparing deflection and stress. The overlapped zone of the tunnel frame A and B occurred at the maximum stress. The results of this research show that the lift column layout design is closely the value of the maximum stress.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.371-376
• /
• 2015

In this study, we use 1:1, 1:2, and 1:4 scale zig-zag shape acoustic metamaterial structure to achieve broad and effective sound blocking at the subwavelength scale. The SPL(Sound Pressure Level) results show that the SPL loss of the scaled metamaterial slab in series is a superposition of individual SPL losses. Also, we show that the metamaterial tailors the material properties to achieve high impedance and high refractive index using effective medium theory. Our results show that broad and effective sound blocking is possible at the subwavelength scale just by scaling acoustic metamaterial.