• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2557-2564
• /
• 2009

In this study, a muffler for the super heavy machinery in the 70 ton class is developed. Developing process relies on experimental and rule of thumb approach. Various muffler internal structures consisting of partition plates, perforated and non-perforated through pipes, and absorbent are tried and compared for the transmission loss performance. Based on the experimental results, the best combination and locations of the internal acoustic components which affects the muffler performance are determined.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.246-248
• /
• 2005

The power plants have a loading dock and unloading device for the diverse kinds of fuel such as the bituminous coal and natural gas imported by the sea from all over the world. To unload the coal in the ship not only in the environment-friendly manner but also in the cost-effective way, the new type of heavy equipment loaded with additional features as well as excavator and the remote controller to maneuver this equipment are developed. This heavy equipment, which can be used to unload the coal in the ship in conjunction with CSU (Continuous Ship Unloader), and the remote controller are endorsed by the related code and laws. With the remote controller, the field workers can operate the unloading equipment at the remote place far from the equipment as well as in the cabin for themselves without tile remote controller.

• Journal of Welding and Joining
• /
• v.10 no.4
• /
• pp.103-106
• /
• 1992

건설기계는 우리나라의 산업발전과 성장해 왔으며, 또한 발전과정에서 기여한 바도 크다. 건설 기계의 수요는 1970년대 초부터 지하철, 고속도로등 사회간접자본 개발이 활발해 짐에 따라 건 설기계에 대한 투자나 내수가 성장하기 시작하여 1980년대 후반 국가 산업규모가 확대됨에 따 라서 크게 신장하여, 1982년 내수규모가 약 2100여대이던 것이 1991년에는 16,000여대로 증가해 왔다. 이 중 대표기종인 굴삭기가 전 건설중장비의 약 76%('91년도 금액비)를 점하고 있고, 또한 건설기계는 건설작업의 성역화에 기여해 왔으며 앞으로도 이 역할은 변함없을 것이다. 최근에는 건설기계의 안전성, 공정의 자동화, 로봇화 등이 크게 요구되고 있다. 건설기계는 구조상 연강 후판(두께10-50mm)이 주류를 이루고 내마모부품이 많다. 구성부는 강판이 사용이나(총 중량의 약 30%)일부 주강과 단조품이 사용되고 있다. 경량화를 위하여 고장력강이 사용되고, 기어나 샤프트 등에는 합금강이나 탄소강이 쓰이고 있다. 생산공정은 자동화, 무인화가 추진되고 있고, 설계는 CAD/CAM화가 보편적으로 활용되고 있다. 용접은 탄산가스 아아크 용접이 대부분이고, 일부 MAG또는 플락스 충전 와이어(FLUX CORED WIRE)를 사용하고 있다. 합금강 등에는 마찰용접이나 전자 비임용접이 활용되기도 한다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.271-276
• /
• 1998

To apply the wear resistant steel plate for heavy duty vehicle, the wear characterisms of various kinds of commercial steel plates were invesigated by dry sand/rubber wheel tester which was tested under scratch abrasion mode. The wear tested pnaterials were boron steels which were manufactured by thereto machanical control process (TMCP) in order to achieve higher hardness. As the result of the test, wear resistance of steel plate increases with the hardness and carbon content. The wear loss of wear resistance steel plate (Hv440) is a half times than tinat of SWS490A (Hv160) steel plate in dry sand-rubber wheel test and the result in field test is similar to this dry sand/rubber wheel test result. Therefore, dry sand/rubber wheel tester can be used to predict the scratch abrasion life of the parts for heavy duty vehicle.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.236-247
• /
• 2009

In Korea, the driving system restriction criteria is strictly applied(gross weight 400kN, axial load 100kN). Especially after the Seoungsu Bridge accident, safety factor has been strictly applied. The Safety factor is applied to the cumulative results for each steps like design, construction, maintenance of the Bridge. Because of it, the bridge is undervalued compared to its capacity. So, this generates loss for both private and military sector(eg. logistical delays, structural damage, etc.). But analyzing data from many existing researches we have confirmed that the military heavy vehicle may pass through the first class bridges. In consequence, this study have focused on determining whether HETS vehicles can pass over the first class bridge, without safety issues, using MIDAS structural analysis program. The results have confirmed that the military heavy vehicle may pass over the bridge.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.954-960
• /
• 2001

Axial fans are widely used in heavy machines due to their ability to produce high cooling of engines. At the same time. the noise generated by these fans causes or serious problems. This work is concerned with the low noise technique of discrete. The prediction model. which allowed the calculation of acoustic pressure at the frequency and it's harmonics, has been developed by Farrasat and the Helmholtz-Kir. The newly developed Helmholtz-Kirchhoff BEM for thin body is used to calculate the sound field of the fan that is located in a engine room. To calculate the unsteady resultant force over blade. Time-Marching Free-Wake Method are used. The fan noise of fan sys unsymmetric engine-room is predicted. In this paper. the discussion is confined to and discrete noise of axial fan and front Part of engine room in heavy equipments.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.388-395
• /
• 2000

Axial fans are widely used in heavy machines due to their ability to produce high flow rate for cooling of engines. At the same time, the noise generated by these fans causes one of the most serious problems. This work is concerned with the low noise technique of discrete frequency noise. The prediction model, which allowed the calculation of acoustic pressure at the blade passing frequency and it's harmonics, has been developed by Farrasat. This theory is founded upon the acoustic radiation of unsteady forces acting on blade. To calculate the unsteady resultant force over the fan blade. Time-Marching Free-Wake Method are used. The ideas of low noise technique are obtained from Blade-Momentum Methods. In this paper, the discussion is confined to the performance and discrete noise of axial fan in heavy equipments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.266.1-266.1
• /
• 2014

반도체 및 디스플레이 등의 산업 중 증착공정에서 TCO 등 산화막의(oxide thin film) 중요성은 날로 대두되고 있다. 특히 정밀한 막질을 원하는 공정에서 산소(Oxygen)유량의 차이로 인한 생성된 막질의 변화가 크다. 이로 인하여 여러 연구실에서 다양한 연구가 활발하게 진행중에 있다. 특히 최근 IGZO (In-Ga-ZnO)가 이슈가 되면서 더 다양하게 연구가 진행중이다. 그러나 공정 장비의 노화나 증착공정중장비(Chamber)내부의 미세한 변화가 많아 산소와 공정 기체의 비가 틀어지는 경우가 있고 이를 제어하기는 쉽지 않은 실정이다. 본 연구에서는 먼저 ITO (Indium Tin Oxide)타겟을 통해 스퍼터장비에서 일반적인 공정을 진행한 박막과, 제작된 유량 제어 시스템을 통하여 공정을 진행한 박막을 만들었다. 이를 통해 박막의 차이점을 분석하고 증착공정중 발생하는 플라즈마의 분석도 진행하여 공정의 제어가 가능함을 확인하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.516-517
• /
• 2013

Whole body vibration is very important for operators in construction equipment (CE) industry. There is ISO 2631 regulation to protect operators of CE. Recently WBV is one of critical performance parameters of CE to give operators much better comfortable working environment. And there are many kinds of numerically simplified human body model for the motor industry. We applied one human body model in ISO 5982 for the CE development at early stage. And we've checked the validity of this model to consider WBV by the operator comfort point of view.

• 연구논문집
• /
• s.28
• /
• pp.101-110
• /
• 1998

This study discusses the developement of hydraulic rotary actuator design technology for industrial machinery and earthmoving equipment. The lubrication and wear analysis of sliding components of the machinery are very important parameters to strength the design technique. The analysis and wear test are performed for the selected materials of the above mentioned coupled sliding members. The can be used to select the better combinations of sliding components.