• Membrane Journal
• /
• v.33 no.6
• /
• pp.325-343
• /
• 2023

Direct methanol fuel cells (DMFCs) have been attracting attention as energy conversion devices that can directly supply methanol liquid fuel without a fuel reforming process. The commercial polymer electrolyte membranes (PEMs) currently applied to DMFC are perfluorosulfonic acid ionomer-based PEMs, which exhibit high proton conductivity and physicochemical stability during the operation. However, problems such as high methanol permeability and environmental pollutants generated during decomposition require the development of PEMs for DMFCs using novel ionomers. Recently, studies have been reported to develop PEMs using hydrocarbon-based ionomers that exhibit low fuel permeability and high physicochemical stability. This review introduces the following studies on hydrocarbon-based PEMs for DMFC applications: 1) synthesis of grafting copolymers that exhibit distinct hydrophilic/hydrophobic phase-separated structure to improve both proton conductivity and methanol selectivity, 2) introduction of cross-linked structure during PEM fabrication to reduce the methanol permeability and improve dimensional stability, and 3) incorporation of organic/inorganic composites or reinforcing substrates to develop reinforced composite membranes showing improved PEM performances and durability.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.275-283
• /
• 2023

The progressive wear of teeth is a physiologic process of aging, but excessive wear can lead to occlusal disharmony, tooth sensitivity and pulp exposure, decreased masticatory efficiency, and aesthetic problems. It should be treated by evaluating the cause of tooth wear and establishing a stable centric relation with appropriate vertical dimension of occlusion and occlusal plane. The present case report successfully rehabilitated a full-mouth case of a severely worn dentition with the use of digital facebow transfer and virtual articulator.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.113-122
• /
• 2024

The gradual teeth wear with age is a natural phenomenon, but excessive wear beyond physiological levels can lead to vertical dimension loss, occlusal imbalance, temporomandibular joint disorders, and periodontal disease. In such cases, prosthodontic restoration becomes necessary emphasizing the importance of appropriate vertical dimension increase and stable occlusion in central relation (CR). In this case, a 74-year-old patient with clenching and grinding habit had severe teeth wear and after assessing interocclusal distance, wear degree, pronunciation, and facial profile, it was decided to perform full-mouth fixed prosthesis restoration with a 4 mm vertical dimension increase. And the significantly displaced Maximum Intercuspal Position (MICP) caused by parafunctional movements was re-established as a stable mutually protective occlusal relationship at centric relation and after a successful 4 months adaptation to provisional restorations, the final prosthesis was fabricated. During 4months of observation periods, stable occlusion in central relation and mutual protection occlusal relationships were maintained and the patient was satisfied with function and aesthetics, leading to this report.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.83-90
• /
• 2011

Purpose: This study statistically analyzed the difference of the stability of maintaining a respiratory period shown according to position and use of a device to search the tendency and usefulness of a device. Materials and Methods: The study obtained respiratory signals which maintained a respiratory period for 20 minutes each supine and prone position for 11 subjects. The study obtained respiratory signals in a state of using a belly board for 7 patients in a bad condition of a respiratory period in a prone position to analyze a change in respiration and the stability before and after the use of a device. Results: The supine part showed 54.5%, better than the prone part of 36.4% in a case that the stability for maintaining a respiratory period was in a good condition as a fixed respiratory period was well maintained according to the position. 6 patients (85%) showed a maintenance pattern of a respiratory period significantly different before the use and 4 patients showed a significantly good change in the stability for maintaining a respiratory period as a result that belly boards were used for 7 patients that the maintenance of a respiratory period was not in a good condition on a prone position. Conclusion: It seemed that this study could contribute to the maintenance of respiratory period and of respiratory stability as the optimal position for maintenance of respiration and the use of a device such as a belly board were decided through statistic analysis of respiratory signals and its application even if patient position and use of device were decided by the beam arrangement a treatment part of a patient, location of a target, and an expected plan.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.433-445
• /
• 1995

Tooth movement, the phenomena and mechanisms of which are still controversial, can be considered as part of the result of the inflammatory processes. The purpose of this study was to examine the activity of macrophage and T-cell, playing important roles in the immune reaction, in the periodontal ligament of dog, in which experimental tooth movement was performed. Six one and half year-old dogs, a control and 5 experimentals, were studied. Light force (50-75g) was applied by placing open-coil spring between left mandibular premolars ; heavy force (250-300g), between right mandibular premolars. Experimental dogs were sacrificed at 12 hours, 1, 3, 7 and 14 days since force application, respectively. And the histologic and the immunohistochemical evaluation on the obtained tissue were performed, using $\alpha$-1-antichymotrypsin and CD3 antibodies. The results were as follows : 1. There were more inflammatory cell infiltrations in heavy force group than in light force group until 3 days. But from 7 dsays on, no difference was not observed between groups ; Such an infiltration was more evident at pressure side than at tension side. 2. Osteoclastic activity at pressure side began to be seen in 12 hours, increasing until 7 days. After then it decreased ; Such an activity was more evident in heavy force group than in light force group. 3. Tearing of periodontal ligament and vascular dilatation at tension side began to be seen in 12 hours, increasing until 3 days. After then it decreased ; Such an observation was more evident in heavy force group than in light force group, but there was no difference between groups in 14 days. 4. $\alpha$-1-antichymotrypsin expression in control group was positive, mainly in sulcular epithelium, but negative in periodontal membrane, pulp, bone cells. 5. $\alpha$-1-antichymotrypsin expression in experimental group was more positive in pressure side than in tension side ; The expression was a little more positive in cervical area of tooth until 3 days, but after 7days, it was more positive in apical area. 6. $\alpha$-1-antichymotrypsin expression in light force group began to be observed in 12 hours and reached to the greatest level in 7 days, after which it decreased ; In heavy force group, it was the greatest in 3 days, after which it decreased. 3 Expression in the periodontium was almost negative.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.196-203
• /
• 2003

The application of sealants is a highly technique-sensitive procedure, requiring an extremely dry field prior to placement. Moisture contamination of the etched enamel surface before sealant placement is cited as the main reason for sealant failure. The purpose of this study was to evaluate the effects of different methods of sealant application on the shear bond strength of sealants to enamel. In groups 1, 2, 3, 4 Teethmate(unfilled sealant) was used, while Ultraseal XTplus(filled sealant) was used in groups 5, 6, 7, 8. Groups 1 and 5(control) were acid etched for 15 seconds using 35% phosphoric acid, washed and then dried. In groups 2, 6 drying agents were applied, and in groups 3, 7 bonding agents were applied and light cured. In groups 4 and 8 both drying agent and bonding agent were applied. Then sealant was cured to the specimen using molds 3mm in diameter and 2mm in height. Thermocycling was performed and shear bond strength was finally measured. The following results were obtained : 1. Groups using filled sealant(groups 5, 6, 7, 8) showed higher shear bond strengths compared to groups using unfilled sealant(groups 1, 2, 3, 4). 2. Among groups using unfilled sealant(groups 1, 2, 3, 4), groups 2, 3, 4 showed significantly higher shear bond strength compared to group 1(p<0.05). There were no significant differences among groups 2, 3 and 4. 3. There were no significant differences(p>0.05) among groups using filled sealant(groups 5, 6, 7, 8). 4. When modes of fracture were examined, cohesive failure was observed in groups 2, 3 and 4.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1993.05a
• /
• pp.97-97
• /
• 1993

Primary tumor arises infrequently in the parotid gland and generally, only about 20 to 40 percent of which prove to be malignant. They are characterized by histopathologic diversity, slow tumor growth, significant proportion of patients who have received previous treatment elsewhere. We have reviewed retrospectively 101 cases of parotid gland tumors which were treated for the recent eight years (1985-1992), Non-neoplastic tumor-like lesions were all excluded.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.239-249
• /
• 2001

The purpose of this study is to evaluate the relationship of the factors which could be influenced by orthognathic surgery especillay SSRO. We measured the amounts of the maximum opening, lateral movements, maximum velocity and pattern of mandibular path during the opening and closing of mandible at the following times ; preoperative, 1 month after operation, 6 months after operation respectively using MKG. And the results were compared according to the categorized subgroups. Following results were obtained : 1. The change of the amounts of mandibular lateral movement and maximum opening velocity were statistically different between male and female (p<0.05), but the others were not. 2. According to the method of operation, there was no difference in the change of the mandibular movements between the group of SSRO and SSRO plus LeFort I osteotomy (p>0.05). 3. According to the amounts of mandibular movement, the recovery of left lateral movement of the group of $6{\sim}10mm$ was better than the other groups (p<0.05). 4. In the frontal pattern of the opening and closing of the mandible, the complex deflected type (F5), simple deflected type (F4), complex deviated type (F3), simple deviated type (F2), straight type (F1) were obtained in order at the time of preoperative, simple deflected type, simple deviated type, complex deviated type, straight type, complex deflected type in order at the time of 1 month after surgery, and the result at the time of 6 months after surgery was the same with that of the time of preoperative. In the sagittal pattern, non-coincident type (S2) was predominant at the time of preoperative, and coincident type (S1) was predominant at the time of 1 month after surgery. After 6 months, the result was also the same with that of the preoperative in sagittal pattern. 5. There was not a statistical difference in the change of the mandibular movement between group of presence of the preoperative TMJ symptoms and non-presence group (p>0.05). 6. There was not a statistical difference in the change of the mandibular movement between repositioning device applied group and non-applied group (p>0.05). 7. Sixty three percents of the patients who had preoperative TMJ symptoms were improved after surgery and preoperative TMJ symptoms were more improved after operation in the repositioning device non-applied group statistically (p<0.05).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.378-385
• /
• 2006

To release fashion trends in an efficient way, many of the apparel business and fashion educational institutes in land adopt fashion shows employing fashion models. Modeling rather than flat pattern making realizes the majority of the complicated design works for the fashion shows. However, for the different measurements between the dress form and the real human model, problems often occur during the modeling and fitting processes. Researches on the standard dress form development representing professional fashion models' features are therefore in urgent need to enable the related apparel business and fashion institutes to make appropriate use of the dress form in their jobs. The study has been conducted as a preliminary study using a questionnaire method ultimately to develop the female dress form. A questionnaire in the research aimed at an investigation into the actual conditions of and satisfaction with the usage and the body measurements of existed dress forms. Approximately 30 fashion-related educational institutes and 10 apparel companies responded to the survey. Data derived from the survey was analyzed using SPSS version 10.1, the statistics tool. The results throughout the research were discussed in terms of largely three categories that are; (1) the general conditions of the usage of the dress form to prepare fashion shows: e.g. the frequency of holding the fashion show in an annual term, the proportion of professional and amateur models employed for the fashion show, the methods to construct garments, types and number of dress forms utilized and etc.; (2) factors considered to purchase the dress form e.g. its functionality, shapes, sizes, duration, price, A/S condition and etc.; and(3) satisfaction with the similarity between the dress form and the human body in the relation to the body measurements. Measurements in length wise, front and back waist lengths, neck to bust point on the dress forms were apparently differed from the ones of the actual body. In particular, differed torso length measurements cause the problem to have to alter the whole silhouette, consequently, the resultant patterns as well. In girth measurements, in order of bust and waist girths, the satisfaction was low.

• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.71-81
• /
• 2004

In this study, we attempt to investigate the mechanisms by which PDL cells regulate osteoclast formation and also tc know whether PDL retained their characteristic phenotype during tooth eruption and interdental separation. Rats were prepared at developmental days 21 (pre-root formation), 27(toot development), 34(advanced root formation/eruption) and at later times(adult rats). To induce severe resorption state of alveolar bone and tooth root, interdental separation with brass wire was performed between the lower first and second molars for 2 weeks in adult rats. Rat mandibles were demineralized and embedded in paraffin, and horizontal and frontal section were prepared for immuno-histochemical analysis using PDL-specific protein 22 (PDLs22), receptor activator of NFKB ligand (RANKL) and osteoprotegerin (OPG) antibodies. 1. Root formation and eruption stage of tooth development. 1) PDLs22 immunolocalization was observed in tooth follicle/PDL cells and osteoblasts throught out the root formation and eruption stages of tooth development. 2) RANKL expression became stronger at eruption stage than root formation stage of tooth development. 3) Strong expression of OPG was detected in follice/PDL cells of toot formation stage but it was decreased with tooth eruption. 2. Interdental separation between lower first and second molar 1) Comparared to normal animal, multinucleated osteoclasts and odontoclasts were markedly induced in the alveolar bone and tooth root with PDL remodeling in hematoxylin-eosin section. 2) PDLs22 expression was decreased with interdental separation. 3) RANKL expression was Increased with interdental separation in PDL fibroblasts, osteoblasts, odontoclasts and it lacunae, resorting dentin, cementum and bone matrix. 4) OPG expression was slightly decreased in the PDL cells adjacent to the alveolar bone and root surface with interdental separation. These results suggested that during tooth eruption and tooth movement, RANKL and OPG in the periodontal tissues are important determinants regulating balanced alveolar bone and tooth root resorption. And it is also suggested that PDL cells retained their characteristic phenotype during tooth eruption and interdental separation except for the short period of PDL remodeling.