• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.265-265
• /
• 2016

호우가 홍수에 미치는 영향의 분석은 수문현상을 이해하고 수공구조물을 설계하는데 반드시 필요한 절차이다. 호우가 홍수에 미치는 영향을 분석하기 위해서 독립된 소유역부터 비독립된 대유역까지 홍수량을 계산하고 그 상관성을 이해해야 하지만 상류쪽의 소유역의 경우 관측자료의 부재가 빈번하여 이러한 전반적인 분석이 쉽지 않다. 그리고 소유역과 대유역의 홍수특성을 연관지어 분석하기 위해서는 비교가능한 홍수특성을 추출해야 하며 이러한 일관된 잣대를 사용한 홍수분석은 중요하다. 본 연구에서는 소유역의 자료부재를 보완하기 위해 자료공간확장 방법을 제안하고 이를 통하여 안동댐 유역내 총 50개 지점의 홍수 시계열자료를 생성하였다. 자료공간확장 방법으로써, 안동댐유역의 1989년부터 2009년까지의 자료의 질이 좋은 20개의 사상을 추출하였고 안동댐유역 내에 위치한 안동댐, 도산, 소천의 수위관측지점의 관측유량자료에 대해 분포형 모형인 GRM 모형의 매개변수를 시행착오법으로 동시에 보정하여 한 개셋의 최적 매개변수를 추정하였다. 이때 모의결과를 평가하기 위하여 Nash-Sutcliffe (NS) 계수를 사용하였으며 20갯 사상의 세군데 관측수위지점에 대해서 모의결과가 전반적으로 0.5 NS 계수 이상으로써 만족할 만한 결과를 얻었다. 이 추정된 매개변수는 47개의 추가적인 관심지점의 유출모의에 사용되었으며 이렇게 모의된 유출시계열 자료는 관측시계열 자료로 가정하여 사용하였다. 이렇게 공간확장되어 생성된 시계열 자료는 이동평균방법을 사용하여 홍수강도-지속시간 곡선으로 변환되었고 50개 유역의 평균강우량 시계열 자료 또한 같은 밥법을 사용하여 강우강도-지속시간 곡선으로 변환되었다. 50개 유역의 비교가능한 일관된 홍수특성을 추출하기 위해 비유량법의 유출계수를 계산하였다. 유출계수를 계산하기 위해 유역별 도달시간을 계산하였으며 이 도달시간에 해당하는 강우강도를 추출하였다. 그리고 유역별 첨두 홍수강도를 유역별 도달시간에 해당하는 강우강도로 나눠줌으로써 유역별 유출계수를 계산하였고 이 유출계수를 유역면적에 대해 도시함으로써 그 경향을 조사하였다. 조사 결과 유역면적이 $100km^2$ 이상으로써 상류에서 하류방향으로 유역이 중첩되면서 증가하는 비독립적인 유역들의 경우 유역면적이 증가함에 따라 유출계수가 작아지거나 커지는 어떠한 경향을 보였다. 하지만 유역면적이 $100km^2$ 이하로써 독립적인 소유역의 경우 유역면적이 증가함에 따라 유출계수는 무작위로 분포되었다. 이것은 비독립적인 유역의 경우에는 호우가 홍수에 어떠한 일관된 영향을 미치나 각각 독립된 소유역의 경우에는 일관된 영향을 미치지 않음으로써 지역화방법에 의한 독립된 인근 미계측유역의 유출추정은 그 신뢰성이 높지 않다는 것을 의미한다.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.9-14
• /
• 2013

The e-navigation has been being developed in IMO is a sort of strategy to provide user-oriented services for safe navigation and environmental protection based on the architecture and its related services complying with the user needs. At NAV $57^{th}$ meeting in 2011, the overarching e-navigation architecture was approved which represent overall relationship only between onboard and ashore elements, so more detail technical architecture for each element should be developed for implementation in view of services and systems. Considering the continuous and iterative verification of e-navigation development process required by IMO, the relationship and traceability should be took in consideration between the outcome of e-navigation process and the element of the architecture. In this paper, we have surveyed literarily the user needs, result of gap analysis and practical solutions to address them and defined the architecture elements and their relationship considering the three kinds of views of DoDAF(Architecture Framework) of US department of Defence, in result, proposed the e-navigation shipboard technical architecture.

• Communications for Statistical Applications and Methods
• /
• v.18 no.3
• /
• pp.377-389
• /
• 2011

A higher quality level is generally perceived by customers as improved performance by assigning a correspondingly higher satisfaction score. The third generation index $C_{pmk}$ is more powerful than two useful indices $C_p$ and $C_{pk}$ that have been widely used in six sigma industries to assess process performance. In actual manufacturing industries, process capability analysis often entails characterizing or assessing processes or products based on more than one engineering specification or quality characteristic. Since these characteristics are related, it is a risky undertaking to represent the variation of even a univariate characteristic by a single index. Therefore, the desirability of using vector-valued process capability index(PCI) arises quite naturally. In this paper, we consider more powerful vector-valued process capability index $C_{pmk}$ = ($C_{pmkx}$, $C_{pmky}$)$^t$ that consider the univariate process capability index $C_{pmk}$. First, we examine the process capability index $C_{pmk}$ and plug-in estimator $\hat{C}_{pmk}$. In addition, we derive its asymptotic distribution and variance-covariance matrix $V_{pmk}$ for the vector valued process capability index $C_{pmk}$. Under the assumption of bivariate normal distribution, we study asymptotic confidence regions of our vector-valued process capability index $C_{pmk}$ = ($C_{pmkx}$, $C_{pmky}$)$^t$.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.497-508
• /
• 2021

After the spread of COVID-19, the OTT market has grown rapidly. Accordingly, competition of OTT platforms has intensified. Among them, TVing provides users distinct characteristics of service, such as media and commerce, to differentiate it from other platforms. It is important to offer appropriate usability when proving combined service in one mobile application. Otherwise, it can adversely affect the user experience. In this regard, this research conducted usability testing of TVing and found out what user experience should be considered when integrating different characteristics of service in one mobile application. Through the usability testing, we measured and analyzed effectiveness, efficiency, and satisfaction based on the ISO usability testing guidelines. As a result, three important considerations of UX design for mobile application of combined services were found; 1) connectivity between services, 2) easy navigation, 3) consistent UI design, and 4) relations between subjects and provided information. This design consideration is expected to be applicable not only to TVing mobile application, but also to the situation where composed services are provided in one application.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.631-636
• /
• 2022

Alcohol content, which is an important standard for Takju, a traditional multiple parallel fermentation liquor called makgeolli, is a factor that can affect the flavor. For alcohol content analysis, the distillation/hydrometry technique is mainly used. In this study, we analyzed the alcohol content of 14 commercially available Takju by the distillation/hydrometry technique and the improved GC method, respectively, after verifying the reliability of improved GC method. The precision and accuracy of the GC method were satisfactory, and LOQ and LOD were evaluated as 0.5% and 0.1% of ethanol contents, respectively. Among the three Takju exceeding the labelled alcohol content ±1, one Takju was quantitated as alcohol content 9.9% (by GC method) and 10.1% (distillation/hydrometry technique) exceeding labelled 6.0%. It was within the analytical error range of alcohol content for other two Takju, where the alcohol contents were exceeded -1.1%. The average precision (%RSD) of 14 Takju analyzed by the distillation/hydrometry technique (36.2%) and the GC method (12.8%), confirming that the GC method was better than the other. The improved GC method was evaluated to be effective in managing and improving the alcohol content standard of Takju with the wide range of alcohol content.

• The KIPS Transactions:PartD
• /
• v.12D no.4 s.100
• /
• pp.589-600
• /
• 2005

Application developers need effective reuseable methodology to meet rapidly changes and variety of users requirements. Product Line and CBD(Component Based Development) offer the great benefits on quality and productivity for developing the software that is mainly associate with reusable architectures and components in a specific domain and rapidly changing environments. Product line can dynamically focus on the commonality and variety feature model among the products. The product line uses the feature modeling for discovering, analyzing, and mediating interactions between products. Reusable architectures include many variety plans and mechanisms. In case of those architecture are use in product version for a long time, It is very important in architecture product line context for product line design phase. Application developer need to identify the proper location of architecture changing for variety expression. It is lack of specific variety managements to design the product line architecture until nowdays. In this paper, we define various variety types to identify the proper location of architecture changing for variety expression and to design the reusable architecture. We also propose architecture variety on feature model and describe variety expression on component relations. We implemented the web learning system based on the methodology. We finally describe how these methodology may assist in increasing the efficiency, reusability, productivity and quality to develop an application. In the future, we are going to apply the methodology into various domain and suggest international and domestic's standardization.

• Journal of Nutrition and Health
• /
• v.33 no.1
• /
• pp.86-101
• /
• 2000

Various kinds of living circumstances are making population structure of Korean changed. That is, number of the children is decreased and that of the aged is increased. It is predicted that population of the children and the aged will be almost same until 2020. With above, as the expectation of the aged on healthy living might be increased, some special programs for the aged will be needed strongly. At this point, Korean aged population might be economically poor, comparing with other generation. In general, economic factor affects the subjective living-satisfaction and health status of them. Moreover, educational status, household shape and family tieing also affect their health status. According to the foreign articles, health status of the aged might be related to income, educational status, job, employed or/not, marital status, family structure, sex, and childhood condition. decrease of the income or unemployment could make the death rate of the aged higher. During childhood, discordance among the family might affect their health status after. IGUR is also important factor to affect the adulthood health. Positive life style of the aged would lessen their unequality of the health among them. Nutritional status of the Korean aged population might be indicated under the nutritional recommendation. It is affected by their income, education level, social class, and residing place. (Korean J Nutrition 33(1) : 86-101, 2000)

• Journal of Korean Home Economics Education Association
• /
• v.26 no.1
• /
• pp.1-16
• /
• 2014

The purpose of this research is to develop a theme-based integrated teaching/learning plan in clothing, food, and housing in home economics and to apply the developed process in classes for evaluation in order to identify the suitability in schools. The theme-based integrated teaching/learning plan developed on the basis of textbooks consist four sub-themes; choosing($1^{st}$ and $2^{nd)$ lessons), using($3^{rd}$ lesson), processing ($4^{th}$ lesson), and alternatives($5^{th}$ and $6^{th}$ lessons) under the main theme of 'green family life'. The results from 20 individual and group activities showed that the students actively solved the problems when the presented cases were related to their own lives or experiences. The opportunity to implement green life through activities motivated students' willingness to proceed in real life. However, it is vital to assist integrated thinking through various examples before beginning due to students with difficulties connecting the issue from one area to the other during the problem-focused activity. The students' ability to solve the activity workbook had been improved as the lessons continued. From the survey questions on the theme-based integrated lessons, all items associated with integration of clothing, foods, and housing were positively responded. Also, questions regarding general understanding, suitability and satisfaction on the teaching/learning process were marked positive. The conclusion could be that the integrated theme related to clothing, food, and housing in our life would be appropriate for green family life. The theme-based integrated teaching/learning plan is effective in understanding the occurrence of green family life in relation with clothing, food, and housing, identifying the practical ideas implementing green life in those areas, and improving the integrated ability to solve the green life related problems. However, this research has its weakness in generalizing the results due to its limited survey respondents and post-evaluation being the only assessment conducted.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.113-132
• /
• 1999

Recently in Korea, application of the soil nailing is gradually extended to the sites of excavations and slopes having various ground conditions and field characteristics. Design of the soil nailing is generally carried out in two steps, The First step is to examine the minimum safety factor against a sliding of the reinforced nailed-soil mass based on the limit equilibrium approach, and the second step is to check the maximum displacement expected to occur at facing using the numerical analysis technique. However, design parameters related to the soil nailing system are so various that a reliable design method considering interrelationships between these design parameters is continuously necessary. Additionally, taking into account the anisotropic characteristics of in-situ grounds, disturbances in collecting the soil samples and errors in measurements, a systematic analysis of the field measurement data as well as a rational technique of the optimum design is required to improve with respect to economical efficiency. As a part of these purposes, in the present study, a procedure for the optimum design of a soil nailing excavation wall system is proposed. Focusing on a minimization of the expenses in construction, the optimum design procedure is formulated based on the genetic algorithm. Neural network theory is further adopted in predicting the maximum horizontal displacement at a shotcrete facing. Using the proposed procedure, various effects of relevant design parameters are also analyzed. Finally, an optimized design section is compared with the existing design section at the excavation site being constructed, in order to verify a validity of the proposed procedure.

• Journal of the Korean Geographical Society
• /
• v.47 no.5
• /
• pp.755-774
• /
• 2012

The main objective of the study is to propose GIS-based methods to assess the population distribution criteria for undesirable facilities such as nuclear power plants. First of all, a review of the relevant criteria was conducted for the official documents compiled by such institutions as IAEA (International Atomic Energy Agency), U.S. NRC (Nuclear Regulatory Commission), and some national institutes including the Korea Institute of Nuclear Safety. It is informed from the review that the fundamental principle underlying the various criteria is to maximize the distance between a plant and the nearest population center. It is realized that two interrelated GIS-based techniques need to be devised to put the principle into practice; sophisticated ways of representing population distribution and identifying population centers. A dasymetric areal interpolation is proposed for the former and cell-based and area-based critical density methods are introduced. Grid-based population distributions at various spatial resolutions are created by means of the dasymetric areal interpolation. By applying the critical density methods to the gridded population distribution, some population centers satisfying the population size and density criteria can be identified. These methods were applied to the case of the Gori-1 nuclear power plant and their strengths and limitations were discussed. It was revealed that the assessment results could vary depending upon which method was employed and what values were chosen for various parameters. This study is expected to contribute to foster the applications of methods and techniques developed in geospatial analysis and modeling to the site selection and evaluation.