• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.505-505
• /
• 2012

플라즈마 제트에서 발생하는 전기적 충격을 제거하기위한 특성을 조사하였다. 바이오 플라즈마 연구에 사용되는 대기압 플라즈마 제트는 일반적으로 아르곤 등의 불활성 가스를 주입하고 고전압을 전극에 인가하여 플라즈마를 발생하는 방식이다. 저주파(수십~수백 kHz) 전원 장치로 발생하는 일반적인 플라즈마 제트에서의 전기적 데미지는 전류 값이 2 mA 이상일 때 발생한다. 본 실험에 사용한 장치는 석영관의 양단 끝에서 가스를 주입하여 석영관 중앙에 위치한 홀로 가스가 빠져나가는 구조이다. 석영관 양단 끝에 위치한 전극에 서로 반대 위상의 교류전원을 인가하고, 그로 인해 발생된 플라즈마는 중앙에 위치한 홀로 방출된다. 따라서 홀이 위치한 석영관 중앙의 전압은 수십 V로 측정되었으며, 이로 인한 전기적 충격이 없었다.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.336-338
• /
• 2010

장문인식은 손바닥 중앙부에 나타난 손금과 주름의 패턴을 이용하여 개인을 식별하는 것으로, 효과적인 장문인식을 위해서는 이러한 패턴이 나타나는 관심영역(ROI: region of interest)에 대한 안정적인 추출이 필요하다. 본 논문에서는 윤곽선의 형태 정보를 토대로 적응적으로 굴곡점의 위치를 찾아내고 이로부터 ROI를 추출하는 방법을 제안한다. 제안된 방법의 성능을 확인하기 위하여 유도 막대가 없는 자연스런 장문획득 장치에 의해 수집된 장문영상을 대상으로 실험을 수행하였다. 실험결과 제안된 방법은 손의 위치 변화나 회전에 무관하게 장문영상으로부터 안정적으로 ROI를 추출함을 확인할 수 있었다.

• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.524-533
• /
• 2015

In this paper, results for an installation and operation of a GPS jammer localization system were analyzed. The jammer localization system was developed by Korea Aerospace Research Institute and it consists of 4 Receiver Stations, a Central Tracking Station, and a Monitoring Station. The system was installed at Incheon International Airport in November 2014; each Receiver Stations were installed at rooftop of buildings apart from 4km, and the Central Tracking Station and a Monitoring Station were installed at indoor. Results of the operation can be monitored through web-browser in real-time, Korea Aerospace Research Institute and Incheon International Airport Corporation are continuously monitoring them. So far, there is no jamming signal which affects GPS receivers around the airport, however, some abnormal signals were frequently received at Receiver Stations. Therefore, the characteristics of those signals were also analyzed in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2800-2805
• /
• 2013

In preperation for the compulsory installation of VHF(Very High Frequency) wireless equipment and fishing vessel automatic identification system according to the revision of "The Ships Safety Act" and "Fishing Vessel act", Fishery Information & Communication Department of National Federation of Fisheries Cooperatives is building VHF communication network and automatic identification system for fishing vessel monitoring. This study suggests the protocol analysis for the calling of location requirement using DSC(Digital Selective Calling) function and show best way for fishing vessel automatic identification system. Also, it suggest way to realize fishing vessel monitoring system.

• The Journal of the Korea Contents Association
• /
• v.9 no.8
• /
• pp.84-90
• /
• 2009

In this paper, the RFID-based ad-hoc network is presented for the efficient yard management of the container terminal. The loading and unloading work is performed through the ad-hoc communication between YT and GC, YT and TC within the yard without the control of the central server. That makes the efficient operation of the yard with real task correspondence. Using the location information of the RFID tag, we have proposed the routing protocol which is suitable for the yard environment of the container terminal. The performance evaluation has been carried out through the network simulator and gained an effective results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.929-932
• /
• 2013

In preperation for the compulsory installation of VHF(Very High Frequency) wireless equipment and fishing vessel automatic identification system according to the revision of "The Ships Safety Act" and "Fishing Vessel act", Fishery Information & Communication Department of National Federation of Fisheries Cooperatives is building VHF communication network and automatic identification system for fishing vessel monitoring. This study suggests the protocol analysis for the calling of location requirement using DSC(Digital Selective Calling) function and show best way for fishing vessel automatic identification system. Also, it suggest way to realize fishing vessel monitoring system.

• The Journal of the Korea Contents Association
• /
• v.11 no.1
• /
• pp.65-71
• /
• 2011

In this paper, the RFID / USN-based ad-hoc network structure is presented for efficient operation of a container terminal yard. Communication between fixed or mobile devices in the container terminal yard is accomplished through the ad-hoc node, to collect the status information of a container in real time. Any outside shipper of the container as well as central server allows to share the status information of a container through ad-hoc communication. In addition, to predict the maximum wireless transmission range of nodes by RFID tag position in the yard, LAODV (Location based AODV) routing protocol is proposed. The validity is proved by performance evaluation via computer simulation.

• Journal of KIISE
• /
• v.43 no.3
• /
• pp.389-397
• /
• 2016

In this paper, we propose a highway safety system that comprises a small number of central servers and smart mobile devices. To implement this system, we constructed a central server that collects GPS location information on cars, whose update messages are decreased via the car location estimation algorithm. The in-car mobile devices use the accelerometer sensors to detect hazardous situations; this information is updated to the central server that relays the information to the corresponding endangered cars via location-based unicast using LTE communication. To evaluate the proposed algorithm, we equipped a mobile device app on a real car and conducted real experiments in various environments such as city streets, rural areas, and highway roads. Furthermore, we conducted simulations to evaluate the propagation of danger information. Finally, we conducted simulated experiments to detect car collisions as well as exceptions, such as falling of the mobile device from the cradle.

• Fire Science and Engineering
• /
• v.18 no.2
• /
• pp.41-48
• /
• 2004

We have conducted a numerical simulation under three-dimensional unsteady conditions in order to analyze the characteristics of $CO_2 $;, extinguishant transfer by varying the location of the injection nozzle, which affects the effect of a $CO_2 $;, fire fighting system used in the form of fixed systems for the marine engine room. Flow fields and $CO_2 $;, concentration fields were measured according to the location of the injection nozzle. In the case of arranging the injection nozzle on the center of the ceiling, the low-normal concentration distribution was developed along the $CO_2 $;, jet due to the downward flow created by impinging ceiling jets in the symmetric plane. The concentration line reaches its peak due to the mass transfer of $CO_2 $;, at the comer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.476-476
• /
• 2010

유도 결합 플라즈마 (ICP)는 축전 결합 플라즈마 (CCP) 보다 상대적으로 높은 밀도의 플라즈마를 발생시킬 수 있다. 또한 구조가 간단하고 기존 스퍼터링 장치의 내부에 추가 설치가 용이하며, 스퍼터된 입자의 이온화, 반응성 가스의 활성화를 위한 2차 플라즈마원으로 적용이 가능하다. 그러나 대면적의 고밀도 플라즈마의 균일도 측정은 고가의 2D probe array등을 사용하여야 한다. 본 연구에서는 간단한 CCD camera를 챔버 내부에 삽입하여 가시광 영역의 적분 강도를 이용해서 플라즈마의 2차원적 균일도를 정성적으로 비교 판단하고 시간에 따른 국부적인 이상 방전을 감시할 수 있도록 내장형 무선 카메라를 사용하였다. 직경 380 mm의 챔버 내에 2 turn ICP antenna를 이용하여 유도 결합 플라즈마를 발생시켰다(Ar 30 sccm, 35 mTorr, 2 MHz, 400 W). 내장형 무선 카메라를 챔버 내부 중앙의 ICP antenna에서 8 cm 아래에 위치시켜 플라즈마를 진공 중에서 촬영하였다. 내장형 무선 카메라를 챔버 내부에 위치하여 촬영한 결과 외부에서 view port로 쉽게 확인할 수 없는 ICP antenna 내부의 고밀도 플라즈마의 불균일도를 평가할 수 있었고, ICP antenna 가장자리에서 중심으로 이동할수록 밝아지는 것을 토대로 중심 영역의 plasma 밀도가 가장 높다는 것을 알 수 있었고, 채도와 명도의 차이를 이용하여 시각적인 플라즈마 균일도를 분석하였으며 이를 플라즈마 모델링 기능이 있는 전산 유체 역학 프로그램인 CFD ACE+를 이용하여 플라즈마 분포를 모델링 및 비교하였다. 또한 인라인 타입의 마그네트론 스퍼터링 시스템에서 기판 캐리어에 무선 카메라를 장착하여 이동하면서 캐리어와 마그네트론 방전 공간의 상대적인 위치에 따른 마그네트론 방전링의 형상 변화도 관찰하였다.