• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.143-153
• /
• 2006

The differences in the stress distribution and the critical stresses in concrete pavement systems were analyzed when the dual-wheel single-, tandem-, and tridem-axle loads were applied at the interior and the edge of the pavement. The effects of the concrete elastic modulus, slab thickness, foundation stiffness, and tire contact pressure were investigated. The stresses under the interior loads were calculated using the transformed field domain analysis and stresses under the edge loads were obtained using the finite element method. The critical stresses under the interior and the edge loads were compared with respect to various parameters and the equations to predict the ratio between the stresses under the edge and the interior loads were developed and verified. From this study, it was found that the trends of the changes in the critical concrete stresses under the interior and the edge loads were very similar and the critical stress locations under those loads were identical. The critical stress ratio, which was obtained by dividing the critical stress under the edge loads into that under the interior loads, decreased with increasing the number of axles. That ratio became larger as the concrete elastic modulus increased, the slab thickness increased, the foundation stiffness decreased, and the tire contact pressure increased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.73-79
• /
• 1994

(1) 진공청소기의 소음은 팬모타의 회전에 기인하는 유체소음과 진동소음이 주류를 이루며, 여기에 공기의 흡입과 배출에 따른 유체소음등이 복합되어 나타난다. (2) 진공청소기의 소음특성은 각 소음원들의 특성에 따라 주파수대역을 구분할 수 있으며, 기계적 진동음인 500Hz부근에서 peak를 보인다. (3) 소음의 저감을 위하여는 기존에 정립되어 있는 흡음, 차음, 감쇠, 방진, 유압유속감소 등의 기술을 종합적으로 활용하여 제한된 공간내에서 효과를 극대화할 수 있는 구조개발이 필요하며 본 연구에 적용하였다. (4) 본 연구의 '정음유로구조'는 차음효과, 유로길이 증가에 의한 감쇠효과, 흡음효과를 극대화할 수 있는 구조이다. (5) 팬모타의 진동모드는 회전축을 중심으로 원운동을 하며, 진동량은 흡입구와 뒷쪽 베어링부위가 가장 작으므로 회전축에 가까운 곳을 지지하는 것이 방진에 유리하다. (6) 본 구조에서 사용된 케이싱은 484Hz의 고유진동수 성분을 가지며 이는 모타와 공진할 우려가 있다. 이에 공진주파수 성분의 진동량이 가장 작은 전면과 후면의 중앙부를 지지하여 진동을 줄일 수 있었다. (7) 본체소음의 전반적인 저감에 따라 흡입구 등에서 발생하는 공기마찰소음의 영향이 상대적으로 커지며, 따라서 흡입구의 유선형 설계 및 누설소음의 흡음, 차폐 등의 역할이 중요한 관리 요소로 된다.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.254-262
• /
• 2013

The purpose of this study is to examine recent trends in the welfare field of Public Administration. Research trends in the welfare field of Public Administration show that welfare-related research has rapidly and quantitatively expanded since 2000 and there were many studies using theories. In addition, it has been discovered that there have been many welfare-related and government centered studies that used empirical (statistical) analysis. On the other hand, the centrality of research keywords was analyzed by using language network methodology. "welfare" was set as the central axis and "Policy", "deciding factor", "ideology" were set as a small central axis. The research keywords, such as "OECD", "elderly", "local government", "service", "nation", "regions", "administration", "satisfaction", "women", "market","budget"were influencing.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.30-35
• /
• 2011

This study investigates the optimum section properties of newly developed steel-concrete composite beam. For that purpose we developed computer program calculating section properties. The suggested new beam section highly contribute to save inter-story height and reduce construction duration and cost compared with conventional steel works such as H-beam and column + RC slab system. But the section shape have different section modulus with upper and lower fiber because of the unsymmetric cross section. Therefore the parametric study on thickness-ratio of top and bottom flange plate is needed. In this paper the change of neutral axis and section modulus for thickness-ratio of up and down flage plate is analysed and discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.232-234
• /
• 2017

In this research, the BLDC motor 2 axis controller was designed using a dual core processor. The controller used TMS320F28377D which is TI's latest dual-core DSP, and the BLDC motor was selected with the position of resolver having high reliavility and the speed sensor built-in type motor.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.5
• /
• pp.43-52
• /
• 2014

In this paper, we propose Gravity Removal and Vector Rotation algorithm for counting steps of wearable device, and we evaluated the proposed GRVR algorithm with Micro-Electro-Mechanical (MEMS) 3-axis accelerometer equipped in low-power wearable device while the device is mounted on various positions of a walking or running person. By applying low-pass filter, the gravity elements are canceled from acceleration on each axis of yaw, pitch and roll. In addition to DC-bias removal and the low-pass filtering, the proposed GRVR calculates acceleration only on the yaw-axis while a person is walking or running thus we count the step even if the wearable device's axis are rotated during walking or running. The experimental result shows 99.4% accuracies for the cases where the wearable device is mounted in the middle and on the right of the belt, and 91.1% accuracy which is more accurate than 83% of commercial 3-axis pedometer when worn on wrist for the case of axis-rotation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.12
• /
• pp.1286-1299
• /
• 1991

In this paper we present a multiple capture model for common spreading code CDMA packet radio systems with star topology. Basic equations for the collision free, header detection. and multiple capture probabilities are derived at the central receiver. Link performances. including the average number of packet captures, allowable number of simultaneous transmission, and system throughput are theoretically evaluated for a hybrid system. combining envelope header detection and differential data detection, Using the Block Oriented Systems Simulator(BOSS), simulations were carried out for the central receivers with envelope or differential geader detection, It is shown that for a threshold approx-imation to the probability of data packet success, the mulyiple capture model significantly improves system throughput.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.3
• /
• pp.200-206
• /
• 1999

This paper describes the stress analysis of a curved beam by using photoelasticity. In order to measure accurate isochromatic fringe orders at certain locations. fringes are doubled and sharpened by digital image processing. After fringe multiplication and sharpening. fringe orders can be read as a quarter order interval (N=0, 1/4, 2/4, 3/4,...). The results obtained from photoelastic experiment are compared with those calculated by using theory. Two results are agreed well even though there are some scatter bands with maximum 8 percent for the results of photoelastic measurements and theoretical calculation. Difference may be occurred due to the slight misalignment of the direction to which axial load is applied in photoelastic experiment. It is confirmed that accurate measurement of stress distribution can be possible by using the techniques of fringe multiplication and sharpening in photoelasticity.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.1
• /
• pp.85-88
• /
• 2016

The new rocks of the oceanic crust, like basalt, are created in the mid-oceanic ridge, and the magnetic polarities of the rocks are supposed to be oriented as following the Earth's magnetic field. An extensive magnetic survey of total field at sea level reveals mainly unusual north-south magnetic stripes parallel to the axis of the mid-oceanic ridge, especially in the Atlantic Ocean. From this stripes the Earth's magnetic field is considered as repeatedly 'flipped'(the N pole becoming the S pole, and vice versa) and many times over geological time. The discovery of stripes of alternately normal and reversed-magnetized rocks forming the ocean floor has been a key evidence for the sea-floor spreading, continental drift, and plate tectonics. This study introduces a simple apparatus to explain a possible mechanism of the magnetic reversal in the new oceanic crust, which makes a magnetic stripe adjacent to the mid-oceanic ridge. The apparatus shows a bar magnet effect of adjoined stripes to have a special magnetic polarity on the rocks in the center of the mid-oceanic ridge. The new magnetic stripe seems to be generated not only by Earth's magnetic field, but also by neighbored stripes in the mid-oceanic ridge, acting as a bar magnet.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.796-808
• /
• 2007

In this paper, two novel compact microstrip bandstop filters using complimentary split ring resonators(CSRRs) and spiral resonators is proposed. The first one is the bandstop filter using an array of CSRRs etched on the center line of a microstrip. The bandstop is due to the presence of negative effective permittivity and positive permeability near resonant frequency which prevent the wave propagation. The second on is the bandstop filter using an array of spiral resonators etched on the center line of a microstrip. The bandstop is due to the self-resonance of spiral circuit. We have achieved controllable resonance frequency and bandwidth, super compact dimension, low insertion losses in the passband and high level of rejection in the stopband with sharp cutoff. The electrical sizes of two proposed filter are very small. Additionally, they can be easily fabricated and compatible with MMIC or PCB technology.