• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.919-925
• /
• 2022

This study is an image reconstruction method after cervical CT scan. According to the oblique coronal reconstruction angle, i would like to suggest the reconstruction angle that can best express neural foraminal bony stricture. The angle created by drawing a line passing through the center of the spinal cord in the midsagittal plane of the cervical spine and the uncovertebral joint was measured. A line passing through the center of the spinal cord was drawn from the neural foramen, and the angle formed with the midsagittal plane was measured and compared. At the C4-5 level, the average was 9.2°, at the C5-6 level, the average was 9.9°, and at the C6-7 level, the average was 8.4°, the neural foraminal angle was measured to be larger than the uncovertebral joint angle. There was a statistically significant difference in mean (p<0.01). Also, it was found that the angle increased toward the lower cervical vertebrae. The angle between the neural foramen of the lower cervical vertebrae (C5-6, C6-7) and the center of the spinal cord is between 55 and 60°. Here, if the oblique coronal image is reconstructed to be 90°, the degree of neural foramen stenosis can be observed well. Because it is an image reconstruction using a conventional CT scan image, it does not receive additional radiation exposure. It is of great significance in diagnosing cervical neural foramen bony stenosis.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.3
• /
• pp.261-269
• /
• 2004

The existing concrete beams can be retrofitted or reinforced by attaching carbon fiber or glass fiber sheet beneath the beams. Although diverse design methods and application techniques of the retrofitting are studied and developed, the testing method of examining retrofitted beams have not been put into practice yet. In this study, a bond delamination has been modeled and studied to provide a basis for the development of actual testing equipments. For this purpose, Gaussian and sinusoidal waves with 3GHz and 5GHz center frequency are used as an incident wave and 1mm and 3mm bond delamination under the reinforcement are modeled. In the modeling, Finite Difference-Time Domain algorithm is used to investigate the behavior of electromagnetic waves in concrete. The results have shown that 5GHz waves are suitable for the detection of delamination.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.3
• /
• pp.71-83
• /
• 2008

In this paper, the basic principle, the application and the limitation of Infrared thermography technique to detect defects in different kinds of concrete structures are reviewed. Considered are voids beneath the concrete surface with experiments, delamination between concrete surface and fiber reinforced polymer sheet, the deterioration of steel bars in reinforced concrete, surface defects in historical buildings, pavements, bridges, and railway track graves. As a result, we conclude that infrared thermography methods are useful for fast detecting defects; however, they are influenced by environmental factors, specially temperature. Therefore it is recommended to use the infrared thermography technique with other NDT equipments to expect better result.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.239-247
• /
• 2014

The CTSIB (Clinical Test of Sensory Integration on Balance) using high sensitive pressure sensors is normally used to assess the sense of balance in hospital. It takes an objective measurement of the amount of sway that occurs in the body trunk by observing the change in the center of pressure (CoP) on the foot at the upright posture. In this paper, we would like to propose method to easily measure trunk sway in home. Although the Wii balance board(WBB) is used for games, it can measures the center of pressure, which is highly correlated. The Wii remote controller(WRC) is inexpensive compared to the WBB, but it has problems with estimation of trunk sway because it can't measure pressure directly like WBB. We collected data from 10 normal subjects (5 males, 5 females) from two devices in order to compare the CoP from WBB and the center of mass (CoM) from WRC. The results of WRC and WBB was similar when the data were analyzed by the convex hull and ellipse area.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.85-90
• /
• 2013

Core muscle is the most crucial for rehabilitation of patients with musculoskeletal and nervous problem, there is pain, imbalance and functional movement disorder of upper and lower extremities. In this study, low-frequency electrical stimulator was developed for the purpose increasing the activity of rectus abdominis (RA) and the thickness of transverse abdominis (TrA), internal obliquus abdominis (IO), and external obliquus abdominis (EO). Fifteen female in their 20's was divided into a experiment groups (traditional electrical stimulation group, developed electrical stimulation group) and control group. Low-frequency electrical stimulation was performed in experimental groups for 4 times a week, 4 weeks. The muscle activities (RA) by EMG and muscle thickness (TrA, IO, EO) by Ultrasonogrphy imaging were measured, respectively. In the result, the muscle activity of RA and muscle thickness of TrA and EO were significantly increased at developed electrical stimulation group (p<.05). Therefore, the developed low-frequency electrical stimulation is useful for rehabilitation with CNS and PNS subjects.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.6 no.2
• /
• pp.1-8
• /
• 2012

In previous studies, the dynamic exercise equipment just focused on the trunk stabilization exercise. However, our study is targeted at evaluation for the impact on the postural balance of those researches. Twelve male and twelve female subjects were volunteered for the balance training using this system. They had no medical history of backpain for the past six months. Trunk Stability and postural balance training was performed for 15 minutes a day, three times a week duing four weeks. To evaluate characterization of the postural balance using Balance System SD, Evaluation consist of the postural stability test and the postural limit test. As a result, this training with 3D dynamic exercise equipment help subjects improve the postural balance. These results are expected for using basic materials to the elderly with a high risk of falling and trained athletes needed to be a postural control.

• Journal of Korean Institute of Industrial Engineers
• /
• v.41 no.6
• /
• pp.579-587
• /
• 2015

Semiconductor manufacturing industry is a high density integration industry because it generates a vest number of data that takes about 300~400 processes that is supervised by numerous production parameters. It is asked of engineers to understand the correlation between different stages of the manufacturing process which is crucial in reducing production costs. With complex manufacturing processes, and defect processing time being the main cause. In the past, it was possible to grasp the corelation among manufacturing process stages through the engineer's domain knowledge. However, It is impossible to understand the corelation among manufacturing processes nowadays due to high density integration in current semiconductor manufacturing. in this paper we propose a canonical correlation analysis (CCA) using both wafer test voltage variables and fail bit counts variables. using the method we suggested, we can increase the semiconductor yield which is the result of the package test.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.61-68
• /
• 2011

Event-based service technology integrate service to detect events that occur in real time by analyzing the response. Is the core technology for real-time business and ubiquitous service environment construction. Is required event-based service technology on business processes in real-time business environment that providing rapid response to changing and custom service using a variety of information real-time monitoring and analysis in ubiquitous service environment. Last event-driven business processes can be used as a CEP(Complex Event Processing). The core of CEP technology, the event from multiple event sources analysis of events affecting and the way to handle action, is detect complex event to user. In previous studies, an event occurs that continue to perform without the need for partial operations. so many operations and spend a lot of memory is a problem. To solve these problems, event detection technique is proposed that large streams of data without processing any events, registered to configure a complex event occurs when all events in the application layer, complex event processing. The proposed method, first using a bitmap index to manage the event occurs. The complex events of the last event in response to define a trigger event. The occurrence of an event to display a bitmap index, a composite event occurrence of all event to configure the test through the point at which a trigger event occurs. Is proposed, If any event occurs to perform the operation. The proposed scheme perform operations when all event occurs without events having to perform each of the tests. As a result, avoid unnecessary operations and reducing the number of events to handle the increased efficiency of operations.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.409-418
• /
• 2021

Conformal coating is a technology that protects PCB(Printed Circuit Board) and minimizes PCB failures. Since the defects in the coating are linked to failure of the PCB, the coating surface is examined for air bubbles to satisfy the successful conditions of the conformal coating. In this paper, we propose an algorithm for detecting problematic bubbles in high-risk groups by applying image signal processing. The algorithm consists of finding candidates for problematic bubbles and verifying candidates. Bubbles do not appear in visible light images, but can be visually distinguished from UV(Ultra Violet) light sources. In particular the center of the problematic bubble is dark in brightness and the border is high in brightness. In the paper, these brightness characteristics are called valley and mountain features, and the areas where both characteristics appear at the same time are candidates for problematic bubbles. However, it is necessary to verify candidates because there may be candidates who are not bubbles. In the candidate verification phase, we used convolutional neural network models, and ResNet performed best compared to other models. The algorithms presented in this paper showed the performance of precision 0.805, recall 0.763, and f1-score 0.767, and these results show sufficient potential for bubble test automation.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.54-68
• /
• 2001

This paper proposes a new algorithm that detects and separates the occluding and occluded objects in a 2D image. An input image is represented by the attributed graph where a node corresponds to a surface and an arc connecting two nodes describes the adjacency of the nodes in the image. Each end of arc is weighted by relation value which tells the number of edges connected to the surface represented by the node in the opposite side of the arc. In attributed graph, homogeneous nodes pertained to a same object always construct one of three special patterns which can be simply classified by comparison of relation values of the arcs. The experimental results have shown that the proposed algorithm efficiently separates the objects overlapped arbitrarily, and that this approach of separating objects before matching operation reduces the matching time significantly by simplifying the matching problem of overlapped objects as the one of individual single object.