• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.224-224
• /
• 2017

지구온난화로 인한 기후변화 등으로 안전한 하천구조물을 설계하기 위해서는 신뢰할 수 있는 홍수량 산정이 필요하다. 신뢰할 수 있는 홍수량 산정을 위해서는 정도 높은 과거 수문자료가 필요하나 국내의 많은 중소 규모유역이 미계측 유역 또는 과거 수문자료 부족으로 신뢰 할 수 있는 홍수량 산정이 어려운 실정이다. 본 연구에서는 미계측 유역의 홍수량 산정을 위하여 확률분포모형(PDM)의 매개변수 지역화를 수행하였다. 매개변수 지역화 연구를 수행하기 위하여, 금강 25개 유역을 대상으로 유역별 9~18개의 단기홍수수문사상을 선정하였다. 선정된 단기홍수수문사상을 확률분포모형에 적용하기위하여, MCAT (Monte Carlo Analysis Toolbox)을 활용하여 검정 및 검증을 수행하였으며, 목적함수는 수문곡선 모든 구간을 반영하는 NSE (Nash Sutcliffe Efficiency)와 고유량 부분을 반영하는 RMSE (Root Mean Squared Error) - FH를 적용하였다. 각각의 목적함수에 대하여 검정 모형 매개변수와 유역 특성인자의 다중 선형회귀식을 강우유출모형 매개변수 지역화 모형으로 제시하였다. 매개변수 지역화 결과의 평가를 위하여 청주 유역을 미계측 유역으로 가정하였다. 청주 유역에 대하여 지역화 매개변수를 적용한 결과, 17개의 사상 중 11개의 사상에서 NSE 목적함수 값이 0.5이상으로 전체적인 수문곡선의 경향성을 보였으며, 첨두 홍수량은 17개 사상 중 11개 사상에서 관측 첨두 홍수량 값의 20%이내를 제시하여 적합한 결과를 제시하였다. 또한 금강 25개 유역에 Jackknife 방법으로 검정 결과 관측 첨두 홍수량 값 20%이내의 성능을 보이는 사상이 56%를 포함하고 있어 의미있는 지역화 모형을 제시하였다고 판단된다. 본 연구에서 제시한 매개변수 지역화 방법은 미계측 유역의 유출모의에 활용될 수 있음을 확인하였다.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.236-244
• /
• 2020

In this research a suspended solid transport experiment was conducted in the river experiment center to find the characteristics and dispersion of the material. Modeling by the particle dispersion model was also executed to reproduce the suspended solid transport. The suspended solid was consisted of a mixture of silica and water using a mixing equipment, which was then introduced into a real-scale flume and measured with the laser-diffraction based particle size analyzer(LISST) to find the concentration of the material. The comparison between the measured suspended solid concentration using drone images and particle size analyzers, with the model showed a good match overall, which proved the applicability of the model. Along with finding the model applicability, the research showed the potential for suspended solid estimation in high flow situations with high rainfall.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.299-314
• /
• 2007

For the past 20 years, the growth and development of university-design-educational institutes contributed to the industrial development of our country. Due to the technological fluctuation and changes in the industrial structure in the latter half of the 20th century, the enterprise is demanding professionally-oriented design manpower. The principle which appears from instances of the advanced nations is to accommodate the demands in social changes and apply them to educational design programs. In order to respond promptly to the industrial demand especially, the advanced nations adopted "multidisciplinary design education programs" to lead innovation in the area of design globally. The objective of the research consequently is to suggest an educational system and a program through which the designer can be educated to obtain complex knowledge and the technique demanded by the industry and enterprise. Nowadays in order to adapt to a new business environment, designers specially should have both the knowledge and techniques in engineering and business administration. We suggest that the IPDI, a multidisciplinary design educational system and program is made up of the coordinated operation of major classes, on-the-job training connection, educational system for research base creation, renovation design development program for the application and the synthesis of alternative proposals about the training facility joint ownership by connecting with the education of design, business administration and engineering.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.1
• /
• pp.64-72
• /
• 2009

The method to generate a digital elevation model(DEM) from contour lines causes a problem in which the low relief landform cannot be clearly presented due to the fact that it is significantly influenced by the expression of micro landform elements according to the interval of contours. Thus, this study attempts to develop a landcover burning method that recovers the micro relief landform of the DEM, which applies buffering and map algebra methods by inputting the elevation information to the landcover. In the recovering process of the micro landform, the DEM was recovered using the buffering method and elevation information through the map algebra for the landcover element for the micro landform among the primary DEM generation, making landcover map, and landcover elements. The recovering of the micro landform was applied based on stream landforms. The recovering of landforms using the buffering method was performed for the bar, which is a polygonal element, and wetland according to the properties of concave/convex through generating contours with a uniform interval in which the elevation information applied to the recovered landform. In the case of the linear elements, such as bank, road, waterway, and tributary, the landform can be recovered by using the elevation information through applying a map algebra function. Because the polygonal elements, such as stream channel, river terrace, and artificial objects (farmlands) are determined as a flat property, these are recovered by inputting constant elevation values. The results of this study were compared and analyzed for the degree of landform expression between the original DEM and the recovered DEM. In the results of the analysis, the DEM produced by using the conventional method showed few expressions in micro landform elements. The method developed in this study well described wetland, bar, landform around rivers, farmland, bank, river terrace, and artificial objects. It can be expected that the results of this study contribute to the classification and analysis of micro landforms, plain and the ecology and environment study that requires the recovering of micro landforms around streams and rivers.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.98-98
• /
• 2011

중소규모 하천에서 많이 설치되어 있는 경사형보를 대상으로 하류부 세굴에 대한 수리모형실험과 수치모의를 통하여 경사형보 하류부 세굴특성과 세굴영향인자들에 대한 민감도 분석을 실시하였다. 수리모형실험은 폭 0.8m, 길이 20m의 가변경사 직선 개수로에서 1 : 2(H/L)경사를 가지는 경사형보의 높이, 월류수심, 하류부 수심 변화에 따른 최대 세굴심과 세굴길이의 변화를 관측하였고, 수치모의는 유사이동 모의가 가능한 3차원 수치모형인 FLOW-3D를 이용하여 경사형 보의 경사 변화에 따른 하류부 세굴특성을 모의하였다. 수리모형실험 결과 최대 세굴심 및 세굴길이에 가장 영향을 크게 미치는 인자는 월류고이며, 하류부 수심은 최대 세굴심과 세굴길이의 감소효과 뿐만 아니라 세굴공의 형상에도 영향을 미쳤다. 낙하류의 유입 각도가 예연보에 비하여 작은 경사보는 예연보에 비하여 수평방향 유속이 상대적으로 증가하여 세굴길이가 증가하였으며 이로 인하여 세굴공 하류부 천이영역의 사면경사가 상대적으로 완만하게 형성되었다. 세굴공의 상류부에 재순환 영역이 발생되어 천이영역에서 이송되는 유사의 최대세굴심 발생 위치에 퇴적되는 현상을 방해하며 세굴공의 모양은 완전히 발달된 이중(double) 세굴공을 생성하였으며, 특히 낙하류의 유입각도와 하류부 수위의 영향으로 하류수심($h_t$)과 낙차고(H)의 비($h_t/H$)가 1.0 미만인 경우에 이중(double) 세굴공이 발생하였다. 경사형보의 경사각 영향에 따른 하류부 세굴 영향은 3차원 수치모형을 이용하여 모의하였으며, 경사각을 1V/2H, 1V/3H, 1V/4H로 변화시키며 수치모의를 수행하였다. 수치모의 결과 경사각이 증가할수록 최대 세굴심은 증가하는 경향을 보이고 그에 따른 증가율은 감소하였다. 보 높이, 월류고, 하류부 수심, 경사각 변화에 따른 세굴심의 변화는 상대민감도 방법을 이용하여 비교하였으며 주요 영향인자에 대한 민감도비는 월류고가 보 하류부 세굴에 가장 큰 영향을 미치고, 경사각, 보 높이, 하류부 수심 순이다. 특히 보 하류부의 수심은 음의 민감도를 보이며, 이는 보 하류부 수심이 증가할수록 세굴심이 감소하는 것을 의미한다. 추후 보완 실험 및 수치모의를 추가 활용한다면, 경사형보 하류부 물받이 및 하상보호공 설계를 위한 정량적인 기초자료를 제공할 수 있을 것으로 판단된다.

• Journal of Korean Society of Disaster and Security
• /
• v.11 no.1
• /
• pp.31-38
• /
• 2018

The 99.1% of small dam and most of the levees in Korea are soil dam which can be constructed with lower cost and less effort compared with ones made of concrete. However, they are so vulnerable to overflow. Sudden collapses of these strucrues lead to increase flow rate rapidly, which may cause catastrophic problems in downstream regions. In this study, the experimental study on the collapse delay effect of riprap that was laid on slope of soil levee was carried out. A prismatic rectangular open channel was used and three different sizes of the riprap were installed on slope of a scaled earth dam. A new formula for the collapse time of the levee with the installation of riprap was presented, using the previous researches and the dimensional analysis. In this process, an unsteady flow condition was considered to derive the deviation time of the riprap. And additional experiments were conducted to understand the effect of reinforcement of riprap, and it was found that the reinforcement of riprap was more effective than twice sizing of intial riprap. If the collapse time is delayed, EAP (Emergency Action Plan) and forecasting can greatly reduce the degree of flood damage. Also, it will be meaningful that the results of this study are used for river design.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.2
• /
• pp.99-106
• /
• 2007

This study was focused on understanding the agricultural non-point sources pollution in 72 rural catchments of Nakdong river watershed from 2001 to 2005 every two year. Also. Pearson correlations between water quality and basin characteristic were computed. Water quality of this study watershed was better in 2003 than any other period. The water quality of upstream was recorded from 0.040 to 0.510 dS/m in EC, from 3.55 to 22.60 mg/L in DO, from 0.32 to 16.64 mg/L in T-N, from 0.00 to 12.21 mg/L in $NO_3-N$, from 0.000 to 0.860 mg/L in T-P, and from 0.000 to 0.640 mg/L in $PO_4-P$. A the downstream, EC was measured from 0.030 to 0.520 dS/m, DO from 4.13 to 18.36 mg/L, T-N from 0.38 to 26.88 mg/L, $NO_3-N$ from 0.10 to 20.12 mg/L, T-P from 0.002 to 0.820 mg/L, $PO_4-P$ from 0.002 to 0.690 mg/L. But there was no difference between upstream and downstream for the water quality. Based on the correlation analysis between water quality and land use, correlation between BOD and residential was the highest positive correlation of 0.541 (p<0.01), and correlation between $PO_4-P$ and forest was the highest negative correlation of -0.451 (p<0.01). Also, T-N, $NO_3-N$, and pH were not correlated with all basin characteristics and basin was not correlated with all water quality parameter. According to the correlation residential was causative of growing worst for water quality, and forest was causative of improving for water quality.

• Journal of Korea Water Resources Association
• /
• v.56 no.1
• /
• pp.53-62
• /
• 2023

Recently, due to the influence of climate change, the occurrence of damage to heavy rain is increasing around the world, and the frequency of heavy rain with a large amount of rain in a short period of time is also increasing. Heavy rains generate a large amount of outflow in a short time, causing flooding in the downstream part of the mountainous area before joining the small and medium-sized rivers. In order to reduce damage to downstream areas caused by flooding, it is very important to calculate the outflow of mountainous areas due to torrential rains. However, the sewage network flooding analysis, which is currently conducting the most analysis in Korea, uses the time and area method using the existing data rather than calculating the rainfall outflow in the mountainous area, which is difficult to determine that the soil characteristics of the region are accurately applied. Therefore, if the rainfall is analyzed for mountainous areas that can cause flooding in the downstream area in a short period of time due to large outflows, the accuracy of the analysis of flooding characteristics that can occur in the downstream area can be improved and used as data for evacuating residents and calculating the extent of damage. In order to calculate the rainfall outflow in the mountainous area, the rainfall outflow in the mountainous area was calculated using MIKE SHE among the MIKE series, and the flooding analysis in the downstream area was conducted through MIKE 21 FM (Flood model). Through this study, it was possible to confirm the amount of outflow and the time to reach downstream in the event of rainfall in the mountainous area, and the results of this analysis can be used to protect human and material resources through pre-evacuation in the downstream area in the future.